Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRigorous approach to the nonlinear saturation of the tearing mode in cylindrical and slab geometry
143
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The saturation of the tearing mode instability is described within the standard framework of reduced magnetohydrodynamics (RMHD) in the case of an $r$-dependent or of a uniform resistivity profile. Using the technique of matched asymptotic expansions, where the perturbation parameter is the island width $w$, the problem can be solved in two ways: with the so-called flux coordinate method, which is based on the fact that the current profile is a flux function, and with a new perturbative method that does not use this property. The latter is applicable to more general situations where an external forcing or a sheared velocity profile are involved. The calculation provides a new relationship between the saturated island width and the $Delta $ stability parameter that involves a $ln{w/w_{0}}$ term, where $w_{0}$ is a nonlinear scaling length that was missing in previous work. It also yields the modification of the equilibrium magnetic flux function.
rate research
Read More
The global ideal kink equation, for cylindrical geometry and zero beta, is simplified in the high poloidal mode number limit and used to determine the tearing stability parameter, $Delta^prime$. In the presence of a steep monotonic current gradient, $Delta^prime$ becomes a function of a parameter, $sigma_0$, characterising the ratio of the maximum current gradient to magnetic shear, and $x_s$, characterising the separation of the resonant surface from the maximum of the current gradient. In equilibria containing a current spike, so that there is a non-monotonic current profile, $Delta^prime$ also depends on two parameters: $kappa$, related to the ratio of the curvature of the current density at its maximum to the magnetic shear, and $x_s$, which now represents the separation of the resonance from the point of maximum current density. The relation of our results to earlier studies of tearing modes and to recent gyro-kinetic calculations of current driven instabilities, is discussed, together with potential implications for the stability of the tokamak pedestal.
The effects of line-tying on resistive tearing instability in slab geometry is studied within the framework of reduced magnetohydrodynamics (RMHD).citep{KadomtsevP1974,Strauss1976} It is found that line-tying has a stabilizing effect. The tearing mode is stabilized when the system length $L$ is shorter than a critical length $L_{c}$, which is independent of the resistivity $eta$. When $L$ is not too much longer than $L_{c}$, the growthrate $gamma$ is proportional to $eta$ . When $L$ is sufficiently long, the tearing mode scaling $gammasimeta^{3/5}$ is recovered. The transition from $gammasimeta$ to $gammasimeta^{3/5}$ occurs at a transition length $L_{t}simeta^{-2/5}$.
Gyrokinetic theory of nonlinear mode coupling as a mechanism for toroidal Alfven eigenmode (TAE) saturation in the fusion plasma related parameter regime is presented, including 1) para- metric decay of TAE into lower kinetic TAE (LKTAE) and geodesic acoustic mode (GAM), and 2) enhanced TAE coupling to shear Alfven wave (SAW) continuum via ion induced scattering. Our theory shows that, for TAE saturation in the parameter range of practical interest, several processes with comparable scattering cross sections can be equally important.
The capability to model the nonlinear magnetohydrodynamic (MHD) evolution of stellarator plasmas is developed by extending the M3D-$C^1$ code to allow non-axisymmetric domain geometry. We introduce a set of logical coordinates, in which the computational domain is axisymmetric, to utilize the existing finite-element framework of M3D-$C^1$. A $C^1$ coordinate mapping connects the logical domain to the non-axisymmetric physical domain, where we use the M3D-$C^1$ extended MHD models essentially without modifications. We present several numerical verifications on the implementation of this approach, including simulations of the heating, destabilization, and equilibration of stellarator plasmas with strongly anisotropic thermal conductivity, and of the relaxation of stellarator equilibria to integrable and non-integrable magnetic field configurations in realistic geometries.
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situations with finite plasma pressure that are stabilised by favourable average curvature in a simple resistive MHD model. We also demonstrate that the same code can also be used to calculate the basis-functions [C J Ham, et al, Plasma Phys. Control. Fusion 54 (2012) 105014] needed to construct Delta.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
