No Arabic abstract
High spin-orbit torques (SOTs) generated by topological materials and heavy metals interfaced with a ferromagnetic layer show promise for next generation magnetic memory and logic devices. SOTs generated from the in-plane spin polarization along y-axis originated by the spin Hall and Edelstein effects can switch magnetization collinear with the spin polarization in the absence of external magnetic fields. However, an external magnetic field is required to switch the magnetization along x and z-axes via SOT generated by y-spin polarization. Here, we present that the above limitation can be circumvented by unconventional SOT in magnetron-sputtered thin film MnPd3. In addition to the conventional in-plane anti-damping-like torque due to the y-spin polarization, out-of-plane and in-plane anti-damping-like torques originating from z-spin and x-spin polarizations, respectively have been observed at room temperature. The spin torque efficiency corresponding to the y-spin polarization from MnPd3 thin films grown on thermally oxidized silicon substrate and post annealed at 400 Deg C is 0.34 - 0.44. Remarkably, we have demonstrated complete external magnetic field-free switching of perpendicular Co layer via unconventional out-of-plane anti-damping-like torque from z-spin polarization. Based on the density functional theory calculations, we determine that the observed x- and z- spin polarizations with the in-plane charge current are due to the low symmetry of the (114) oriented MnPd3 thin films. Taken together, the new material reported here provides a path to realize a practical spin channel in ultrafast magnetic memory and logic devices.
The spin currents generated by spin-orbit coupling (SOC) in the nonmagnetic metal layer or at the interface with broken inversion symmetry are of particular interest and importance. Here, we have explored the spin current generation mechanisms through the spin-orbit torques (SOTs) measurements in the Ru/Fe heterostructures with weak perpendicular magnetic anisotropy (PMA). Although the spin Hall angle (SHA) of Ru is smaller than that in Pt, Ta or W, reversible SOT in Ru/Fe heterostructures can still be realized. Through non-adiabatic harmonic Hall voltage measurements and macrospin simulation, the effective SHA in Ru/Fe heterostructures is compared with Pt. Moreover, we also explore that the spin current driven by interface strongly depends on the electrical conductivities. Our results suggest a new method for efficiently generating finite spin currents in ferromagnet/nonmagnetic metal bilayers, which establishes new opportunities for fundamental study of spin dynamics and transport in ferromagnetic systems.
Current induced spin-orbit torques have been studied in ferromagnetic nanowires made of 20 nm thick Co/Pd multilayers with perpendicular magnetic anisotropy. Using Hall voltage and lock-in measurements, it is found that upon injection of an electric current both in-plane (Slonczewski-like) and perpendicular (field-like) torques build up in the nanowire. The torque efficiencies are found to be as large as 1.17 kOe and 5 kOe at 108 A/cm2 for the in-plane and perpendicular components, respectively, which is surprisingly comparable to previous studies in ultrathin (~ 1 nm) magnetic bilayers. We show that this result cannot be explained solely by spin Hall effect induced torque at the outer interfaces, indicating a probable contribution of the bulk of the Co/Pd multilayer.
Current-induced spin-orbit torques (SOTs) represent one of the most effective ways to manipulate the magnetization in spintronic devices. The orthogonal torque-magnetization geometry, the strong damping, and the large domain wall velocities inherent to materials with strong spin-orbit coupling make SOTs especially appealing for fast switching applications in nonvolatile memory and logic units. So far, however, the timescale and evolution of the magnetization during the switching process have remained undetected. Here, we report the direct observation of SOT-driven magnetization dynamics in Pt/Co/AlO$_x$ dots during current pulse injection. Time-resolved x-ray images with 25 nm spatial and 100 ps temporal resolution reveal that switching is achieved within the duration of a sub-ns current pulse by the fast nucleation of an inverted domain at the edge of the dot and propagation of a tilted domain wall across the dot. The nucleation point is deterministic and alternates between the four dot quadrants depending on the sign of the magnetization, current, and external field. Our measurements reveal how the magnetic symmetry is broken by the concerted action of both damping-like and field-like SOT and show that reproducible switching events can be obtained for over $10^{12}$ reversal cycles.
Deterministic magnetization switching using spin-orbit torque (SOT) has recently emerged as an efficient means to electrically control the magnetic state of ultrathin magnets. The SOT switching still lacks in oscillatory switching characteristics over time, therefore, it is limited to bipolar operation where a change in polarity of the applied current or field is required for bistable switching. The coherent rotation based oscillatory switching schemes cannot be applied to SOT because the SOT switching occurs through expansion of magnetic domains. Here, we experimentally achieve oscillatory switching in incoherent SOT process by controlling domain wall dynamics. We find that a large field-like component can dynamically influence the domain wall chirality which determines the direction of SOT switching. Consequently, under nanosecond current pulses, the magnetization switches alternatively between the two stable states. By utilizing this oscillatory switching behavior we demonstrate a unipolar deterministic SOT switching scheme by controlling the current pulse duration.
Topological insulators (TIs) with spin momentum locked topological surface states (TSS) are expected to exhibit a giant spin-orbit torque (SOT) in the TI/ferromagnet systems. To date, the TI SOT driven magnetization switching is solely reported in a Cr doped TI at 1.9 K. Here, we directly show giant SOT driven magnetization switching in a Bi2Se3/NiFe heterostructure at room temperature captured using a magneto-optic Kerr effect microscope. We identify a large charge to spin conversion efficiency of ~1-1.75 in the thin TI films, where the TSS is dominant. In addition, we find the current density required for the magnetization switching is extremely low, ~6x10^5 A cm-2, which is one to two orders of magnitude smaller than that with heavy metals. Our demonstration of room temperature magnetization switching of a conventional 3d ferromagnet using Bi2Se3 may lead to potential innovations in TI based spintronic applications.