Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe throughput calibration of the VERITAS telescopes
50
0
0.0
(
0
)
Added by
Mireia Nievas Rosillo
Publication date
2021
fields
Physics
and research's language is
English
Authors
M. Nievas Rosillo
Ask ChatGPT about the research
No Arabic abstract
Imaging atmospheric Cherenkov telescopes are continuously exposed to varying weather conditions that have short and long-term effects on their response to Cherenkov light from extensive air showers. This work presents the implementation of a throughput calibration method for the VERITAS telescopes taking into account changes in the optical response and detector performance over time. Different methods to measure the total throughput of the instrument, which depend on mirror reflectivites and PMT camera gain and efficiency, are discussed as well as the effect of its evolution on energy thresholds, effective collection areas, and energy reconstruction. The application of this calibration in the VERITAS data analysis chain is discussed, including the validation using Monte Carlo simulations and observations of the Crab Nebula.
rate research
Read More
High angular resolution observations at optical wavelengths provide valuable insights in stellar astrophysics, directly measuring fundamental stellar parameters, and probing stellar atmospheres, circumstellar disks, elongation of rapidly rotating stars, and pulsations of Cepheid variable stars. The angular size of most stars are of order one milli-arcsecond or less, and to spatially resolve stellar disks and features at this scale requires an optical interferometer using an array of telescopes with baselines on the order of hundreds of meters. We report on the successful implementation of a stellar intensity interferometry system developed for the four VERITAS imaging atmospheric-Cherenkov telescopes. The system was used to measure the angular diameter of the two sub-mas stars $beta$ Canis Majoris and $epsilon$ Orionis with a precision better than 5%. The system utilizes an off-line approach where starlight intensity fluctuations recorded at each telescope are correlated post-observation. The technique can be readily scaled onto tens to hundreds of telescopes, providing a capability that has proven technically challenging to current generation optical amplitude interferometry observatories. This work demonstrates the feasibility of performing astrophysical measurements with imaging atmospheric-Cherenkov telescope arrays as intensity interferometers and the promise for integrating an intensity interferometry system within future observatories such as the Cherenkov Telescope Array.
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
In radio astronomy, holography is a commonly used technique to create an image of the electric field distribution in the aperture of a dish antenna. The image is used to detect imperfections in the reflector surface. Similarly, holography can be applied to phased array telescopes, in order to measure the complex gains of the receive paths of individual antennas. In this paper, a holographic technique is suggested to calibrate the digital beamformer of a phased array telescope. The effectiveness of the technique was demonstrated by applying it on data from the Engineering Development Array 2, one of the prototype stations of the low frequency component of the Square Kilometre Array. The calibration method is very quick and requires few resources. In contrast to holography for dish antennas, it works without a reference antenna. We demonstrate the utility of this technique for initial station commissioning and verification as well as for routine station calibration.
This paper is concerned with algorithms for calibration of direction dependent effects (DDE) in aperture synthesis radio telescopes (ASRT). After correction of Direction Independent Effects (DIE) using self-calibration, imaging performance can be limited by the imprecise knowledge of the forward gain of the elements in the array. In general, the forward gain pattern is directionally dependent and varies with time due to a number of reasons. Some factors, such as rotation of the primary beam with Parallactic Angle for Azimuth-Elevation mount antennas are known a priori. Some, such as antenna pointing errors and structural deformation/projection effects for aperture-array elements cannot be measured {em a priori}. Thus, in addition to algorithms to correct for DD effects known a priori, algorithms to solve for DD gains are required for high dynamic range imaging. Here, we discuss a mathematical framework for antenna-based DDE calibration algorithms and show that this framework leads to computationally efficient optimal algorithms which scale well in a parallel computing environment. As an example of an antenna-based DD calibration algorithm, we demonstrate the Pointing SelfCal algorithm to solve for the antenna pointing errors. Our analysis show that the sensitivity of modern ASRT is sufficient to solve for antenna pointing errors and other DD effects. We also discuss the use of the Pointing SelfCal algorithm in real-time calibration systems and extensions for antenna Shape SelfCal algorithm for real-time tracking and corrections for pointing offsets and changes in antenna shape.
The Cherenkov Telescope Array (CTA) will be the next generation gamma-ray observatory, which will consist of three kinds of telescopes of different sizes. Among those, the Large Size Telescope (LST) will be the most sensitive in the low energy range starting from 20 GeV. The prototype LST (LST-1) proposed for CTA was inaugurated in October 2018 in the northern hemisphere site, La Palma (Spain), and is currently in its commissioning phase. MAGIC is a system of two gamma-ray Cherenkov telescopes of the current generation, located approximately 100 m away from LST-1, that have been operating in stereoscopic mode since 2009. Since LST-1 and MAGIC can observe the same air shower events, we can compare the brightness of showers, estimated energies of gamma rays, and other parameters event by event, which can be used to cross-calibrate the telescopes. Ultimately, by performing combined analyses of the events triggering the three telescopes, we can reconstruct the shower geometry more accurately, leading to better energy and angular resolutions, and a better discrimination of the background showers initiated by cosmic rays. For that purpose, as part of the commissioning of LST-1, we performed joint observations of established gamma-ray sources with LST-1 and MAGIC. Also, we have developed Monte Carlo simulations for such joint observations and an analysis pipeline which finds event coincidence in the offline analysis based on their timestamps. In this work, we present the first detection of an astronomical source, the Crab Nebula, with combined observation of LST-1 and MAGIC. Moreover, we show results of the inter-telescope cross-calibration obtained using Crab Nebula data taken during joint observations with LST-1 and MAGIC.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
