Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userIrradiation effects in the Ni-17Mo-7Cr alloy bombarded with MeV Au ions
114
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Irradiation effects in Ni-17Mo-7Cr alloy, which is an newly developed structural material for molten salt reactor (MSR), have been systematically investigated by using 3MeV Au ions at different fluences, corresponding to dpa number (displacement per atom) of 1~ 30. GIXRD measurement indicates that the microstrain of the irradiated samples increased from 0.14% to 0.22% as dpa increased from 1 to 30. In the meanwhile, nanoindentation results reveal the Ni-17Mo-7Cr alloy underwent radiation-induced hardening first and then softening at dpa of 30. The swelling rate of Ni-17Mo-7Cr alloy was found around 1.3% at 30 dpa, which means only 0.04% per dpa. Besides, Raman spectra shows that carbon segregation appeared after Au ions irradiation. Our results are very helpful for understanding irradiation damages in Nickel-base alloys, especially for those in purpose of being used in future MSR nuclear energy system.
rate research
Read More
Element-selective techniques are central for the understanding of ultrafast spin dynamics in multi-element materials like magnetic alloys. Recently, though, it turned out that the commonly used technique of transverse magneto-optical Kerr effect (T-MOKE) in the EUV range may have linearity issues including unwanted cross talk between different elemental signals. This problem can be sizeable, which puts recent observations of ultrafast spin transfer from Fe to Ni sites in FeNi alloys into question. In this study, we investigate the Fe-to-Ni spin transfer in a cross-talk-free time-resolved X-ray magnetic circular dichroism (XMCD) experiment with a reliable time reference. We find a very similar Fe and Ni dynamics with XMCD as with T-MOKE from identical samples. Considering the non-linearities of the T-MOKE response, the agreement with our findings appears fortuitous. We discuss possible reasons why T-MOKE seems to give accurate results in this case. Our data provide the ongoing discussion about ultrafast spin-transfer mechanisms in FeNi systems with a sound experimental basis.
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V45Ti30Ni25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) beta matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed
In this paper we show how single layer graphene can be utilized to study swift heavy ion (SHI) modifications on various substrates. The samples were prepared by mechanical exfoliation of bulk graphite onto SrTiO$_3$, NaCl and Si(111), respectively. SHI irradiations were performed under glancing angles of incidence and the samples were analysed by means of atomic force microscopy in ambient conditions. We show that graphene can be used to check whether the irradiation was successful or not, to determine the nominal ion fluence and to locally mark SHI impacts. In case of samples prepared in situ, graphene is shown to be able to catch material which would otherwise escape from the surface.
A two dimensional crystalline layer is found at the surface of the liquid eutectic Au$_{82}$Si$_{18}$ alloy above its melting point $T_M=359 ^{circ}$C. Underlying this crystalline layer we find a layered structure, 6-7 atomic layers thick. This surface layer undergoes a first-order solid-solid phase transition occurring at $371 ^{circ}$C. The crystalline phase observed for T$>$371 $^{circ}$C is stable up to at least 430 $^{circ}$C. Grazing Incidence X-ray Diffraction data at T$>$371 $^{circ}$C imply lateral order comprising two coexisting phases of different oblique unit cells, in stark contrast with the single phase with a rectangular unit cell found for low-temperature crystalline phase $359 ^{circ}$C$<T<371 ^{circ}$C.
Magnetic shape memory Heusler alloys are multiferroics stabilized by the correlations between electronic, magnetic and structural order. To study these correlations we use time resolved x-ray diffraction and magneto-optical Kerr effect experiments to measure the laser induced dynamics in a Heusler alloy Ni$_2$MnGa film and reveal a set of timescales intrinsic to the system. We observe a coherent phonon which we identify as the amplitudon of the modulated structure and an ultrafast phase transition leading to a quenching of the incommensurate modulation within 300~fs with a recovery time of a few ps. The thermally driven martensitic transition to the high temperature cubic phase proceeds via nucleation within a few ps and domain growth limited by the speed of sound. The demagnetization time is 320~fs, which is comparable to the quenching of the structural modulation.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
