Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInternal Friction Measures to Study Precipitates Formation in EP and N-Doped Bulk Nb for SRF Applications
351
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Main focus of this study is the investigation of thermodynamics phenomena responsible for the High Field Q Slope (HFQS) in SRF cavities by Internal Friction (IF) measurement. Mechanical spectroscopy is, indeed, a well-established technique to study precipitate formations in BCC materials and several works on the effects of impurities as N and O on the Snoek peak have been published so far and will be taken as reference to explain the mechanisms behind the observed dissipation effects. Internal Friction measurements were performed in Belgium at IMCE on Nb rectangular shape samples with different RRR values prepared at Fermilab by using Electro Polishing (EP), N-doping and heat treatments in order to reproduce the same conditions during the standard treatments applied on bulk Nb SRF cavities. From IF spectra, the H trapping mechanism by interstitial atoms (N and O and/or vacancies, depending on the purity level, RRR) can be easily recognized leading to results that perfectly corroborate previous findings on Q-disease, HFQS and RRR phenomena.
rate research
Read More
We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to reveal the existence of the niobium hydride precipitates directly in the Rigetti chip areas. Electron diffraction and high-resolution transmission electron microscopy (HR-TEM) analyses are performed at room and cryogenic temperatures (~106 K) on superconducting qubit niobium film areas, and reveal the formation of three types of Nb hydride domains with different crystalline orientations and atomic structures. There is also variation in their size and morphology from small (~5 nm) irregular shape domains within the Nb grains to large (~10-100 nm) Nb grains fully converted to niobium hydride. As niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperatures, our findings highlight a new previously unknown source of decoherence in superconducting qubits, contributing to both quasiparticle and two-level system (TLS) losses, and offering a potential explanation for qubit performance changes upon cooldowns. A pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications is also discussed.
Computing inspired by the human brain requires a massive parallel architecture of low-power consuming elements of which the internal state can be changed. SrTiO3 is a complex oxide that offers rich electronic properties; here Schottky contacts on Nb-doped SrTiO3 are demonstrated as memristive elements for neuromorphic computing. The electric field at the Schottky interface alters the conductivity of these devices in an analog fashion, which is important for mimicking synaptic plasticity. Promising power consumption and endurance characteristics are observed. The resistance states are shown to emulate the forgetting process of the brain. A charge trapping model is proposed to explain the switching behavior.
High purity niobium (Nb), subjected to the processing methods used in the fabrication of superconducting RF cavities, displays micron-sized surface patches containing excess carbon. High-resolution transmission electron microscopy and electron energy-loss spectroscopy measurements are presented which reveal the presence of nanoscale NbC coherent precipitates in such regions. Raman backscatter spectroscopy on similar surface regions exhibit spectra consistent with the literature results on bulk NbC but with significantly enhanced two-phonon scattering. The unprecedented strength and sharpness of the two-phonon signal has prompted a theoretical analysis, using density functional theory (DFT), of phonon modes in NbC for two different interface models of the coherent precipitate. One model leads to overall compressive strain and a comparison to ab-initio calculations of phonon dispersion curves under uniform compression of the NbC shows that the measured two-phonon peaks are linked directly to phonon anomalies arising from strong electron-phonon interaction. Another model of the extended interface between Nb and NbC, studied by DFT, gives insight into the frequency shifts of the acoustic and optical mode density of states measured by first order Raman. The exact origin of the stronger two-phonon response is not known at present but it suggests the possibility of enhanced electron-phonon coupling in transition metal carbides under strain found either in the bulk NbC inclusions or at their interfaces with Nb metal. Preliminary tunneling studies using a point contact method show some energy gaps larger than expected for bulk NbC.
We report an investigation of the structural and electronic properties of hybrid superconductor/ferromagnet (S/F) bilayers of composition Nb/Cu$_{60}$Ni$_{40}$ prepared by magnetron sputtering. X-ray and neutron reflectometry show that both the overall interfacial roughness and vertical correlations of the roughness of different interfaces are lower for heterostructures deposited on Al$_2$O$_3$(1$bar{1}$02) substrates than for those deposited on Si(111). Mutual inductance experiments were then used to study the influence of the interfacial roughness on the superconducting transition temperature, $T_C$. These measurements revealed a $sim$ 4% higher $T_C$ in heterostructures deposited on Al$_2$O$_3$, compared to those on Si. We attribute this effect to a higher mean-free path of electrons in the S layer, caused by a suppression of diffusive scattering at the interfaces. However, the dependence of the $T_C$ on the thickness of the ferromagnetic layer is not significantly different in the two systems, indicating a weak influence of the interfacial roughness on the transparency for Cooper pairs.
This work reports the strain effect on the electrical properties of highly doped n-type single crystalline cubic silicon carbide (3C-SiC) transferred onto a 6-inch glass substrate employing an anodic bonding technique. The experimental data shows high gauge factors of -8.6 in longitudinal direction and 10.5 in transverse direction along the [100] orientation. The piezoresistive effect in the highly doped 3C-SiC film also exhibits an excellent linearity and consistent reproducibility after several bending cycles. The experimental result was in good agreement with the theoretical analysis based on the phenomenon of electron transfer between many valleys in the conduction band of n-type 3C-SiC. Our finding for the large gauge factor in n-type 3C- SiC coupled with the elimination of the current leak to the insulated substrate could pave the way for the development of single crystal SiC-on-glass based MEMS applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
