Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNumerical study of tearing mode seeding in tokamak X-point plasma
67
0
0.0
(
0
)
Added by
Dmytro Meshcheriakov
Publication date
2019
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
A detailed understanding of island seeding is crucial to avoid (N)TMs and their negative consequences like confinement degradation and disruptions. In the present work, we investigate the growth of 2/1 islands in response to magnetic perturbations. Although we use externally applied perturbations produced by resonant magnetic perturbation (RMP) coils for this study, results are directly transferable to island seeding by other MHD instabilities creating a resonant magnetic field component at the rational surface. Experimental results for 2/1 island penetration from ASDEX Upgrade are presented extending previous studies. Simulations are based on an ASDEX Upgrade L-mode discharge with low collisionality and active RMP coils. Our numerical studies are performed with the 3D, two fluid, non-linear MHD code JOREK. All three phases of mode seeding observed in the experiment are also seen in the simulations: first a weak response phase characterized by large perpendicular electron flow velocities followed by a fast growth of the magnetic island size accompanied by a reduction of the perpendicular electron velocity, and finally the saturation to a fully formed island state with perpendicular electron velocity close to zero. Thresholds for mode penetration are observed in the plasma rotation as well as in the RMP coil current. A hysteresis of the island size and electron perpendicular velocity is observed between the ramping up and down of the RMP amplitude consistent with an analytically predicted bifurcation. The transition from dominant kink/bending to tearing parity during the penetration is investigated.
rate research
Read More
In large hot tokamaks like JET, the width of the reconnecting layer for resistive modes is determined by semi-collisional electron dynamics and is much less than the ion Larmor radius. Firstly a dispersion relation valid in this regime is derived which provides a unified description of drift-tearing modes, kinetic Alfven waves and the internal kink mode at low beta. Tearing mode stability is investigated analytically recovering the stabilising ion orbit effect, obtained previously by Cowley et al. [Phys. Fluids (29) 3230 1986], which implies large values of the tearing mode stability parameter Delta prime are required for instability. Secondly, at high beta it is shown that the tearing mode interacts with the kinetic Alfven wave and that there is an absolute stabilisation for all Delta prime due to the shielding effects of the electron temperature gradients, extending the result of Drake et. al [Phys. Fluids (26) 2509 1983] to large ion orbits. The nature of the transition between these two limits at finite values of beta is then elucidated. The low beta formalism is also relevant to the m=n=1 tearing mode and the dissipative internal kink mode, thus extending the work of Pegoraro et al. [Phys. Fluids B (1) 364 1989] to a more realistic electron model incorporating temperature perturbations, but then the smallness of the dissipative internal kink mode frequency is exploited to obtain a new dispersion relation valid at arbitrary beta. A diagram describing the stability of both the tearing mode and dissipative internal kink mode, in the space of Delta prime and beta, is obtained. The trajectory of the evolution of the current profile during a sawtooth period can be plotted in this diagram, providing a model for the triggering of a sawtooth crash.
A new force balance model for the EFIT magnetohydrodynamic equilibrium technique for tokamaks is presented which includes the full toroidal flow and anisotropy changes to the Grad-Shafranov equation. The free functions are poloidal flux functions and all non-linear contributions to the toroidal current density are treated iteratively. The parallel heat flow approximation chosen for the model is that parallel temperature is a flux function and that both parallel and perpendicular pressures may be described using parallel and perpendicular temperatures. This choice for the fluid thermodynamics has been shown elsewhere to be the same as a guiding centre kinetic solution of the same problem under the same assumptions. The model reduces identically to the static and isotropic Grad-Shafranov equation in the appropriate limit as different flux functions are set to zero. An analytical solution based on a modified Soloviev solution for non-zero toroidal flow and anisotropy is also presented. The force balance model has been demonstrated in the code EFIT TENSOR, a branch of the existing code EFIT++. Benchmark results for EFIT TENSOR are presented and the more complicated force balance model is found to converge to force balance similarly to the usual EFIT model and with comparable speed.
Transport barrier formation and its relation to sheared flows in fluids and plasmas are of fundamental interest in various natural and laboratory observations and of critical importance in achieving an economical energy production in a magnetic fusion device. Here we report the first observation of an edge transport barrier formation event in a gyrokinetic simulation carried out in a realistic tokamak edge geometry. The results show that turbulent Reynolds stress driven sheared ExB flows act in concert with neoclassical orbit loss to quench turbulent transport and form a transport barrier just inside the last closed magnetic flux surface.
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situations with finite plasma pressure that are stabilised by favourable average curvature in a simple resistive MHD model. We also demonstrate that the same code can also be used to calculate the basis-functions [C J Ham, et al, Plasma Phys. Control. Fusion 54 (2012) 105014] needed to construct Delta.
Through a systematically developed theory, we demonstrate that the motion of instanton identified in [Y. Z. Zhang, Z. Y. Liu, T. Xie, S. M. Mahajan, and J. Liu, Physics of Plasmas 24, 122304 (2017)] is highly correlated to the intermittent excitation and propagation of geodesic acoustic mode (GAM) that are observed in tokamaks. While many numerical simulations have observed the phenomena, it is the first theory that reveals the physical mechanism behind GAM intermittent excitation and propagation. The preceding work is based on the micro-turbulence associated with toroidal ion temperature gradient (ITG) mode, and slab-based phenomenological model of zonal flow. When full toroidal effect are introduced into the system, two branches of zonal flow emerge: the torus-modified low frequency zonal flow (TLFZF), and GAM, necessitating a unified exploration of GAM and TLFZF. Indeed, we observe that the transition (decay) from the caviton to instanton is triggered by a rapid zero-crossing of radial group velocity of drift wave and is found to be strongly correlated with the GAM onset. Many features peculiar to intermittent GAMs, observed in real machines, are thus identified in the numerical experiment. The results will be displayed in figures and in a movie; first for single central rational surface, and then with coupled multiple central rational surfaces. The periodic bursting first shown disappears as being replaced by irregular one, more similar to the intermittent characteristics observed in GAM experiments.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
