Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userStructural phase transitions in epitaxial perovskite films
95
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Three different film systems have been systematically investigated to understand the effects of strain and substrate constraint on the phase transitions of perovskite films. In SrTiO$_3$ films, the phase transition temperature T$_C$ was determined by monitoring the superlattice peaks associated with rotations of TiO$_6$ octahedra. It is found that T$_C$ depends on both SrTiO$_3$ film thickness and SrRuO$_3$ buffer layer thickness. However, lattice parameter measurements showed no sign of the phase transitions, indicating that the tetragonality of the SrTiO$_3$ unit cells was no longer a good order parameter. This signals a change in the nature of this phase transition, the internal degree of freedom is decoupled from the external degree of freedom. The phase transitions occur even without lattice relaxation through domain formation. In NdNiO$_3$ thin films, it is found that the in-plane lattice parameters were clamped by the substrate, while out-of-plane lattice constant varied to accommodate the volume change across the phase transition. This shows that substrate constraint is an important parameter for epitaxial film systems, and is responsible for the suppression of external structural change in SrTiO$_3$ and NdNiO$_3$ films. However, in SrRuO$_3$ films we observed domain formation at elevated temperature through x-ray reciprocal space mapping. This indicated that internal strain energy within films also played an important role, and may dominate in some film systems. The final strain states within epitaxial films were the result of competition between multiple mechanisms and may not be described by a single parameter.
rate research
Read More
We develop a phenomenological thermodynamic theory of ferroelectric BaTiO3 (BT) thin films epitaxially grown on cubic substrates using the Landau-Devonshire eight-order potential. The constructed misfit-temperature phase diagram is asymmetrical. We found that, overall view of the phase diagram depends on the values of compliances used in calculations and provide two qualitatively different diagrams. A thermodynamic path for BT film grown onto particular substrate can be found using a plot of the room-temperature tetragonal distortion (c-a)/a as a function of misfit strain.
Control of oxygen stoichiometry in complex oxides via topotactic phase transition is an interesting avenue to not only modifying the physical properties, but utilizing in many energy technologies, such as energy storage and catalysts. However, detailed structural evolution in the close proximity of the topotactic phase transition in multivalent oxides has not been much studied. In this work, we used strontium cobaltites (SrCoOx) epitaxially grown by pulsed laser epitaxy (PLE) as a model system to study the oxidation-driven evolution of the structure, electronic, and magnetic properties. We grew coherently strained SrCoO2.5 thin films and performed post-annealing at various temperatures for topotactic conversion into the perovskite phase (SrCoO3-{delta}). We clearly observed significant changes in electronic transport, magnetism, and microstructure near the critical temperature for the topotactic transformation from the brownmillerite to the perovskite phase. Nevertheless, the overall crystallinity was well maintained without much structural degradation, indicating that topotactic phase control can be a useful tool to control the physical properties repeatedly via redox reactions.
Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface the films are polycrystalline with a large number of extended defects suggesting the potential for further improvement in growth. X-Ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS3 films thus far. Our study opens up opportunities to realize epitaxial thin films, heterostructures, and superlattices of chalcogenide perovskites to probe fundamental physical phenomena and the resultant electronic and photonic device technologies.
Gen Shirane began studying ferroelectrics while he was still based in Japan in the early 1950s. It was therefore natural that when he arrived at Brookhaven and began specialising in neutron scattering that he would devote much of his energy and expertise studying structural phase transitions. We review the ground breaking experiments that showed the behaviour of antiferroelectrics and ferroelectrics were reasonably described in terms of the soft mode concept of structural phase transitions. This work lead directly to Gen being awarded the Buckley prize and, jointly with John Axe, awarded the Warren prize. We then describe his work on incommensurate phase transitions and in particular how the giant Kohn anomalies are responsible for the structural instabilities in one-dimensional metals. Finally Gen carefully investigated the central peak and the two-length scale phenomena that occur at most if not all transitions. Due to Gens elegant experimental work we know a great deal about both of these effects but in neither case is theory able to explain all of his results
We present the results of pressure-dependent far-infrared reflectivity measurements on the multiferroic perovskite BiFeO3 at room temperature. The observed behavior of the infrared-active phonon modes as a funtion of pressure clearly reveals two structural phase transitions around 3.0 and 7.5 GPa, supporting the results of recent Raman and x-ray diffraction studies under pressure. Based on the pressure-dependent frequency shifts of the infrared-active phonon modes we discuss the possible character of the phase transitions.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
