Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTrajectory Design in Rechargeable UAV Aided Wireless Networks: A Unified Framework for Energy Efficiency and Flight Time Minimization
134
0
0.0
(
0
)
Added by
Yuan Liao
Publication date
2021
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper studies a rechargeable unmanned aerial vehicle (UAV) assisted wireless network, where a UAV is dispatched to disseminate information to a group of ground terminals (GTs) and returns to a recharging station (RS) before the on-board battery is depleted. The central aim is to design a UAV trajectory with the minimum total time duration, including the flight and recharging time, by optimizing the flying velocity, transmit power and hovering positions jointly. A flow-based mathematical programming formulation is proposed to provide optimal for joint optimization of flying and recharging time. Furthermore, to attack the curse of dimensionality for optimal decision making, a two-step method is proposed. In the first step, the UAV hovering positions is fixed and initialize a feasible trajectory design by solving a travelling salesman problem with energy constraints (TSPE) problem. In the second step, for the given initial trajectory, the time consumption for each sub-tour is minimized by optimizing the flying velocity, transmit power and hovering positions jointly. Numerical results show that the proposed method outperforms state of art techniques and reduces the aggregate time duration in an efficient way.
rate research
Read More
In this paper, we consider a scenario where an unmanned aerial vehicle (UAV) collects data from a set of sensors on a straight line. The UAV can either cruise or hover while communicating with the sensors. The objective is to minimize the UAVs total flight time from a starting point to a destination while allowing each sensor to successfully upload a certain amount of data using a given amount of energy. The whole trajectory is divided into non-overlapping data collection intervals, in each of which one sensor is served by the UAV. The data collection intervals, the UAVs speed and the sensors transmit powers are jointly optimized. The formulated flight time minimization problem is difficult to solve. We first show that when only one sensor is present, the sensors transmit power follows a water-filling policy and the UAVs speed can be found efficiently by bisection search. Then, we show that for the general case with multiple sensors, the flight time minimization problem can be equivalently reformulated as a dynamic programming (DP) problem. The subproblem involved in each stage of the DP reduces to handle the case with only one sensor node. Numerical results present insightful behaviors of the UAV and the sensors. Specifically, it is observed that the UAVs optimal speed is proportional to the given energy of the sensors and the inter-sensor distance, but inversely proportional to the data upload requirement.
Unmanned aerial vehicles (UAVs) can enhance the performance of cellular networks, due to their high mobility and efficient deployment. In this paper, we present a first study on how the user mobility affects the UAVs trajectories of a multiple-UAV assisted wireless communication system. Specifically, we consider the UAVs are deployed as aerial base stations to serve ground users who move between different regions. We maximize the throughput of ground users in the downlink communication by optimizing the UAVs trajectories, while taking into account the impact of the user mobility, propulsion energy consumption, and UAVs mutual interference. We formulate the problem as a route selection problem in an acyclic directed graph. Each vertex represents a task associated with a reward on the average user throughput in a region-time point, while each edge is associated with a cost on the energy propulsion consumption during flying and hovering. For the centralized trajectory design, we first propose the shortest path scheme that determines the optimal trajectory for the single UAV case. We also propose the centralized route selection (CRS) scheme to systematically compute the optimal trajectories for the more general multiple-UAV case. Due to the NP-hardness of the centralized problem, we consider the distributed trajectory design that each UAV selects its trajectory autonomously and propose the distributed route selection (DRS) scheme, which will converge to a pure strategy Nash equilibrium within a finite number of iterations.
The use of aerial anchors for localizing terrestrial nodes has recently been recognized as a cost-effective, swift and flexible solution for better localization accuracy, providing localization services when the GPS is jammed or satellite reception is not possible. In this paper, the localization of terrestrial nodes when using mobile unmanned aerial vehicles (UAVs) as aerial anchors is presented. We propose a novel framework to derive localization error in urban areas. In contrast to the existing works, our framework includes height-dependent UAV to ground channel characteristics and a highly detailed UAV energy consumption model. This enables us to explore different tradeoffs and optimize UAV trajectory for minimum localization error. In particular, we investigate the impact of UAV altitude, hovering time, number of waypoints and path length through formulating an energy-constrained optimization problem. Our results show that increasing the hovering time decreases the localization error considerably at the cost of a higher energy consumption. To keep the localization error below 100m, shorter hovering is only possible when the path altitude and radius are optimized. For a constant hovering time of 5 seconds, tuning both parameters to their optimal values brings the localization error from 150m down to 65m with a power saving around 25%
Unmanned aerial vehicles (UAVs) have emerged as a promising candidate solution for data collection of large-scale wireless sensor networks (WSNs). In this paper, we investigate a UAV-aided WSN, where cluster heads (CHs) receive data from their member nodes, and a UAV is dispatched to collect data from CHs along the planned trajectory. We aim to minimize the total energy consumption of the UAV-WSN system in a complete round of data collection. Toward this end, we formulate the energy consumption minimization problem as a constrained combinatorial optimization problem by jointly selecting CHs from nodes within clusters and planning the UAVs visiting order to the selected CHs. The formulated energy consumption minimization problem is NP-hard, and hence, hard to solve optimally. In order to tackle this challenge, we propose a novel deep reinforcement learning (DRL) technique, pointer network-A* (Ptr-A*), which can efficiently learn from experiences the UAV trajectory policy for minimizing the energy consumption. The UAVs start point and the WSN with a set of pre-determined clusters are fed into the Ptr-A*, and the Ptr-A* outputs a group of CHs and the visiting order to these CHs, i.e., the UAVs trajectory. The parameters of the Ptr-A* are trained on small-scale clusters problem instances for faster training by using the actor-critic algorithm in an unsupervised manner. At inference, three search strategies are also proposed to improve the quality of solutions. Simulation results show that the trained models based on 20-clusters and 40-clusters have a good generalization ability to solve the UAVs trajectory planning problem in WSNs with different numbers of clusters, without the need to retrain the models. Furthermore, the results show that our proposed DRL algorithm outperforms two baseline techniques.
The use of the unmanned aerial vehicle (UAV) has been foreseen as a promising technology for the next generation communication networks. Since there are no regulations for UAVs deployment yet, most likely they form a network in coexistence with an already existed network. In this work, we consider a transmission mechanism that aims to improve the data rate between a terrestrial base station (BS) and user equipment (UE) through deploying multiple UAVs relaying the desired data flow. Considering the coexistence of this network with other established communication networks, we take into account the effect of interference, which is incurred by the existing nodes. Our primary goal is to optimize the three-dimensional (3D) trajectories and power allocation for the relaying UAVs to maximize the data flow while keeping the interference to existing nodes below a predefined threshold. An alternating-maximization strategy is proposed to solve the joint 3D trajectory design and power allocation for the relaying UAVs. To this end, we handle the information exchange within the network by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. Simulation results show that our approach can considerably improve the information flow while the interference threshold constraint is met.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
