Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSynthesis and/or grafting of noble metal nanoparticles by microplasma and by atmospheric plasma torch
449
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Plasmas at atmospheric pressure are presented as a simple, fast, and versatile tool for the synthesis or/and the grafting of noble metallic NPs (Au, Pt) on substrates. In this study, noble metal NPs are generated either by the reduction of a gold salt in an aqueous medium by microplasma or either by the decomposition of a platinum or gold organometallic in the post-discharge of an atmospheric plasma torch. The latter can also be used for the grafting of NPs from a commercial colloidal solution
rate research
Read More
In order to break the limitation of plasma nitriding technology,which can be applied to a few nonmetallic gaseous elements, the Double Glow Discharge Phenomenon was found and then invented the Double Glow Plasma Surface Metallurgy Technology. This double glow plasma surface metallurgy technology can use any element in the periodic table of chemical elements for surface alloying of metal materials. Countless surface alloys with special physical and chemical properties have been produced on the surfaces of conductive materials.By using double glow discharge phenomenon,a series of new plasma technologies,such as the double glow plasma graphene technology, double glow plasma brazing technology,double glow plasma sintering technology, double glow plasma nanotechnology,double glow plasma cleaning technology, double glow plasma carburizing without hydrogen and so on, have been invented.A very simple phenomenon of double glow discharge can generate about 10 plasma innovation technologies, which fully shows that there is still a lot of innovation space on the basis of classical physics.This paper briefly introduces the basic principles,functions and characteristics of each technology. The application prospects and development directions of plasma in metal materials and machinery manufacturing industry will also be discussed.
Plasma confinement inside capillaries has been developed in the past years for plasma-based acceleration to ensure a stable and repeatable plasma density distribution during the interaction with either particles or laser beams. In particular, gas-filled capillaries allow a stable and almost predictable plasma distribution along the interaction with the particles. However, the plasma ejected through the ends of the capillary interacts with the beam before the inner plasma, affecting the quality of the beam. In this article we report the measurements on the evolution of the plasma flow at the two ends of a 1 cm long, 1 mm diameter capillary filled with hydrogen. In particular, we measured the longitudinal density distribution and the expansion velocity of the plasma outside the capillary. This study will allow a better understanding of the beam-plasma interaction for future plasma-based experiments.
Metal halide perovskites (MHPs) have become a promising candidate in a myriad of applications, such as light-emitting diodes, solar cells, lasing, photodetectors, photocatalysis, transistors, etc. This is related to the synergy of their excellent features, including high photoluminescence quantum yields, narrow and tunable emission, long charge carrier lifetimes, broad absorption spectrum along with high extinction absorptions coefficients, among others. However, the main bottleneck is the poor stability of the MHPs under ambient conditions. This is imposing severe restrictions with respect to their industrialized applications and commercialization. In this context, metal oxide (MOx) coatings have recently emerged as an efficient strategy towards overcoming the stabilities issues as well as retain the excellent properties of the MHPs, and therefore facilitate the development of the related devices stabilities and performances.This review provides a summary of the recent progress on synthetic methods, enhanced features, the techniques to assess the MHPs-MOxcomposites, and applications of the [email protected], novel approaches to fabricate the composites and new applications of the composites are also reported in this review for the first time. This is rounded by a critical outlook about the current MHPs stability issues and the further direction to ensure a bright future of MHPs@MOx
Inactivation of microorganisms on sensitive surfaces by cold atmospheric plasma (CAP) is one major application in the field of plasma medicine because it provides a simple and effective way to sterilize heat-sensitive materials. Therefore, one has to know whether plasma treatment affects the treated surfaces, and thus causes long-term surface modifications. In this contribution, the effect of cold atmospheric Surface Micro-Discharge (SMD) plasma on different materials and its sporicidal behavior was investigated. Hence, different material samples (stainless steel, different polymers and glass) were plasma-treated for 16 hours, simulating multiple plasma treatments using an SMD plasma device. Afterwards, the material samples were analyzed using surface analysis methods such as laser microscopy, contact angle measurements and X-ray photoelectron spectroscopy (XPS). Furthermore, the device was used to investigate the behavior of Bacillus atrophaeus endospores inoculated on material samples at different treatment times. The interaction results for plasma-treated endospores show, that a log reduction of the spore count between 4.3 and 6.2 can be achieved within 15 min of plasma treatment. Besides, the surface analysis revealed, that there were three different types of reactions the probed materials showed to plasma treatment, ranging from no changes to shifts of the materials free surface energies and oxidation. As a consequence, it should be taken into account that even though cold atmospheric plasma treatment is a non-thermal method to inactivate microorganisms on heatsensitive materials, it still affects surface properties of the treated materials. Therefore, the focus of future work must be a further classification of plasma-caused material modifications.
The AWAKE experiment relies on the self-modulation instability of a long proton bunch to effectively drive wakefields and accelerate an electron bunch to GeV-level energies. During the first experimental run (2016-2018) the instability was made phase reproducible by means of a seeding process: a short laser pulse co-propagates within the proton bunch in a rubidium vapor. Thus, the fast creation of plasma and the onset of beam-plasma interaction within the bunch drives seed wakefields. However, this seeding method leaves the front of the bunch not modulated. The bunch front could self-modulate in a second, preformed plasma and drive wakefields that would interfere with those driven by the (already self-modulated) back of the bunch and with the acceleration process. We present studies of the seeded the self-modulation (SSM) of a long proton bunch using a short electron bunch. The short seed bunch is placed ahead of the proton bunch leading to self-modulation of the entire bunch. Numerical simulations show that this method have other advantages when compared to the ionization front method. We discuss the requirements for the electron bunch parameters (charge, emittance, transverse size at the focal point, length), to effectively seed the self-modulation process. We also present preliminary experimental studies on the electron bunch seed wakefields generation.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
