Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userImprovement of Noise-Robust Single-Channel Voice Activity Detection with Spatial Pre-processing
120
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Voice activity detection (VAD) remains a challenge in noisy environments. With access to multiple microphones, prior studies have attempted to improve the noise robustness of VAD by creating multi-channel VAD (MVAD) methods. However, MVAD is relatively new compared to single-channel VAD (SVAD), which has been thoroughly developed in the past. It might therefore be advantageous to improve SVAD methods with pre-processing to obtain superior VAD, which is under-explored. This paper improves SVAD through two pre-processing methods, a beamformer and a spatial target speaker detector. The spatial detector sets signal frames to zero when no potential speaker is present within a target direction. The detector may be implemented as a filter, meaning the input signal for the SVAD is filtered according to the detectors output; or it may be implemented as a spatial VAD to be combined with the SVAD output. The evaluation is made on a noisy reverberant speech database, with clean speech from the Aurora 2 database and with white and babble noise. The results show that SVAD algorithms are significantly improved by the presented pre-processing methods, especially the spatial detector, across all signal-to-noise ratios. The SVAD algorithms with pre-processing significantly outperform a baseline MVAD in challenging noise conditions.
rate research
Read More
Voice activity detection (VAD) is an essential pre-processing step for tasks such as automatic speech recognition (ASR) and speaker recognition. A basic goal is to remove silent segments within an audio, while a more general VAD system could remove all the irrelevant segments such as noise and even unwanted speech from non-target speakers. We define the task, which only detects the speech from the target speaker, as speaker-dependent voice activity detection (SDVAD). This task is quite common in real applications and usually implemented by performing speaker verification (SV) on audio segments extracted from VAD. In this paper, we propose an end-to-end neural network based approach to address this problem, which explicitly takes the speaker identity into the modeling process. Moreover, inference can be performed in an online fashion, which leads to low system latency. Experiments are carried out on a conversational telephone dataset generated from the Switchboard corpus. Results show that our proposed online approach achieves significantly better performance than the usual VAD/SV system in terms of both frame accuracy and F-score. We also used our previously proposed segment-level metric for a more comprehensive analysis.
Due to the unprecedented breakthroughs brought about by deep learning, speech enhancement (SE) techniques have been developed rapidly and play an important role prior to acoustic modeling to mitigate noise effects on speech. To increase the perceptual quality of speech, current state-of-the-art in the SE field adopts adversarial training by connecting an objective metric to the discriminator. However, there is no guarantee that optimizing the perceptual quality of speech will necessarily lead to improved automatic speech recognition (ASR) performance. In this study, we present TENET, a novel Time-reversal Enhancement NETwork, which leverages the transformation of an input noisy signal itself, i.e., the time-reversed version, in conjunction with the siamese network and complex dual-path transformer to promote SE performance for noise-robust ASR. Extensive experiments conducted on the Voicebank-DEMAND dataset show that TENET can achieve state-of-the-art results compared to a few top-of-the-line methods in terms of both SE and ASR evaluation metrics. To demonstrate the model generalization ability, we further evaluate TENET on the test set of scenarios contaminated with unseen noise, and the results also confirm the superiority of this promising method.
This letter introduces a novel speech enhancement method in the Hilbert-Huang Transform domain to mitigate the effects of acoustic impulsive noises. The estimation and selection of noise components is based on the impulsiveness index of decomposition modes. Speech enhancement experiments are conducted considering five acoustic noises with different impulsiveness index and non-stationarity degrees under various signal-to-noise ratios. Three speech enhancement algorithms are adopted as baseline in the evaluation analysis considering spectral and time domains. The proposed solution achieves the best results in terms of objective quality measures and similar speech intelligibility rates to the competitive methods.
We address the problem of privately communicating audio messages to multiple listeners in a reverberant room using a set of loudspeakers. We propose two methods based on emitting noise. In the first method, the loudspeakers emit noise signals that are appropriately filtered so that after echoing along multiple paths in the room, they sum up and descramble to yield distinct meaningful audio messages only at specific focusing spots, while being incoherent everywhere else. In the second method, adapted from wireless communications, we project noise signals onto the nullspace of the MIMO channel matrix between the loudspeakers and listeners. Loudspeakers reproduce a sum of the projected noise signals and intended messages. Again because of echoes, the MIMO nullspace changes across different locations in the room. Thus, the listeners at focusing spots hear intended messages, while the acoustic channel of an eavesdropper at any other location is jammed. We show, using both numerical and real experiments, that with a small number of speakers and a few impulse response measurements, audio messages can indeed be communicated to a set of listeners while ensuring negligible intelligibility elsewhere.
This paper proposes a full-band and sub-band fusion model, named as FullSubNet, for single-channel real-time speech enhancement. Full-band and sub-band refer to the models that input full-band and sub-band noisy spectral feature, output full-band and sub-band speech target, respectively. The sub-band model processes each frequency independently. Its input consists of one frequency and several context frequencies. The output is the prediction of the clean speech target for the corresponding frequency. These two types of models have distinct characteristics. The full-band model can capture the global spectral context and the long-distance cross-band dependencies. However, it lacks the ability to modeling signal stationarity and attending the local spectral pattern. The sub-band model is just the opposite. In our proposed FullSubNet, we connect a pure full-band model and a pure sub-band model sequentially and use practical joint training to integrate these two types of models advantages. We conducted experiments on the DNS challenge (INTERSPEECH 2020) dataset to evaluate the proposed method. Experimental results show that full-band and sub-band information are complementary, and the FullSubNet can effectively integrate them. Besides, the performance of the FullSubNet also exceeds that of the top-ranked methods in the DNS Challenge (INTERSPEECH 2020).
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
