Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInterference Alignment for Line-of-Sight Channels
115
0
0.0
(
0
)
Added by
Leonard Grokop
Publication date
2008
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
The fully connected K-user interference channel is studied in a multipath environment with bandwidth W. We show that when each link consists of D physical paths, the total spectral efficiency can grow {it linearly} with K. This result holds not merely in the limit of large transmit power P, but for any fixed P, and is therefore a stronger characterization than degrees of freedom. It is achieved via a form of interference alignment in the time domain. A caveat of this result is that W must grow with K, a phenomenon we refer to as {it bandwidth scaling}. Our insight comes from examining channels with single path links (D=1), which we refer to as line-of-sight (LOS) links. For such channels we build a time-indexed interference graph and associate the communication problem with finding its maximal independent set. This graph has a stationarity property that we exploit to solve the problem efficiently via dynamic programming. Additionally, the interference graph enables us to demonstrate the necessity of bandwidth scaling for any scheme operating over LOS interference channels. Bandwidth scaling is then shown to also be a necessary ingredient for interference alignment in the K-user interference channel.
rate research
Read More
Interference alignment (IA) is a joint-transmission technique that achieves the capacity of the interference channel for high signal-to-noise ratios (SNRs). Most prior work on IA is based on the impractical assumption that perfect and global channel-state information(CSI) is available at all transmitters. To implement IA, each receiver has to feed back CSI to all interferers, resulting in overwhelming feedback overhead. In particular, the sum feedback rate of each receiver scales quadratically with the number of users even if the quantized CSI is fed back. To substantially suppress feedback overhead, this paper focuses on designing efficient arrangements of feedback links, called feedback topologies, under the IA constraint. For the multiple-input-multiple-output (MIMO) K-user interference channel, we propose the feedback topology that supports sequential CSI exchange (feedback and feedforward) between transmitters and receivers so as to achieve IA progressively. This feedback topology is shown to reduce the network feedback overhead from a cubic function of K to a linear one. To reduce the delay in the sequential CSI exchange, an alternative feedback topology is designed for supporting two-hop feedback via a control station, which also achieves the linear feedback scaling with K. Next, given the proposed feedback topologies, the feedback-bit allocation algorithm is designed for allocating feedback bits by each receiver to different feedback links so as to regulate the residual interference caused by the finite-rate feedback. Simulation results demonstrate that the proposed bit allocation leads to significant throughput gains especially in strong interference environments.
In this paper, we study the uplink of a cellular system using the linear deterministic approximation model, where there are two users transmitting to a receiver, mutually interfering with a third transmitter communicating with a second receiver. We give an achievable coding scheme and prove its optimality, i.e. characterize the capacity region. This scheme is a form of interference alignment which exploits the channel gain difference of the two-user cell.
We consider the problem of quantifying the Pareto optimal boundary in the achievable rate region over multiple-input single-output (MISO) interference channels, where the problem boils down to solving a sequence of convex feasibility problems after certain transformations. The feasibility problem is solved by two new distributed optimal beamforming algorithms, where the first one is to parallelize the computation based on the method of alternating projections, and the second one is to localize the computation based on the method of cyclic projections. Convergence proofs are established for both algorithms.
In this paper, we focus on the two-user Gaussian interference channel (GIC), and study the Han-Kobayashi (HK) coding/decoding strategy with the objective of designing low-density parity-check (LDPC) codes. A code optimization algorithm is proposed which adopts a random perturbation technique via tracking the average mutual information. The degree distribution optimization and convergence threshold computation are carried out for strong and weak interference channels, employing binary phase-shift keying (BPSK). Under strong interference, it is observed that optimized codes operate close to the capacity boundary. For the case of weak interference, it is shown that via the newly designed codes, a nontrivial rate pair is achievable, which is not attainable by single user codes with time-sharing. Performance of the designed LDPC codes are also studied for finite block lengths through simulations of specific codes picked from the optimized degree distributions.
Interference alignment (IA) has recently emerged as a promising interference mitigation technique for interference networks. In this letter, we focus on the IA non-iterative transceiver design problem in a multiple-input-multiple-output interfering broadcast channel (MIMO-IBC), and observed that there is previously unexploited flexibility in different permutations of user ordering. By choosing a good user ordering for a pre-determined IA inter-channel-interference allocation, an improved transceiver design can be accomplished. In order to achieve a more practical performance-complexity tradeoff, a suboptimal user ordering algorithm is proposed. Simulation shows the proposed suboptimal user ordering algorithm can achieve near-optimal performance compared to the optimal ordering while exhibiting only moderate computational complexity.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
