Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCritical spin periods of sub-km-sized cohesive rubble-pile asteroids: dependencies on material parameters
66
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work, we employ a soft-sphere discrete element method with a cohesion implementation to model the dynamical process of sub-km-sized cohesive rubble piles under continuous spinup. The dependencies of critical spin periods $T_c$ on several material parameters for oblate rubble piles with different bulk diameters $D$ are explored. Our numerical simulations show that both the increase of interparticle cohesion and particle shape parameter in our model can strengthen the bodies, especially for the smaller ones. In addition, we find there exists some critical diameter $D_{cri,rho}$ at which the variation trend of $T_c$ with the bulk density $rho$ reverses. Though a greater static friction coefficient $mu_S$ can strengthen the body, this effect attains a minimum at a critical diameter $D_{cri,phi}$ close to $D_{cri,rho}$. The continuum theory (analytical method) is used for comparison and two equivalent critical diameters are obtained. The numerical results were fitted with the analytical method and the ratio of the interparticle cohesion $c$ to the bulk cohesion $C$ is estimated to be roughly 88.3. We find this ratio keeps constant for different $c$ and $rho$, while it strongly depends on the friction angle $phi$. Also, our numerical results further show that the dependency of $T_c$ on $phi$ is opposite from that predicted by the continuum theory when $D$ < $D_{cri,phi}$. Finally, we find that the two critical diameters happen to be close to the diameter when the mean normal stress of the body equals zero, which is the separation between the compressive regime and the tensile regime.
rate research
Read More
The rubble pile spin barrier is an upper limit on the rotation rate of asteroids larger than ~200-300 m. Among thousands of asteroids with diameters larger than ~300 m, only a handful of asteroids are known to rotate faster than 2.0 h, all are in the sub-km range (<=0.6 km). Here we present photometric measurements suggesting that (60716) 2000 GD65, an S-complex, inner-main belt asteroid with a relatively large diameter of 2.3 +0.6-0.7 km, completes one rotation in 1.9529+-0.0002 h. Its unique diameter and rotation period allow us to examine scenarios about asteroid internal structure and evolution: a rubble pile bound only by gravity; a rubble-pile with strong cohesion; a monolithic structure; an asteroid experiencing mass shedding; an asteroid experiencing YORP spin-up/down; and an asteroid with a unique octahedron shape results with a four-peak lightcurve and a 3.9 h period. We find that the most likely scenario includes a lunar-like cohesion that can prevent (60716) 2000 GD65 from disrupting without requiring a monolithic structure or a unique shape. Due to the uniqueness of (60716) 2000 GD65, we suggest that most asteroids typically have smaller cohesion than that of lunar regolith.
We numerically investigate how an asteroids elongation controls the sensitivity of its surface to tidal effects during a distant planetary encounter beyond the Roche limit. We analyze the surface slope and its variation by considering the shape elongation, as well as the spin period and orbital conditions. A more elongated asteroid tends to have a higher slope variation, while there may not be a monotonic increase of the total area having such a variation
There is increasing evidence that many km-sized bodies in the Solar System are piles of rubble bound together by gravity. We present results from a project to map the parameter space of collisions between km-sized spherical rubble piles. The results will assist in parameterization of collision outcomes for Solar System formation models and give insight into fragmentation scaling laws. We use a direct numerical method to evolve the positions and velocities of the rubble pile particles under the constraints of gravity and physical collisions. We test the dependence of the collision outcomes on impact parameter and speed, impactor spin, mass ratio, and coefficient of restitution. Speeds are kept low (< 10 m/s, appropriate for dynamically cool systems such as the primordial disk during early planet formation) so that the maximum strain on the component material does not exceed the crushing strength. We compare our results with analytic estimates and hydrocode simulations. Off-axis collisions can result in fast-spinning elongated remnants or contact binaries while fast collisions result in smaller fragments overall. Clumping of debris escaping from the remnant can occur, leading to the formation of smaller rubble piles. In the cases we tested, less than 2% of the system mass ends up orbiting the remnant. Initial spin can reduce or enhance collision outcomes, depending on the relative orientation of the spin and orbital angular momenta. We derive a relationship between impact speed and angle for critical dispersal of mass in the system. We find that our rubble piles are relatively easy to disperse, even at low impact speed, suggesting that greater dissipation is required if rubble piles are the true progenitors of protoplanets.
Since the discovery of the first exoplanet we have known that other planetary systems can look quite unlike our own. However, until recently we have only been able to probe the upper range of the planet size distribution. The high precision of the Kepler space telescope has allowed us to detect planets that are the size of Earth and somewhat smaller, but no previous planets have been found that are smaller than those we see in our own Solar System. Here we report the discovery of a planet significantly smaller than Mercury. This tiny planet is the innermost of three planets that orbit the Sun-like host star, which we have designated Kepler-37. Owing to its extremely small size, similar to that of Earths Moon, and highly irradiated surface, Kepler-37b is probably a rocky planet with no atmosphere or water, similar to Mercury.
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
