Do you want to publish a course? Click here

Barrier-controlled carrier transport in microcrystalline semiconducting materials: Description within a unified model

342   0   0.0 ( 0 )
 Added by Dr. Uwe Wille
 Publication date 2002
  fields Physics
and research's language is English




Ask ChatGPT about the research

A recently developed model that unifies the ballistic and diffusive transport mechanisms is applied in a theoretical study of carrier transport across potential barriers at grain boundaries in microcrystalline semiconducting materials. In the unified model, the conductance depends on the detailed structure of the band edge profile and in a nonlinear way on the carrier mean free path. Equilibrium band edge profiles are calculated within the trapping model for samples made up of a linear chain of identical grains. Quantum corrections allowing for tunneling are included in the calculation of electron mobilities. The dependence of the mobilities on carrier mean free path, grain length, number of grains, and temperature is examined, and appreciable departures from the results of the thermionic-field-emission model are found. Specifically, the unified model is applied in an analysis of Hall mobility data for n-type microcrystalline Si thin films in the range of thermally activated transport. Owing mainly to the effect of tunneling, potential barrier heights derived from the data are substantially larger than the activation energies of the Hall mobilities. The specific features of the unified model, however, cannot be resolved within the rather large uncertainties of the analysis.



rate research

Read More

We found that the electronic transport property of SnSe single crystals was sensitive to oxygen content. Semiconducting SnSe single crystals were obtained by using Sn of grain form as a starting material while powder Sn resulted in metallic SnSe. X-ray photoelectron spectroscopy analysis revealed that the surfaces of raw Sn were oxidized, where the volume fraction was relatively low in grain Sn. This demonstrates that contamination of oxygen causes metallic behavior in grown SnSe single crystals.
Carbon nanotube field-effect transistors operate over a wide range of electron or hole density, controlled by the gate voltage. Here we calculate the mobility in semiconducting nanotubes as a function of carrier density and electric field, for different tube diameters and temperature. The low-field mobility is a non-monotonic function of carrier density, and varies by as much as a factor of 4 at room temperature. At low density, with increasing field the drift velocity reaches a maximum and then exhibits negative differential mobility, due to the non-parabolicity of the bandstructure. At a critical density $rho_csim$ 0.35-0.5 electrons/nm, the drift velocity saturates at around one third of the Fermi velocity. Above $rho_c$, the velocity increases with field strength with no apparent saturation.
Understanding metallic behaviour is still one of the central tasks in Condensed Matter Physics. Recent developments have energized the interest in several modern concepts, such as strange metal, bad metal, and Planckian metal. However, a unified description of metallic resistivity applicable to the existing diversity of materials is still missing. Herein we present an empirical analysis of a large variety of metals, from normal metals to strongly correlated metals, using the same phenomenological approach. The electrical resistivity in all the cases follows a parallel resistor formalism, which takes both T-linear and T-quadratic dependence of the scattering rates into account. The results reveal the significance of the model by showing that the different metallic classes are determined by the relative magnitude of these two components. Importantly, our analysis shows that the T-linear term arises from the Planckian dissipation limit and it is present in all considered systems. This formalism extends previous reports on strange and normal metals, facilitating the classification of materials with non-linear resistivity curves, an important step towards the experimental confirmation of the universal character of the Planckian dissipation bound.
Atomically thin transition metal dichalcogenide (TMD) semiconductors hold enormous potential for modern optoelectronic devices and quantum computing applications. By inducing long-range ferromagnetism (FM) in these semiconductors through the introduction of small amounts of a magnetic dopant, it is possible to extend their potential in emerging spintronic applications. Here, we demonstrate light-mediated, room temperature (RT) FM, in V-doped WS2 (V-WS2) monolayers. We probe this effect using the principle of magnetic LC resonance, which employs a soft ferromagnetic Co-based microwire coil driven near its resonance in the radio frequency (RF) regime. The combination of LC resonance with an extraordinary giant magneto-impedance effect, renders the coil highly sensitive to changes in the magnetic flux through its core. We then place the V-WS2 monolayer at the core of the coil where it is excited with a laser while its change in magnetic permeability is measured. Notably, the magnetic permeability of the monolayer is found to depend on the laser intensity, thus confirming light control of RT magnetism in this two-dimensional (2D) material. Guided by density functional calculations, we attribute this phenomenon to the presence of excess holes in the conduction and valence bands, as well as carriers trapped in the magnetic doping states, which in turn mediates the magnetization of the V-WS2 monolayer. These findings provide a unique route to exploit light-controlled ferromagnetism in low powered 2D spintronic devices capable of operating at RT.
Charge transport in amorphous oxide semiconductors is often described as the band transport affected by disorder in the form of random potential barriers (RB). Theoretical studies in the framework of this approach neglected so far the percolation nature of the phenomenon. In this article, a recipe for theoretical description of charge transport in the RB model is formulated using percolation arguments. Comparison with the results published so far evidences the superiority of the percolation approach.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا