Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA low-background piston-cylinder type hybrid high pressure cell for muon-spin rotation/relaxation experiments
107
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A low background double-wall piston-cylinder-type pressure cell is developed at the Paul Scherrer Institute. The cell is made from BERLYCO-25 (beryllium copper) and MP35N nonmagnetic alloys with the design and dimensions which are specifically adapted to muon-spin rotation/relaxation (muSR) measurements. The mechanical design and performance of the pressure cell are evaluated using finite-element analysis (FEA). By including the measured stress-strain characteristics of the material into the finite-element model, the cell dimensions are optimized with the aim to reach the highest possible pressure while maintaining the sample space large (6 mm in diameter and 12 mm high). The presented unconventional design of the double-wall piston-cylinder pressure cell with a harder outer MP35N sleeve and asofter inner CuBe cylinder enables pressures of up to 2.6 GPa to be reached at ambient temperatures, corresponding to 2.2 GPa at low temperatures without any irreversible damage to the pressure cell. The nature of the muon stopping distribution, mainly in the sample and in the CuBe cylinder, results in a low-background muSR signal.
rate research
Read More
We present a piezoelectric-driven uniaxial pressure cell that is optimized for muon spin relaxation and neutron scattering experiments, and that is operable over a wide temperature range including cryogenic temperatures. To accommodate the large samples required for these measurement techniques, the cell is designed to generate forces up to 1000 N, and to minimize the background signal the space around the sample is kept as open as possible. We demonstrate here that by mounting plate-like samples with epoxy, a uniaxial stress exceeding 1 GPa can be achieved in an active volume of 5 mm3. We show that for practical operation it is important to monitor both the force and displacement applied to the sample. Also, because time is critical during facility experiments, samples are mounted in detachable holders that can be rapidly exchanged. The piezoelectric actuators are likewise contained in an exchangeable cartridge.
We report measurements of the temperature- and pressure-dependent resistance, $R(T,p)$, of a manganin manometer in a $^4$He-gas pressure setup from room temperature down to the solidification temperature of $^4$He ($T_textrm {solid}sim$ 50 K at 0.8 GPa) for pressures, $p$, between 0 GPa and $sim$0.8 GPa. The same manganin wire manometer was also measured in a piston-cylinder cell from 300 K down to 1.8 K and for pressures between 0 GPa to $sim$2 GPa. From these data, we infer the temperature and pressure dependence of the pressure coefficient of manganin, $alpha(T,p)$, defined by the equation $R_p = (1+alpha p) R_0$ where $R_0$ and $R_p$ are the resistance of manganin at ambient pressure and finite pressure, respectively. Our results indicate that upon cooling $alpha$ first decreases, then goes through a broad minimum at $sim$120 K and increases again towards lower temperatures. In addition, we find that $alpha$ is almost pressure-independent for $Tgtrsim$60 K up to $psim$2 GPa, but shows a pronounced $p$ dependence for $Tlesssim$60K. Using this manganin manometer, we demonstrate that $p$ overall decreases with decreasing temperature in the piston-cylinder cell for the full pressure range and that the size of the pressure difference between room temperature and low temperatures ($T=1.8$ K), $Delta p$, decreases with increasing pressure. We also compare the pressure values inferred from the magnanin manometer with the low-temperature pressure, determined from the superconducting transition temperature of elemental lead (Pb). As a result of these data and analysis we propose a practical algorithm to infer the evolution of pressure with temperature in a piston-cylinder cell.
The time dependence of muon spin relaxation has been measured in high purity aluminum and silver samples in a longitudinal 2 T magnetic field at room temperature, using time-differential musr. For times greater than 10 ns, the shape fits well to a single exponential with relaxation rates of $lambda_{textrm{Al}} = 1.3 pm 0.2,(textrm{stat.}) pm 0.3,(textrm{syst.}),pms$ and $lambda_{textrm{Ag}} = 1.0 pm 0.2,(textrm{stat.}) pm 0.2,(textrm{syst.}),pms$.
This paper reports an investigation on the phase diagram and compressibility of wolframite-type tungstates by means of x-ray powder diffraction and absorption in a diamond-anvil cell and ab initio calculations. The diffraction experiments show that monoclinic wolframite-type MgWO4 suffers at least two phase transitions, the first one being to a triclinic polymorph with a structure similar to that of CuWO4 and FeMoO4-II. The onset of each transition is detected at 17.1 and 31 GPa. In ZnWO4 the onset of the monoclinic-triclinic transition has been also found at 15.1 GPa. These findings are supported by density-functional theory calculations, which predict the occurrence of additional transitions upon further compression. Calculations have been also performed for wolframite-type MnWO4, which is found to have an antiferromagnetic configuration. In addition, x-ray absorption and diffraction experiments as well as calculations reveal details of the local-atomic compression in the studied compounds. In particular, below the transition pressure the ZnO6 and equivalent polyhedra tend to become more regular, whereas the WO6 octahedra remain almost unchanged. Fitting the pressure-volume data we obtained the equation of state for the low-pressure phase of MgWO4 and ZnWO4. These and previous results on MnWO4 and CdWO4 are compared with the calculations, being the compressibility of wolframite-type tungstates systematically discussed. Finally Raman spectroscopy measurements and lattice dynamics calculations are presented for MgWO4.
We report a detailed $mu$SR study of the pressure evolution of the magnetic order in the manganese based pnictide MnP, which has been recently found to undergo a superconducting transition under pressure once the magnetic ground state is suppressed. Using the muon as a volume sensitive local magnetic probe, we identify a ferromagnetic state as well as two incommensurate helical states (with propagation vectors ${bf Q}$ aligned along the crystallographic $c-$ and $b-$directions, respectively) which transform into each other through first order phase transitions as a function of pressure and temperature. Our data appear to support that the magnetic state from which superconductivity develops at higher pressures is an incommensurate helical phase.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
