Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGrowth of strontium ruthenate films by hybrid molecular beam epitaxy
293
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report on the growth of epitaxial Sr2RuO4 films using a hybrid molecular beam epitaxy approach in which a volatile precursor containing RuO4 is used to supply ruthenium and oxygen. The use of the precursor overcomes a number of issues encountered in traditional MBE that uses elemental metal sources. Phase-pure, epitaxial thin films of Sr2RuO4 are obtained. At high substrate temperatures, growth proceeds in a layer-by-layer mode with intensity oscillations observed in reflection high-energy electron diffraction. Films are of high structural quality, as documented by x-ray diffraction, atomic force microscopy, and transmission electron microscopy. The method should be suitable for the growth of other complex oxides containing ruthenium, opening up opportunities to investigate thin films that host rich exotic ground states.
rate research
Read More
SrMoO$_3$ is a promising material for its excellent electrical conductivity, but growing high-quality thin films remains a challenge. Here we synthesized epitaxial films of SrMoO$_3$ using the molecular beam epitaxy (MBE) technique under a low oxygen-flow rate. Introduction of SrTiO$_3$ buffer layers of 4--8 unit cells between the film and the (001)-oriented SrTiO$_3$ or KTaO$_3$ substrate was crucial to remove impurities and/or roughness of the film surface. The obtained film shows improved electrical conductivities as compared with films obtained by other techniques. The high quality of the SrMoO$_3$ film is also verified by angle-resolved photoemission spectroscopy (ARPES) measurements showing clear Fermi surfaces.
Rapid progress of quantum transport study in topological Dirac semimetal, including observations of quantum Hall effect in two-dimensional (2D) Cd$_{mathrm{3}}$As$_{mathrm{2}}$ samples, has uncovered even more interesting quantum transport properties in high-quality and three-dimensional (3D) samples. However, such 3D Cd$_{mathrm{3}}$As$_{mathrm{2}}$ films with low carrier density and high electron mobility have been hardly obtained. Here we report the growth and characterization of 3D thick Cd$_{mathrm{3}}$As$_{mathrm{2}}$ films adopting molecular beam epitaxy. The highest electron mobility ($mu$ = 3 $times$ 10$^{4}$ cm$^{2}$/Vs) among the reported film samples has been achieved at a low carrier density ($textit{n} = 5$ $times$ 10$^{16}$ cm$^{-3}$). In the magnetotransport measurement, Hall plateau-like structures are commonly observed in spite of the 3D thick films ($textit{t} = 120$ nm). On the other hand, field angle dependence of the plateau-like structures and corresponding Shubunikov-de Haas oscillations rather shows a 3D feature, suggesting the appearance of unconventional magnetic orbit, also distinct from the one described by the semiclassical Weyl-orbit equation.
The growth of single layer graphene nanometer size domains by solid carbon source molecular beam epitaxy on hexagonal boron nitride (h-BN) flakes is demonstrated. Formation of single-layer graphene is clearly apparent in Raman spectra which display sharp optical phonon bands. Atomic-force microscope images and Raman maps reveal that the graphene grown depends on the surface morphology of the h-BN substrates. The growth is governed by the high mobility of the carbon atoms on the h-BN surface, in a manner that is consistent with van der Waals epitaxy. The successful growth of graphene layers depends on the substrate temperature, but is independent of the incident flux of carbon atoms.
Two-dimensional crystals are an important class of materials for novel physics, chemistry, and engineering. Germanane (GeH), the germanium-based analogue of graphane (CH), is of particular interest due to its direct band gap and spin-orbit coupling. Here, we report the successful co-deposition growth of CaGe2 films on Ge(111) substrates by molecular beam epitaxy (MBE) and their subsequent conversion to germanane by immersion in hydrochloric acid. We find that the growth of CaGe2 occurs within an adsorption-limited growth regime, which ensures stoichiometry of the film. We utilize in situ reflection high energy electron diffraction (RHEED) to explore the growth temperature window and find the best RHEED patterns at 750 {deg}C. Finally, the CaGe2 films are immersed in hydrochloric acid to convert the films to germanane. Auger electron spectroscopy of the resulting film indicates the removal of Ca and RHEED patterns indicate a single-crystal film with in-plane orientation dictated by the underlying Ge(111) substrate. X-ray diffraction and Raman spectroscopy indicate that the resulting films are indeed germanane. Ex situ atomic force microscopy (AFM) shows that the grain size of the germanane is on the order of a few micrometers, being primarily limited by terraces induced by the miscut of the Ge substrate. Thus, optimization of the substrate could lead to the long-term goal of large area germanane films.
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 {deg}C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
