Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userViscosity, shock-induced separation, and shock reversal -- Oscillating wing section in transonic flow
94
0
0.0
(
0
)
Added by
Kartik Venkatraman Prof.
Publication date
2021
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We numerically examine the mechanisms that describe the shock-boundary layer interactions in transonic flow past an oscillating wing section. At moderate and high angles of incidence but low amplitudes of oscillation, shock induced flow separation or shock-stall is observed accompanied by shock reversal. Even though the power input to the airfoil by the viscous forces is three orders of magnitude lower than that due to the pressure forces on the airfoil, the boundary layer manipulates the shock location and shock motion and redistributes the power input to the airfoil by the pressure forces. The shock motion is reversed relative to that in an inviscid flow as the boundary layer cannot sustain an adverse pressure gradient posed by the shock, causing the shock to move upstream leading to an early separation. The shock motion shows a phase difference with reference to the airfoil motion and is a function of the frequency of the oscillation. At low angles of incidence, and low amplitudes of oscillation, the boundary layer changes the profile presented to the external flow, leads to a slower expansion of the flow resulting in an early shock, and a diffused shock-foot caused by the boundary layer.
rate research
Read More
A delayed detached eddy simulation (DDES) of an overexpanded nozzle flow with shock-induced separation is carried out at a Reynolds number equal to 1.7 10^7. The flow unsteadiness, characterised by self-sustained shock oscillations, induces local unsteady loads on the nozzle wall as well as global off-axis forces. A clear physical understanding of the driving factors of the unsteadiness is still lacking. Under the current conditions, the nozzle operates in a highly-overexpanded regime and comprises a conical separation shock within the nozzle contour, merging into a Mach disk in the nozzle centre. Our current study focuses on the unsteady pressure signature on the nozzle wall, through the use of Fourier-based spectral analysis performed in time and in the azimuthal wavenumber space. The numerical data well agrees with the experimental measurements in terms of mean and fluctuating wall pressure statistics. The frequency spectra are characterised by the presence of a large bump in the low frequency range associated to a breathing motion of the shock system and a broad and high amplitude peak at high frequencies generated by the turbulent activity of the detached shear layer. Moreover, a distinct peak at an intermediate frequency (of the order 1000 Hz) is observed to persist in the wall-pressure spectra along the nozzle wall. The analysis of the pressure signals in the azimuthal wavenumber space indicates that this peak is clearly associated to the first (non-symmetrical) pressure mode and it is thus connected to the generation of side loads. Furthermore, it is found that the unsteady Mach disk is characterised by an intense vortex shedding activity and the interaction of these vortices with the second shock cell is a key factor in the sustainment of an aeroacoustic feedback loop within the nozzle.
We report an experimental observation of an instability in gas of constant density (air) with an initial non-uniform seeding of small droplets that develops as a planar shock wave passes through the gas-droplet mix. The seeding non-uniformity is produced by vertical injection of a slow-moving jet of air pre-mixed with glycol droplets into the test section of a shock tube, with the plane of the shock parallel to the axis of the jet. After the shock passage, we observe development of two counter-rotating vortices in the plane normal to that axis. The physical mechanism of the instability we observe is peculiar to multiphase flow, where the shock acceleration causes the second (embedded) phase to move with respect to the embedding medium. With sufficient seeding concentration, this leads to entrainment of the embedding phase that acquires a relative velocity dependent on the initial seeding, resulting in vortex formation in the flow.
The dynamics of spherical laser-induced cavitation bubbles in water is investigated by plasma photography, time-resolved shadowgraphs, and single-shot probe beam scattering enabling to portray the transition from initial nonlinear to late linear oscillations. The frequency of late oscillations yields the bubbles gas content. Simulations with the Gilmore model using plasma size as input and oscillation times as fit parameter provide insights into experimentally not accessible bubble parameters and shock wave emission. The model is extended by a term covering the initial shock-driven acceleration of the bubble wall, an automated method determining shock front position and pressure decay, and an energy balance for the partitioning of absorbed laser energy into vaporization, bubble and shock wave energy, and dissipation through viscosity and condensation. These tools are used for analysing a scattering signal covering 102 oscillation cycles. The bubble was produced by a plasma with 1550 K average temperature and had 36 $mu$m maximum radius. Predicted bubble wall velocities during expansion agree well with experimental data. Upon first collapse, most energy was stored in the compressed liquid around the bubble and then radiated away acoustically. The collapsed bubble contained more vapour than gas, and its pressure was 13.5 GPa. The pressure of the rebound shock wave initially decayed $propto r^{-1.8}$, and energy dissipation at the shock front heated liquid near the bubble wall above the superheat limit. The shock-induced temperature rise reduces damping during late bubble oscillations. Bubble dynamics changes significantly for small bubbles with less than 10 $mu$m radius.
How to determine accurately and efficiently the aerodynamic forces of the aircraft in high-speed flow is one of great challenges in modern aerodynamics. In this Letter we propose a new similarity law for steady transonic-supersonic flow over thin bodies. The new similarity law is based on the local Mach number frozen principle. It depends on both the specific heat ratio and the free-stream Mach number. The new similarity law enables one to determine the lift and drag coefficients of the aircraft from that of a reference state which is more reachable. The validity of the new similarity law has been confirmed by the excellent agreement with numerical simulations of both two-dimensional airfoil flows and three-dimensional wing flows.
The transition of the vortex pattern and the lift generated by a heaving wing in a uniform flow was investigated numerically. Motivated by insects flight maneuverability, we studied the relationship between a temporal change in the heaving wing motion and the change in the global vortex pattern. At a Strouhal number that generates an asymmetric vortex pattern, we found that temporal angular frequency reduction causes inversion of both the global vortex pattern and the lift sign. The inversion is initiated by the transfer of the leading-edge vortex, which interferes with the vortex pattern generated at the trailing edge. Successful inversion is conditioned on the starting phase and the time interval of the frequency reduction. The details of the process during the transition are discussed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
