Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSubband Beamforming in Coherent Hybrid Massive MIMO Using Eigenbeams
137
0
0.0
(
0
)
Added by
Chris Ng
Publication date
2018
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Hybrid Massive MIMO reduces implementation complexity but only supports beamforming coefficients that are common across all subbands. However, in macro cellular where the channel has limited degrees of freedom, the long-term component of the channel can be decomposed into a set of subband-independent beamforming basis functions referred to as eigenbeams. A Coherent Hybrid Massive MIMO system can form arbitrary linear combinations of the eigenbeams at every subband to mimic Digital Massive MIMO beamforming as observed across all locations in the cell.
rate research
Read More
Over-the-air computation (AirComp) has been recognized as a promising technique in Internet-of-Things (IoT) networks for fast data aggregation from a large number of wireless devices. However, as the number of devices becomes large, the computational accuracy of AirComp would seriously degrade due to the vanishing signal-to-noise ratio (SNR). To address this issue, we exploit the massive multiple-input multiple-output (MIMO) with hybrid beamforming, in order to enhance the computational accuracy of AirComp in a cost-effective manner. In particular, we consider the scenario with a large number of multi-antenna devices simultaneously sending data to an access point (AP) equipped with massive antennas for functional computation over the air. Under this setup, we jointly optimize the transmit digital beamforming at the wireless devices and the receive hybrid beamforming at the AP, with the objective of minimizing the computational mean-squared error (MSE) subject to the individual transmit power constraints at the wireless devices. To solve the non-convex hybrid beamforming design optimization problem, we propose an alternating-optimization-based approach. In particular, we propose two computationally efficient algorithms to handle the challenging receive analog beamforming problem, by exploiting the techniques of successive convex approximation (SCA) and block coordinate descent (BCD), respectively. It is shown that for the special case with a fully-digital receiver at the AP, the achieved MSE of the massive MIMO AirComp system is inversely proportional to the number of receive antennas. Furthermore, numerical results show that the proposed hybrid beamforming design substantially enhances the computation MSE performance as compared to other benchmark schemes, while the SCA-based algorithm performs closely to the performance upper bound achieved by the fully-digital beamforming.
Switch-based hybrid network is a promising implementation for beamforming in large-scale millimetre wave (mmWave) antenna arrays. By fully exploiting the sparse nature of the mmWave channel, such hybrid beamforming reduces complexity and power consumption when compared with a structure based on phase shifters. However, the difficulty of designing an optimum beamformer in the analog domain is prohibitive due to the binary nature of such a switch-based structure. Thus, here we propose a new method for designing a switch-based hybrid beamformer for massive MIMO communications in mmWave bands. We first propose a method for decoupling the joint optimization of analog and digital beamformers by confining the problem to a rank-constrained subspace. We then approximate the solution through two approaches: norm maximization (SHD-NM), and majorization (SHD-QRQU). In the norm maximization method, we propose a modified sequential convex programming (SCP) procedure that maximizes the mutual information while addressing the mismatch incurred from approximating the log-determinant by a Frobenius norm. In the second method, we employ a lower bound on the mutual information by QR factorization. We also introduce linear constraints in order to include frequently-used partially-connected structures. Finally, we show the feasibility, and effectiveness of the proposed methods through several numerical examples. The results demonstrate ability of the proposed methods to track closely the spectral efficiency provided by unconstrained optimal beamformer and phase shifting hybrid beamformer, and outperform a competitor switch-based hybrid beamformer.
In this paper, we consider hybrid beamforming designs for multiuser massive multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) systems. Aiming at maximizing the weighted spectral efficiency, we propose one alternating maximization framework where the analog precoding is optimized by Riemannian manifold optimization. If the digital precoding is optimized by a locally optimal algorithm, we obtain a locally optimal alternating maximization algorithm. In contrast, if we use a weighted minimum mean square error (MMSE)-based iterative algorithm for digital precoding, we obtain a suboptimal alternating maximization algorithm with reduced complexity in each iteration. By characterizing the upper bound of the weighted arithmetic and geometric means of mean square errors (MSEs), it is shown that the two alternating maximization algorithms have similar performance when the user specific weights do not have big differences. Verified by numerical results, the performance gap between the two alternating maximization algorithms becomes large when the ratio of the maximal and minimal weights among users is very large. Moreover, we also propose a low-complexity closed-form method without iterations. It employs matrix decomposition for the analog beamforming and weighted MMSE for the digital beamforming. Although it is not supposed to maximize the weighted spectral efficiency, it exhibits small performance deterioration compared to the two iterative alternating maximization algorithms and it qualifies as a good initialization for iterative algorithms, saving thereby iterations.
In this paper, we propose an energy-efficient radar beampattern design framework for a Millimeter Wave (mmWave) massive multi-input multi-output (mMIMO) system, equipped with a hybrid analog-digital (HAD) beamforming structure. Aiming to reduce the power consumption and hardware cost of the mMIMO system, we employ a machine learning approach to synthesize the probing beampattern based on a small number of RF chains and antennas. By leveraging a combination of softmax neural networks, the proposed solution is able to achieve a desirable beampattern with high accuracy.
Channel estimation and beamforming play critical roles in frequency-division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems. However, these two modules have been treated as two stand-alone components, which makes it difficult to achieve a global system optimality. In this paper, we propose a deep learning-based approach that directly optimizes the beamformers at the base station according to the received uplink pilots, thereby, bypassing the explicit channel estimation. Different from the existing fully data-driven approach where all the modules are replaced by deep neural networks (DNNs), a neural calibration method is proposed to improve the scalability of the end-to-end design. In particular, the backbone of conventional time-efficient algorithms, i.e., the least-squares (LS) channel estimator and the zero-forcing (ZF) beamformer, is preserved and DNNs are leveraged to calibrate their inputs for better performance. The permutation equivariance property of the formulated resource allocation problem is then identified to design a low-complexity neural network architecture. Simulation results will show the superiority of the proposed neural calibration method over benchmark schemes in terms of both the spectral efficiency and scalability in large-scale wireless networks.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
