Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUplink Channel Impulse Response Based Secondary Carrier Prediction
115
0
0.0
(
0
)
Added by
Vijaya Yajnanarayana Ph.D
Publication date
2021
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
A typical handover problem requires sequence of complex signaling between a UE, the serving, and target base station. In many handover problems the down link based measurements are transferred from a user equipment to a serving base station and the decision on handover is made on these measurements. These measurements together with the signaling between the user equipment and the serving base station is computationally expensive and can potentially drain user equipment battery. Coupled with this, the future networks are densely deployed with multiple frequency layers, rendering current handover mechanisms sub-optimal, necessitating newer methods that can improve energy efficiency. In this study, we will investigate a ML based approach towards secondary carrier prediction for inter-frequency handover using the up-link reference signals.
rate research
Read More
In this preliminary work, we study the problem of {it distributed} authentication in wireless networks. Specifically, we consider a system where multiple Bob (sensor) nodes listen to a channel and report their {it correlated} measurements to a Fusion Center (FC) which makes the ultimate authentication decision. For the feature-based authentication at the FC, channel impulse response has been utilized as the device fingerprint. Additionally, the {it correlated} measurements by the Bob nodes allow us to invoke Compressed sensing to significantly reduce the reporting overhead to the FC. Numerical results show that: i) the detection performance of the FC is superior to that of a single Bob-node, ii) compressed sensing leads to at least $20%$ overhead reduction on the reporting channel at the expense of a small ($<1$ dB) SNR margin to achieve the same detection performance.
Using commodity WiFi data for applications such as indoor localization, object identification and tracking and channel sounding has recently gained considerable attention. We study the problem of channel impulse response (CIR) estimation from commodity WiFi channel state information (CSI). The accuracy of a CIR estimation method in this setup is limited by both the available channel bandwidth as well as various CSI distortions induced by the underlying hardware. We propose a multi-band splicing method that increases channel bandwidth by combining CSI data across multiple frequency bands. In order to compensate for the CSI distortions, we develop a per-band processing algorithm that is able to estimate the distortion parameters and remove them to yield the clean CSI. This algorithm incorporates the atomic norm denoising sparse recovery method to exploit channel sparsity. Splicing clean CSI over M frequency bands, we use orthogonal matching pursuit (OMP) as an estimation method to recover the sparse CIR with high (M-fold) resolution. Unlike previous works in the literature, our method does not appeal to any limiting assumption on the CIR (other than the widely accepted sparsity assumption) or any ad hoc processing for distortion removal. We show, empirically, that the proposed method outperforms the state of the art in terms of localization accuracy.
In this study, we propose two schemes for uplink control channels based on non-contiguous complementary sequences (CSs) where the peak-to-average-power ratio (PAPR) of the resulting orthogonal frequency division multiplexing (OFDM) signal is always less than or equal to 3 dB. To obtain the proposed schemes, we extend Golays concatenation and interleaving methods by considering extra upsampling and shifting parameters. The proposed schemes enable a flexible non-contiguous resource allocation in frequency, e.g., an arbitrary number of null symbols between the occupied resource blocks (RBs). The first scheme separates the PAPR minimization and the inter-cell interference minimization problems. While the former is solved by spreading the sequences in a Golay complementary pair (GCP) with the sequences in another GCP, the latter is managed by designing a set of GCPs with low cross-correlation. The second scheme generates reference symbols (RSs) and data symbols on each RB as parts of an encoded CS. Therefore, it enables coherent detection at the receiver side. The numerical results show that the proposed schemes offer significantly improved PAPR and cubic metric (CM) results in case of non-contiguous resource allocation as compared to the sequences defined in 3GPP New Radio (NR) and Zadoff-Chu (ZC) sequences.
This paper proposes a parametric channel estimation algorithm applicable to uplink of OFDMA systems with pseudo-random subchannelization. It exploits the hopping pilots to facilitate ESPRIT to estimate the delay subspace of the multipath fading channel, and utilizes the global pilot tones to interpolate on data subcarriers. Hence, it outperforms the traditional local channel interpolators considerably.
This paper provides the signal-to-interference-plus-noise ratio (SINR) complimentary cumulative distribution function (CCDF) and average data rate of the normalized SNR-based scheduling in an uplink cellular network using stochastic geometry. The uplink analysis is essentially different from the downlink analysis in that the per-user transmit power control is performed and that the interferers are composed of at most one transmitting user in each cell other than the target cell. In addition, as the effect of multi-user diversity varies from cell to cell depending on the number of users involved in the scheduling, the distribution of the number of users is required to obtain the averaged performance of the scheduling. This paper derives the SINR CCDF relative to the typical scheduled user by focusing on two incompatible cases, where the scheduler selects a user from all the users in the corresponding Voronoi cell or does not select users near cell edges. In each case, the SINR CCDF is marginalized over the distribution of the number of users involved in the scheduling, which is asymptotically correct if the BS density is sufficiently large or small. Through the simulations, the accuracies of the analytical results are validated for both cases, and the scheduling gains are evaluated to confirm the multi-user diversity gain.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
