Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNano-scale imaging of the full strain tensor of specific dislocations extracted from a bulk sample
62
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manufacture of BCDI samples from bulk materials. Using tungsten as an example, we show that focussed ion beam (FIB) machining can be used to extract, from macroscopic crystals, micron-sized BCDI samples containing specific pre-selected defects. To interpret the experimental data, we develop a new displacement-gradient-based analysis for multi-reflection BCDI. This allows accurate recovery of the full lattice strain tensor from samples containing multiple dislocations. These new capabilities open the door to BCDI as a microscopy tool for studying complex real-world materials.
rate research
Read More
We demonstrate, through 3-dimensional discrete dislocation dynamics simulations, that the com- plex dynamical response of nano and micro crystals to external constraints can be tuned. Under load rate control, strain bursts are shown to exhibit scale-free avalanche statistics, similar to critical phenomena in many physical systems. For the other extreme of displacement rate control, strain burst response transitions to quasi-periodic oscillations, similar to stick-slip earthquakes. External load mode control is shown to enable a qualitative transition in the complex collective dynamics of dislocations from self-organized criticality to quasi-periodic oscillations.
An ensemble of silicon vacancy centers in diamond (ce{SiV-}) is probed using two coherent spectroscopy techniques. Two main distinct families of ce{SiV-} centers are identified using multidimensional coherent spectroscopy, and these families are paired with two orientation groups by comparing spectra from different linear polarizations of the incident laser. By tracking the peak centers in the measured spectra, the full diamond strain tensor is calculated local to the laser spot. Such measurements are made at multiple points on the sample surface and variations in the strain tensor are observed.
The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TKD in SEM is sufficiently high to resolve the details of lattice distortions near individual dislocations. This capability opens a number of new interesting opportunities, for example determining the Burgers vector of an unknown dislocation in a fast and straightforward way.
The stress-driven motion of dislocations in crystalline solids, and thus the ensuing plastic deformation process, is greatly influenced by the presence or absence of various point-like defects such as precipitates or solute atoms. These defects act as obstacles for dislocation motion and hence affect the mechanical properties of the material. Here we combine molecular dynamics studies with three-dimensional discrete dislocation dynamics simulations in order to model the interaction between different kinds of precipitates and a $frac{1}{2}langle 1 1 1rangle$ ${1 1 0}$ edge dislocation in BCC iron. We have implemented immobile spherical precipitates into the ParaDis discrete dislocation dynamics code, with the dislocations interacting with the precipitates via a Gaussian potential, generating a normal force acting on the dislocation segments. The parameters used in the discrete dislocation dynamics simulations for the precipitate potential, the dislocation mobility, shear modulus and dislocation core energy are obtained from molecular dynamics simulations. We compare the critical stresses needed to unpin the dislocation from the precipitate in molecular dynamics and discrete dislocation dynamics simulations in order to fit the two methods together, and discuss the variety of the relevant pinning/depinning mechanisms.
To advance the use of thermally-activated magnetic materials in device applications it is necessary to examine their behaviour on the localised scale in operando conditions. Equi-atomic FeRh undergoes a magnetostructural transition from an antiferromagnetic (AF) to a ferromagnetic (FM) phase above room temperature (~ 75 to 105 {deg}C) and hence is considered a very desirable material for the next generation of novel nanomagnetic or spintronic devices. For this to be realised, we must fully understand the intricate details of AF to FM transition and associated FM domain growth on the scale of their operation. Here we combine in-situ heating with a comprehensive suite of advanced transmission electron microscopy techniques to investigate directly the magnetostructural transition in nano-scale FeRh thin films. Differential phase contrast imaging visualizes the stages of FM domain growth in both cross-sectional and planar FeRh thin films as a function of temperature. Small surface FM signals are also detected due to interfacial strain with the MgO substrate and Fe deficiency after HF etching of the substrate, providing a directional bias for FM domain growth. Our work provides high resolution imaging and quantitative measurements throughout the transition, which were previously inaccessible, and offers new fundamental insight into their potential use in magnetic devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
