Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userGiant entropy change at the co-occurrence of structural and magnetic transitions in the Ni2.19Mn0.81Ga Heusler alloy
81
0
0.0
(
0
)
Authors
L. Pareti
Ask ChatGPT about the research
No Arabic abstract
In this paper we report the existence of a giant magnetocaloric effect (MCE) in a intermetallic compound non-containing rare-earth. This effect is associated with the concomitant occurrence of a structural and a magnetic transition. The result has been compared with that obtained in a parent compound in which magnetic and structural transition occur separately.
rate research
Read More
We report the structural, transport, electronic, and magnetic properties of Co$_2$FeGa Heusler alloy nanoparticles. The Rietveld refinements of x-ray diffraction (XRD) data with the space group Fm$bar {3}$m clearly demonstrates that the nanoparticles are of single phase. The particle size (D) decreases with increasing the SiO$_2$ concentration. The Bragg peak positions and the inter-planer spacing extracted from high-resolution transmission electron microscopy image and selected area electron diffraction are in well agreement with data obtained from XRD. The coercivity initially increases from 127~Oe to 208~Oe between D = 8.5~nm and 12.5~nm, following the D$^{-3/2}$ dependence and then decreases with further increasing D up to 21.5~nm with a D$^{-1}$ dependence, indicating the transition from single domain to multidomain regime. The effective magnetic anisotropic constant behaves similarly as coercivity, which confirms this transition. A complex scattering mechanisms have been fitted to explain the electronic transport properties of these nanoparticles. In addition we have studied core-level and valence band spectra using photoemission spectroscopy, which confirm the hybridization between $d$ states of Co/Fe. Further nanoparticle samples synthesized by co-precipitation method show higher saturation magnetization. The presence of Raman active modes can be associated with the high chemical ordering, which motivates for detailed temperature dependent structural investigation using synchrotron radiation and neutron sources.
The large magnetocaloric effect (MCE) observed in Ni-Mn based shape-memory Heusler alloys put them forward to use in magnetic refrigeration technology. It is associated with a first-order magnetostructural (martensitic) phase transition. We conducted a comprehensive study of the MCE for the off-stoichiometric Heusler alloy Ni$_{2.2}$Mn$_{0.8}$Ga in the vicinity of its first-order magnetostructural phase transition. We found a reversible MCE under repeated magnetic field cycles. The reversible behavior can be attributed to the small thermal hysteresis of the martensitic phase transition. Based on the analysis of our detailed temperature dependent X-ray diffraction data, we demonstrate the geometric compatibility of the cubic austenite and tetragonal martensite phases. This finding directly relates the reversible MCE behavior to an improved geometric compatibility condition between cubic austenite and tetragonal martensite phases. The approach will help to design shape-memory Heusler alloys with a large reversible MCE taking advantage of the first-order martensitic phase transition.
We report the deposition of thin Co$_2$FeSi films by RF magnetron sputtering. Epitaxial (100)-oriented and L2$_1$ ordered growth is observed for films grown on MgO(100) substrates. (110)-oriented films on Al$_2$O$_3$(110) show several epitaxial domains in the film plane. Investigation of the magnetic properties reveals a saturation magnetization of 5.0 $mu_B/f.u.$ at low temperatures. The temperature dependence of the resistivity $rho_{xx}(T)$ exhibits a crossover from a T^3.5 law at T<50K to a T^1.65 behaviour at elevated temperatures. $rho_{xx}(H)$ shows a small anisotropic magnetoresistive effect. A weak dependence of the normal Hall effect on the external magnetic field indicates the compensation of electron and hole like contributions at the Fermi surface.
High-entropy alloys (HEAs) are solid solutions of multiple elements with equal atomic ratios which present an innovative pathway for de novo alloy engineering. While there exist extensive studies to ascertain the important structural aspects governing their mechanical behaviors, elucidating the underlying deformation mechanisms still remains a challenge. Using atomistic simulations, we probe the particle rearrangements in a yielding, model HEA system to understand the structural origin of its plasticity. We find the plastic deformation is initiated by irreversible topological fluctuations which tend to spatially localize in regions termed as soft spots which consist of particles actively participating in slow vibrational motions, an observation strikingly reminiscent of nonlinear glassy rheology. Due to the varying local elastic moduli resulting from the loss of compositional periodicity, these plastic responses exhibit significant spatial heterogeneity and are found to be inversely correlated with the distribution of local electronegativity. Further mechanical loading promotes the cooperativity among these local plastic events and triggers the formation of dislocation loops. As in strained crystalline solids, different dislocation loops can further merge together and propagate as the main carrier of large-scale plastic deformation. However, the energy barriers located at the spatial regions with higher local electronegativity severely hinders the motion of dislocations. By delineating the transient mechanical response in terms of atomic configuration, our computational findings shed new light on understanding the nature of plasticity of single-phase HEA.
We demonstrate room-temperature stabilization of dipolar magnetic skyrmions with diameters in the range of $100$ nm in a single ultrathin layer of the Heusler alloy Co$_2$FeAl (CFA) under moderate magnetic fields. Current-induced skyrmion dynamics in microwires is studied with a scanning Nitrogen-Vacancy magnetometer operating in the photoluminescence quenching mode. We first demonstrate skyrmion nucleation by spin-orbit torque and show that its efficiency can be significantly improved using tilted magnetic fields, an effect which is not specific to Heusler alloys and could be advantageous for future skyrmion-based devices. We then show that current-induced skyrmion motion remains limited by strong pinning effects, even though CFA is a magnetic material with a low magnetic damping parameter.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
