Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAge of Information in Physical-Layer Network Coding Enabled Two-Way Relay Networks
111
0
0.0
(
0
)
Added by
Haoyuan Pan
Publication date
2021
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper investigates the information freshness of two-way relay networks (TWRN) operated with physical-layer network coding (PNC). Information freshness is quantified by age of information (AoI), defined as the time elapsed since the generation time of the latest received information update. PNC reduces communication latency of TWRNs by turning superimposed electromagnetic waves into network-coded messages so that end users can send update packets to each other via the relay more frequently. Although sending update packets more frequently is potential to reduce AoI, how to deal with packet corruption has not been well investigated. Specifically, if old packets are corrupted in any hop of a TWRN, one needs to decide the old packets to be dropped or to be retransmitted, e.g., new packets have recent information, but may require more time to be delivered. We study the average AoI with and without ARQ in PNC-enabled TWRNs. We first consider a non-ARQ scheme where old packets are always dropped when corrupted, referred to once-lost-then-drop (OLTD), and a classical ARQ scheme with no packet lost, referred to as reliable packet transmission (RPT). Interestingly, our analysis shows that neither the non-ARQ scheme nor the pure ARQ scheme achieves good average AoI. We then put forth an uplink-lost-then-drop (ULTD) protocol that combines packet drop and ARQ. Experiments on software-defined radio indicate that ULTD significantly outperforms OLTD and RPT in terms of average AoI. Although this paper focuses on TWRNs, we believe the insight of ULTD applies generally to other two-hop networks. Our insight is that to achieve high information freshness, when packets are corrupted in the first hop, new packets should be generated and sent (i.e., old packets are discarded); when packets are corrupted in the second hop, old packets should be retransmitted until successful reception.
rate research
Read More
The growing demand for high-speed data, quality of service (QoS) assurance and energy efficiency has triggered the evolution of 4G LTE-A networks to 5G and beyond. Interference is still a major performance bottleneck. This paper studies the application of physical-layer network coding (PNC), a technique that exploits interference, in heterogeneous cellular networks. In particular, we propose a rate-maximising relay selection algorithm for a single cell with multiple relays based on the decode-and-forward strategy. With nodes transmitting at different powers, the proposed algorithm adapts the resource allocation according to the differing link rates and we prove theoretically that the optimisation problem is log-concave. The proposed technique is shown to perform significantly better than the widely studied selection-cooperation technique. We then undertake an experimental study on a software radio platform of the decoding performance of PNC with unbalanced SNRs in the multiple-access transmissions. This problem is inherent in cellular networks and it is shown that with channel coding and decoders based on multiuser detection and successive interference cancellation, the performance is better with power imbalance. This paper paves the way for further research in multi-cell PNC, resource allocation, and the implementation of PNC with higher-order modulations and advanced coding techniques.
This paper investigates the application of physical-layer network coding (PNC) to Industrial Internet-of-Things (IIoT) where a controller and a robot are out of each others transmission range, and they exchange messages with the assistance of a relay. We particularly focus on a scenario where the controller has more transmitted information, and the channel of the controller is stronger than that of the robot. To reduce the communication latency, we propose an asymmetric transmission scheme where the controller and robot transmit different amount of information in the uplink of PNC simultaneously. To achieve this, the controller chooses a higher order modulation. In addition, the both users apply channel codes to guarantee the reliability. A problem is a superimposed symbol at the relay contains different amount of source information from the two end users. It is thus hard for the relay to deduce meaningful network-coded messages by applying the current PNC decoding techniques which require the end users to transmit the same amount of information. To solve this problem, we propose a lattice-based scheme where the two users encode-and-modulate their information in lattices with different lattice construction levels. Our design is versatile on that the two end users can freely choose their modulation orders based on their channel power, and the design is applicable for arbitrary channel codes.
Timeliness is an emerging requirement for many Internet of Things (IoT) applications. In IoT networks, where a large-number of nodes are distributed, severe interference may incur during the transmission phase which causes age of information (AoI) degradation. It is therefore important to study the performance limit of AoI as well as how to achieve such limit. In this paper, we aim to optimize the AoI in random access Poisson networks. By taking into account the spatio-temporal interactions amongst the transmitters, an expression of the peak AoI is derived, based on explicit expressions of the optimal peak AoI and the corresponding optimal system parameters including the packet arrival rate and the channel access probability are further derived. It is shown that with a given packet arrival rate (resp. a given channel access probability), the optimal channel access probability (resp. the optimal packet arrival rate), is equal to one under a small node deployment density, and decrease monotonically as the spatial deployment density increases due to the severe interference caused by spatio-temproal coupling between transmitters. When joint tuning of the packet arrival rate and channel access probability is performed, the optimal channel access probability is always set to be one. Moreover, with the sole tuning of the channel access probability, it is found that the optimal peak AoI performance can be improved with a smaller packet arrival rate only when the node deployment density is high, which is contrast to the case of the sole tuning of the packet arrival rate, where a higher channel access probability always leads to better optimal peak AoI regardless of the node deployment density. In all the cases of optimal tuning of system parameters, the optimal peak AoI linearly grows with the node deployment density as opposed to an exponential growth with fixed system parameters.
Physical-layer Network Coding (PNC) can significantly improve the throughput of wireless two way relay channel (TWRC) by allowing the two end nodes to transmit messages to the relay simultaneously. To achieve reliable communication, channel coding could be applied on top of PNC. This paper investigates link-by-link channel-coded PNC, in which a critical process at the relay is to transform the superimposed channel-coded packets received from the two end nodes plus noise, Y3=X1+X2+W3, to the network-coded combination of the source packets, S1 XOR S2 . This is in distinct to the traditional multiple-access problem, in which the goal is to obtain S1 and S2 separately. The transformation from Y3 to (S1 XOR S2) is referred to as the Channel-decoding-Network-Coding process (CNC) in that it involves both channel decoding and network coding operations. A contribution of this paper is the insight that in designing CNC, we should first (i) channel-decode Y3 to the superimposed source symbols S1+S2 before (ii) transforming S1+S2 to the network-coded packets (S1 XOR S2) . Compared with previously proposed strategies for CNC, this strategy reduces the channel-coding network-coding mismatch. It is not obvious, however, that an efficient decoder for step (i) exists. A second contribution of this paper is to provide an explicit construction of such a decoder based on the use of the Repeat Accumulate (RA) code. Specifically, we redesign the belief propagation algorithm of the RA code for traditional point-to-point channel to suit the need of the PNC multiple-access channel. Simulation results show that our new scheme outperforms the previously proposed schemes significantly in terms of BER without added complexity.
In this paper, we adopt the fluid limits to analyze Age of Information (AoI) in a wireless multiaccess network with many users. We consider the case wherein users have heterogeneous i.i.d. channel conditions and the statuses are generate-at-will. Convergence of the AoI occupancy measure to the fluid limit, represented by a Partial Derivative Equation (PDE), is proved within an approximation error inversely proportional to the number of users. Global convergence to the equilibrium of the PDE, i.e., stationary AoI distribution, is also proved. Based on this framework, it is shown that an existing AoI lower bound in the literature is in fact asymptotically tight, and a simple threshold policy, with the thresholds explicitly derived, achieves the optimum asymptotically. The proposed threshold-based policy is also much easier to decentralize than the widely-known index-based policies which require comparing user indices. To showcase the usability of the framework, we also use it to analyze the average non-linear AoI functions (with power and logarithm forms) in wireless networks. Again, explicit optimal threshold-based policies are derived, and average age functions proven. Simulation results show that even when the number of users is limited, e.g., $10$, the proposed policy and analysis are still effective.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
