Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRegular Arrays of Pt Clusters on Alumina: A New Superstructure on Al$_2$O$_3$/Ni$_3$Al (111)
77
0
0.0
(
0
)
Authors
Georges Sitja
Ask ChatGPT about the research
No Arabic abstract
Alumina ultrathin films obtained by high temperature oxidation of a Ni$_3$Al (111) surface are a good template to grow regular arrays of metal clusters. Up to now two hexagonal organizations called dot and network structures have been observed with distances between clusters of 4.1 and 2.4 nm, respectively. In the present article we report on an investigation by in situ Grazing Incidence Small Angle X-ray Scattering (GISAXS), showing that Pt deposited at room temperature (RT) and for a low coverage forms a new hexagonal structure with a distance between clusters of 1.38 nm. For the first time, an assembly of tiny Pt clusters (1-6 atoms) with a very high density (5.85x10 13 cm$^{-2}$) and presenting a good organization on an alumina surface, is obtained. This system could be used to investigate by surface science techniques the new emerging field of Single Atom Catalysis (SAC). By deposition at 573 K small Pt clusters are organized on the network structure. By deposition of Pt at 573 K on pre-formed Pd seeds, large Pt (Pd) clusters containing a hundred of atoms are organized on the dot structure and they remain organized up to 733 K. We show that the three structures are interrelated. The different organizations of the Pt clusters on the alumina surface are explained by the presence of 3 types of sites corresponding to different adsorption energy for Pt atoms.
rate research
Read More
We employ the Monte-Carlo Basin-Hopping (MC-BH) global optimisation technique with inter- atomic pair potentials to generate low-energy candidates of stoichiometric alumina octomers ((Al$_2$O$_3$)$_8$). The candidate structures are subsequently refined with density functional theory calculations employing hybrid functionals (B3LYP and PBE0) and a large basis set (6-311+G(d)) including a vibrational analysis. We report the discovery of a set of energetically low-lying alumina octomer clusters, including a new global minimum candidate, with shapes that are elongated rather than spherical. We find a stability limit for these and smaller-sized clusters at a temperature of $Tsimeq1300-1450$ K corresponding to a phase transition in liquid alumina.
I use first principles calculations to investigate the thermal conductivity of $beta$-In$_2$O$_3$ and compare the results with that of $alpha$-Al$_2$O$_3$, $beta$-Ga$_2$O$_3$, and KTaO$_3$. The calculated thermal conductivity of $beta$-In$_2$O$_3$ agrees well with the experimental data obtain recently, which found that the low-temperature thermal conductivity in this material can reach values above 1000 W/mK. I find that the calculated thermal conductivity of $beta$-Ga$_2$O$_3$ is larger than that of $beta$-In$_2$O$_3$ at all temperatures, which implies that $beta$-Ga$_2$O$_3$ should also exhibit high values of thermal conductivity at low temperatures. The thermal conductivity of KTaO$_3$ calculated ignoring the temperature-dependent phonon softening of low-frequency modes give high-temperature values similar that of $beta$-Ga$_2$O$_3$. However, the calculated thermal conductivity of KTaO$_3$ does not increase as steeply as that of the binary compounds at low temperatures, which results in KTaO$_3$ having the lowest low-temperature thermal conductivity despite having acoustic phonon velocities larger than that of $beta$-Ga$_2$O$_3$ and $beta$-In$_2$O$_3$. I attribute this to the fact that the acoustic phonon velocities at low frequencies in KTaO$_3$ is less uniformly distributed because its acoustic phonon branches are more dispersive compared to the binary oxides, which causes enhanced momentum loss even during the normal phonon-phonon scattering processes. I also calculate thermal diffusivity using the theoretically obtained thermal conductivity and heat capacity and find that all four materials exhibit the expected $T^{-1}$ behavior at high temperatures. Additionally, the calculated ratio of the average phonon scattering time to Planckian time is larger than the lower bound of 1 that has been observed empirically in numerous other materials.
Films of (111)-textured Cu, Ni, and Cu$_x$Ni$_y$ were evaluated as substrates for chemical vapor deposition of graphene. A metal thickness of 400 nm to 700 nm was sputtered onto a substrate of $alpha-$Al$_2$O$_3$(0001) at temperatures of 250 C to 650 C. The films were then annealed at 1000 C in a tube furnace. X-ray and electron backscatter diffraction measurements showed all films have (111) texture but have grains with in-plane orientations differing by $60^{circ}$. The in-plane epitaxial relationship for all films was $[110]_{metal}$||$[10bar{1}0]_{{Al}_{2}{O}_{3}}$. Reactive sputtering of Al in O$_2$ before metal deposition resulted in a single in-plane orientation over 97 % of the Ni film but had no significant effect on the Cu grain structure. Transmission electron microscopy showed a clean Ni/Al$_2$O$_3$ interface, confirmed the epitaxial relationship, and showed that formation of the $60^{circ}$ twin grains was associated with features on the Al$_2$O$_3$ surface. Increasing total pressure and Cu vapor pressure during annealing decreased the roughness of Cu and and Cu$_x$Ni$_y$ films. Graphene grown on the Ni(111) films was more uniform than that grown on polycrystalline Ni/SiO$_2$ films, but still showed thickness variations on a much smaller length scale than the distance between grains.
In all archetypical reported (001)-oriented perovskite heterostructures, it has been deduced that the preferential occupation of two-dimensional electron gases is in-plane $d_textrm{xy}$ state. In sharp contrast to this, the investigated electronic structure of a spinel-perovskite heterostructure $gamma$-Al$_2$O$_3$/SrTiO$_3$ by resonant soft X-ray linear dichroism, demonstrates that the preferential occupation is out-of-plane $d_textrm{xz}$/$d_textrm{yz}$ states for interfacial electrons. Moreover, the impact of strain further corroborates that this anomalous orbital structure can be linked to the altered crystal field at the interface and symmetry breaking of the interfacial structural units. Our findings provide another interesting route to engineer emergent quantum states with deterministic orbital symmetry.
We experimentally investigate the current-induced magnetization reversal in Pt/[Co/Ni]$_3$/Al multilayers combining the anomalous Hall effect and magneto-optical Kerr effect techniques in crossbar geometry. The magnetization reversal occurs through nucleation and propagation of a domain of opposite polarity for a current density of the order of 0.3 TA/m$^2$. In these experiments we demonstrate a full control of each stage: i)the {O}rsted field controls the domain nucleation and ii) domain-wall propagation occurs by spin torque from the Pt spin Hall effect. This scenario requires an in-plane magnetic field to tune the domain wall center orientation along the current for efficient domain wall propagation. Indeed, as nucleated, domain walls are chiral and Neel like due to the interfacial Dzyaloshinskii-Moriya interaction.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
