Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDesign of a V-Ti-Ni alloy with superelastic nano-precipitates
74
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V45Ti30Ni25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) beta matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed
rate research
Read More
We investigate acoustic emission (AE) that arises during the martensitic transition in a polycrystalline specimen of the prototypical superelastic/elastocaloric alloy Ni$_{50.4}$Ti$_{49.6}$ (at. %) driven using tensile strain. We use two independent AE sensors in order to locate AE events, and focus on contributions to the AE that arise away from the grips of the mechanical testing machine. Significant AE activity is present during the first mechanical loading primarily due to nucleation and growth of wide Luders-like bands during the forward martensitic transition (imaged using visible light and infrared (IR) radiation) that lead to persistent changes in intergranular interactions. AE activity is suppressed during the subsequent reverse martensitic transition on unloading, and in successive loading/unloading cycles, for which the Luders-like bands narrow and modify intergranular interactions to much less extent. After the first loading, we find that the AE activity associated with the martensitic transition is weak, and we suggest that this is because the elastic anisotropy and strain incompatibility in Ni-Ti are low. We also find that the AE activity becomes weaker on mechanically cycling due to increased retained martensite.
Neutron irradiation tends to promote disorder in ordered alloys through the action of the thermal spikes that it generates, while simultaneously introducing point defects and defect clusters. As they migrate, these point defects will promote reordering of the alloys, acting against irradiation-induced disordering. In this study, classical molecular dynamics and a highly parallel accelerated sampling method are used to study the reordering kinetics of Ni$_3$Al under the diffusion of self-interstitial atoms (SIA). By monitoring the order parameter and potential energy from atomistic simulations, we show that the SIA acts as a reordering agent in Ni$_3$Al. A mean-field rate theory model of the interstitialcy-based reordering kinetics is introduced, which reproduces simulation data and predicts reordering at temperatures as low as 500 K.
Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (M$_6$Ni$_{16}$Si$_{7}$) precipitates in an austenite matrix. Using this detector, the faint diffraction spots originating from the small G-phase particles could be resolved simultaneously as the intense matrix reflections. The diffraction patterns were analyzed using a two-stage template matching scheme, whereby the matrix is indexed first and the precipitates are indexed second after subtraction of the matrix contribution to the diffraction patterns. The results show that G-phase forms with orientation relationships relative to austenite that are characteristic of face-centered cubic (FCC) to body-centered cubic (BCC) transformations. This work demonstrates that nano-beam electron diffraction with a pixelated detector is a promising technique to investigate orientation relationships of nano-sized precipitates with complex crystal structures in other material systems with relative ease.
Microstructural analysis of a Mg-Zn alloy deformed at room temperature by high-pressure torsion (HPT) indicates that fine-scale precipitation occurs even without post-deformation heat treatment. Small-angle X-ray scattering detects precipitates with radii between 2.5-20 nm after one rotation, with little increase in particle size or volume fraction after 20 rotations. High resolution electron micrographs identify grain boundary precipitates of monoclinic Mg$_4$Zn$_7$ phase after three rotations and MgZn$_2$ after 20 rotations.
Lattice dynamical methods used to predict phase-transformations in crystals typically evaluate the harmonic phonon spectra and therefore do not work in frequent and important situations where the crystal structure is unstable in the harmonic approximation, such as the $beta$ structure when it appears as a high-temperature phase of the shape memory alloy (SMA) NiTi. Here it is shown by self consistent {it ab initio} lattice dynamical calculations (SCAILD) that the critical temperature for the pre-martensitic $R$ to $beta$ phase-transformation in NiTi can be effectively calculated with good accuracy, and that the $beta$-phase is a result primarily of the stabilizing interaction between different lattice vibrations.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
