Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userIntegrated Random Projection and Dimensionality Reduction by Propagating Light in Photonic Lattices
384
0
0.0
(
0
)
Authors
Mohammad-Ali Miri
Ask ChatGPT about the research
No Arabic abstract
It is proposed that the propagation of light in disordered photonic lattices can be harnessed as a random projection that preserves distances between a set of projected vectors. This mapping is enabled by the complex evolution matrix of a photonic lattice with diagonal disorder, which turns out to be a random complex Gaussian matrix. Thus, by collecting the output light from a subset of the waveguide channels, one can perform an embedding from a higher-dimension to a lower-dimension space that respects the Johnson-Lindenstrauss lemma and nearly preserves the Euclidean distances. It is discussed that distance-preserving random projection through photonic lattices requires intermediate disorder levels that allow diffusive spreading of light from a single channel excitation, as opposed to strong disorder which initiates the localization regime. The proposed scheme can be utilized as a simple and powerful integrated dimension reduction stage that can greatly reduce the burden of a subsequent neural computing stage.
rate research
Read More
With the proliferation of ultra-high-speed mobile networks and internet-connected devices, along with the rise of artificial intelligence, the world is generating exponentially increasing amounts of data - data that needs to be processed in a fast, efficient and smart way. These developments are pushing the limits of existing computing paradigms, and highly parallelized, fast and scalable hardware concepts are becoming progressively more important. Here, we demonstrate a computational specific integrated photonic tensor core - the optical analog of an ASIC-capable of operating at Tera-Multiply-Accumulate per second (TMAC/s) speeds. The photonic core achieves parallelized photonic in-memory computing using phase-change memory arrays and photonic chip-based optical frequency combs (soliton microcombs). The computation is reduced to measuring the optical transmission of reconfigurable and non-resonant passive components and can operate at a bandwidth exceeding 14 GHz, limited only by the speed of the modulators and photodetectors. Given recent advances in hybrid integration of soliton microcombs at microwave line rates, ultra-low loss silicon nitride waveguides, and high speed on-chip detectors and modulators, our approach provides a path towards full CMOS wafer-scale integration of the photonic tensor core. While we focus on convolution processing, more generally our results indicate the major potential of integrated photonics for parallel, fast, and efficient computational hardware in demanding AI applications such as autonomous driving, live video processing, and next generation cloud computing services.
Narrow linewidth visible light lasers are critical for atomic, molecular and optical (AMO) applications including atomic clocks, quantum computing, atomic and molecular spectroscopy, and sensing. Historically, such lasers are implemented at the tabletop scale, using semiconductor lasers stabilized to large optical reference cavities. Photonic integration of high spectral-purity visible light sources will enable experiments to increase in complexity and scale. Stimulated Brillouin scattering (SBS) is a promising approach to realize highly coherent on-chip visible light laser emission. While progress has been made on integrated SBS lasers at telecommunications wavelengths, barriers have existed to translate this performance to the visible, namely the realization of Brillouin-active waveguides in ultra-low optical loss photonics. We have overcome this barrier, demonstrating the first visible light photonic integrated SBS laser, which operates at 674 nm to address the 88Sr+ optical clock transition. To guide the laser design, we use a combination of multi-physics simulation and Brillouin spectroscopy in a 2 meter spiral waveguide to identify the 25.110 GHz first order Stokes frequency shift and 290 MHz gain bandwidth. The laser is implemented in an 8.9 mm radius silicon nitride all-waveguide resonator with 1.09 dB per meter loss and Q of 55.4 Million. Lasing is demonstrated, with an on-chip 14.7 mW threshold, a 45% slope efficiency, and linewidth narrowing as the pump is increased from below threshold to 269 Hz. To illustrate the wavelength flexibility of this design, we also demonstrate lasing at 698 nm, the wavelength for the optical clock transition in neutral strontium. This demonstration of a waveguide-based, photonic integrated SBS laser that operates in the visible, and the reduced size and sensitivity to environmental disturbances, shows promise for diverse AMO applications.
Moire lattices consist of two identical periodic structures overlaid with a relative rotation angle. Present even in everyday life, moire lattices have been also produced, e.g., with coupled graphene-hexagonal boron nitride monolayers, graphene-graphene layers, and layers on a silicon carbide surface.A fundamental question that remains unexplored is the evolution of waves in the potentials defined by the moire lattices. Here we experimentally create two-dimensional photonic moire lattices, which, unlike their material predecessors, have readily controllable parameters and symmetry allowing to explore transitions between structures with fundamentally different geometries: periodic, general aperiodic and quasi-crystal ones. Equipped with such realization, we observe localization of light in deterministic linear lattices. Such localization is based on at band physics, in contrast to previous schemes based on light difusion in optical quasicrystals,where disorder is required for the onset of Anderson localization. Using commensurable and incommensurable moire patterns, we report the first experimental demonstration of two-dimensional localization-delocalization-transition (LDT) of light. Moire lattices may feature almost arbitrary geometry that is consistent with the crystallographic symmetry groups of the sublattices, and therefore afford a powerful tool to control the properties of light patterns, to explore the physics of transitions between periodic and aperiodic phases, and two-dimensional wavepacket phenomena relevant to several areas of science.
We study the focusing of light through random photonic materials using wavefront shaping. We explore a novel approach namely binary amplitude modulation. To this end, the light incident to a random photonic medium is spatially divided into a number of segments. We identify the segments that give rise to fields that are out of phase with the total field at the intended focus and assign these a zero amplitude, whereas the remaining segments maintain their original amplitude. Using 812 independently controlled segments of light, we find the intensity at the target to be 75 +/- 6 times enhanced over the average intensity behind the sample. We experimentally demonstrate focusing of light through random photonic media using both an amplitude only mode liquid crystal spatial light modulator and a MEMS-based spatial light modulator. Our use of Micro Electro-Mechanical System (MEMS)-based digital micromirror devices for the control of the incident light field opens an avenue to high speed implementations of wavefront shaping.
Our understanding of topological insulators is based on an underlying crystalline lattice where the local electronic degrees of freedom at different sites hybridize with each other in ways that produce nontrivial band topology, and the search for material systems to realize such phases have been strongly influenced by this. Here we theoretically demonstrate topological insulators in systems with a random distribution of sites in space, i. e., a random lattice. This is achieved by constructing hopping models on random lattices whose ground states possess nontrivial topological nature (characterized e. g., by Bott indices) that manifests as quantized conductances in systems with a boundary. By tuning parameters such as the density of sites (for a given range of fermion hopping), we can achieve transitions from trivial to topological phases. We discuss interesting features of these transitions. In two spatial dimensions, we show this for all five symmetry classes (A, AII, D, DIII and C) that are known to host nontrivial topology in crystalline systems. We expect similar physics to be realizable in any dimension and provide an explicit example of a $Z_2$ topological insulator on a random lattice in three spatial dimensions. Our study not only provides a deeper understanding of the topological phases of non-interacting fermions, but also suggests new directions in the pursuit of the laboratory realization of topological quantum matter.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
