Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userObserved asteroid surface area in the thermal infrared
178
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroids surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, small fractions of the surface contribute the majority of thermally emitted flux. Calculating observed areas could enable the production of spatially-resolved thermal inertia maps from non-resolved observations of asteroids.
rate research
Read More
We describe the first determination of thermal properties and size of the M-type asteroid (16) Psyche from interferometric observations obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer. We used a thermophysical model to interpret our interferometric data. Our analysis shows that Psyche has a low macroscopic surface roughness. Using a convex 3-D shape model obtained by Kaasalainen et al. (2002, Icarus 159, 369-395), we derived a volume-equivalent diameter for (16) Psyche of 247 +- 25 km or 238 +- 24 km, depending on the possible values of surface roughness. Our corresponding thermal inertia estimates are 133 or 114 J.m-2.s-0.5.K-1, with a total uncertainty estimated to 40 J.m-2.s-0.5.K-1. They are among the highest thermal inertia values ever measured for an asteroid of this size. We consider this as a new evidence of a metal-rich surface for the asteroid (16) Psyche.
We describe interferometric observations of the asteroid (41) Daphne in the thermal infrared obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer (VLTI). We derived the size and the surface thermal properties of (41) Daphne by means of a thermophysical model (TPM), which is used for the interpretation of interferometric data for the first time. From our TPM analysis, we derived a volume equivalent diameter for (41) Daphne of 189 km, using a non-convex 3-D shape model derived from optical lightcurves and adaptive optics images (B. Carry, private communication). On the other hand, when using the convex shape of Kaasalainen et al. (2002. Icarus 159, 369-395) in our TPM analysis, the resulting volume equivalent diameter of (41) Daphne is between 194 and 209 km, depending on the surface roughness. The shape of the asteroid is used as an a priori information in our TPM analysis. No attempt is made to adjust the shape to the data. Only the size of the asteroid and its thermal parameters (albedo, thermal inertia and roughness) are adjusted to the data. We estimated our model systematic uncertainty to be of 4% and of 7% on the determination of the asteroid volume equivalent diameter depending on whether the non-convex or the convex shape is used, respectively. In terms of thermal properties, we derived a value of the surface thermal inertia smaller than 50 J m-2 s-0.5 K-1 and preferably in the range between 0 and 30 J m-2 s-0.5 K-1. Our TPM analysis also shows that Daphne has a moderate macroscopic surface roughness.
We present thermal observations of Ganymede from the Atacama Large Millimeter Array (ALMA) in 2016-2019 at a spatial resolution of 300-900 km (0.1-0.2 angular resolution) and frequencies of 97.5, 233, and 343.5 GHz (wavelengths of 3, 1.3, and 0.87 mm); the observations collectively covered all Ganymede longitudes. We determine the global thermophysical properties using a thermal model that considers subsurface emission and depth- and temperature-dependent thermophysical and dielectric properties, in combination with a retrieval algorithm. The data are sensitive to emission from the upper $sim$0.5 meter of the surface, and we find a millimeter emissivity of 0.75-0.78 and (sub)surface porosities of 10-40%, corresponding to effective thermal inertias of 400-800 J m^{-2} K^{-1} s^{-1/2}. Combined with past infrared results, as well as modeling presented here of a previously-unpublished Galileo PPR nighttime infrared observation, the multi-wavelength constraints are consistent with a compaction profile whereby the porosity drops from ~85% at the surface to 10{+30/-10}% at depth over a compaction length scale of tens of cm. We present maps of temperature residuals from the best-fit global models which indicate localized variations in thermal surface properties at some (but not all) dark terrains and at impact craters, which appear 5-8 K colder than the model. Equatorial regions are warmer than predicted by the model, in particular near the centers of the leading and trailing hemispheres, while the mid-latitudes (~30-60 degrees) are generally colder than predicted; these trends are suggestive of an exogenic origin.
In order to obtain the substantial information about the surface physics and thermal property of the target asteroid (162173) 1999 JU3, which will be visited by Hayabusa 2 in a sample return mission, with the Advanced Thermal Physical Model (ATPM) we estimate the possible thermal inertia distribution over its surface, and infer the major material composition of its surface materials. In addition, the effective diameter and geometric albedo are derived to be $D_{rm eff}=1.13pm0.03rm~km$, $p_{rm v}=0.042pm0.003$, respectively, and the average thermal inertia is estimated to be about $(300pm50)rm~Jcdot m^{-2}cdot s^{-0.5}cdot K^{-1}$. According to the derived thermal inertia distribution, we infer that the major area on the surface of the target asteroid may be covered by loose materials, such as rock debris, sands, and so on, but few bare rocks may exist in a very small region. In this sense, the sample return mission of Hayabusa 2 is feasible, when it is performed successfully, it will certainly bring significant scientific information to the research of asteroids.
We present the results of an unbiased asteroid survey in the mid-infrared wavelength with the Infrared Camera (IRC) onboard the Japanese infrared satellite AKARI. About 20% of the point source events recorded in the AKARI All-Sky Survey observations are not used for the IRC Point Source Catalog (IRC-PSC) in its production process because of the lack of multiple detection by position. Asteroids, which are moving objects on the celestial sphere, remain in these residual events. We identify asteroids out of the residual events by matching them with the positions of known asteroids. For the identified asteroids, we calculate the size and albedo based on the Standard Thermal Model. Finally we have a brand-new catalog of asteroids, named the Asteroid Catalog Using Akari (AcuA), which contains 5,120 objects, about twice as many as the IRAS asteroid catalog. The catalog objects comprise 4,953 main belt asteroids, 58 near Earth asteroids, and 109 Jovian Trojan asteroids. The catalog will be publicly available via the Internet.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
