Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe Anatomy of an Unusual Edge-on Protoplanetary Disk I. Dust Settling in a Cold Disk
96
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
As the earliest stage of planet formation, massive, optically thick, and gas rich protoplanetary disks provide key insights into the physics of star and planet formation. When viewed edge-on, high resolution images offer a unique opportunity to study both the radial and vertical structures of these disks and relate this to vertical settling, radial drift, grain growth, and changes in the midplane temperatures. In this work, we present multi-epoch HST and Keck scattered light images, and an ALMA 1.3 mm continuum map for the remarkably flat edge-on protoplanetary disk SSTC2DJ163131.2-242627, a young solar-type star in $rho$ Ophiuchus. We model the 0.8 $mu$m and 1.3 mm images in separate MCMC runs to investigate the geometry and dust properties of the disk using the MCFOST radiative transfer code. In scattered light, we are sensitive to the smaller dust grains in the surface layers of the disk, while the sub-millimeter dust continuum observations probe larger grains closer to the disk midplane. An MCMC run combining both datasets using a covariance-based log-likelihood estimation was marginally successful, implying insufficient complexity in our disk model. The disk is well characterized by a flared disk model with an exponentially tapered outer edge viewed nearly edge-on, though some degree of dust settling is required to reproduce the vertically thin profile and lack of apparent flaring. A colder than expected disk midplane, evidence for dust settling, and residual radial substructures all point to a more complex radial density profile to be probed with future, higher resolution observations.
rate research
Read More
We present high-resolution $^{12}$CO and $^{13}$CO 2-1 ALMA observations, as well as optical and near-infrared spectroscopy, of the highly-inclined protoplanetary disk around SSTC2D J163131.2-242627. The spectral type we derive for the source is consistent with a $rm 1.2 , M_{odot}$ star inferred from the ALMA observations. Despite its massive circumstellar disk, we find little to no evidence for ongoing accretion on the star. The CO maps reveal a disk that is unusually compact along the vertical direction, consistent with its appearance in scattered light images. The gas disk extends about twice as far away as both the submillimeter continuum and the optical scattered light. CO is detected from two surface layers separated by a midplane region in which CO emission is suppressed, as expected from freeze-out in the cold midplane. We apply a modified version of the Topographically Reconstructed Distribution method presented by Dutrey et al. 2017 to derive the temperature structure of the disk. We find a temperature in the CO-emitting layers and the midplane of $sim$33 K and $sim$20 K at $rm R<200$ au, respectively. Outside of $rm R>200$ au, the disks midplane temperature increases to $sim$30 K, with a nearly vertically isothermal profile. The transition in CO temperature coincides with a dramatic reduction in the sub-micron and sub-millimeter emission from the disk. We interpret this as interstellar UV radiation providing an additional source of heating to the outer part of the disk.
High-resolution observations of edge-on proto-planetary disks in emission from molecular species sampling different critical densities and formation pathways offer the opportunity to trace the vertical chemical and physical structures of protoplanetary disks. Based on analysis of sub-arcsecond resolution Atacama Large Millimeter Array (ALMA) archival data for the edge-on Flying Saucer disk (2MASS J16281370-2431391), we establish the vertical and radial differentiation of the disk CN emitting regions with respect to those of $^{12}$CO and CS, and we model the disk physical conditions from which the CN emission arises. We demonstrate that the disk $^{12}$CO (2-1), CN (2-1), and CS J=5-4 emitting regions decrease in scale height above the midplane, such that 12CO, CN, and CS trace layers of increasing density and decreasing temperature. We find that at radii > 100 au from the central star, CN emission arises predominantly from intermediate layers, while in the inner region of the disk, CN appears to arise from layers closer to the midplane. We investigate disk physical conditions within the CN emitting regions, as well as the ranges of CN excitation temperature and column density, via RADEX non-LTE modeling of the three brightest CN hyperfine lines. Near the disk midplane, where we derive densities nH2 ~10$^{7}$ cm$^{-3}$ at relatively low T$_{kin}$ (~12 K), we find that CN is thermalized, while sub-thermal, non-LTE conditions appear to obtain for CN emission from higher (intermediate) disk layers. We consider whether and how the particular spatial location and excitation conditions of CN emission from the Flying Saucer can be related to CN production that is governed, radially and vertically, by the degree of irradiation of the flared disk by X-rays and UV photons from the central star.
Determining the gas density and temperature structures of protoplanetary disks is a fundamental task to constrain planet formation theories. This is a challenging procedure and most determinations are based on model-dependent assumptions. We attempt a direct determination of the radial and vertical temperature structure of the Flying Saucer disk, thanks to its favorable inclination of 90 degrees. We present a method based on the tomographic study of an edge-on disk. Using ALMA, we observe at 0.5$$ resolution the Flying Saucer in CO J=2-1 and CS J=5-4. This edge-on disk appears in silhouette against the CO J=2-1 emission from background molecular clouds in $rho$ Oph. The combination of velocity gradients due to the Keplerian rotation of the disk and intensity variations in the CO background as a function of velocity provide a direct measure of the gas temperature as a function of radius and height above the disk mid-plane. The overall thermal structure is consistent with model predictions, with a cold ($< 15-12 $~K), CO-depleted mid-plane, and a warmer disk atmosphere. However, we find evidence for CO gas along the mid-plane beyond a radius of about 200,au, coincident with a change of grain properties. Such a behavior is expected in case of efficient rise of UV penetration re-heating the disk and thus allowing CO thermal desorption or favoring direct CO photo-desorption. CO is also detected up to 3-4 scale heights while CS is confined around 1 scale height above the mid-plane. The limits of the method due to finite spatial and spectral resolutions are also discussed. This method appears to be very promising to determine the gas structure of planet-forming disks, provided that the molecular data have an angular resolution which is high enough, of the order of $0.3 - 0.1$ at the distance of the nearest star forming regions.
We performed a sensitive search for the ground-state emission lines of ortho- and para-water vapor in the DM Tau protoplanetary disk using the Herschel/HIFI instrument. No strong lines are detected down to 3sigma levels in 0.5 km/s channels of 4.2 mK for the 1_{10}--1_{01} line and 12.6 mK for the 1_{11}--0_{00} line. We report a very tentative detection, however, of the 1_{10}--1_{01} line in the Wide Band Spectrometer, with a strength of T_{mb}=2.7 mK, a width of 5.6 km/s and an integrated intensity of 16.0 mK km/s. The latter constitutes a 6sigma detection. Regardless of the reality of this tentative detection, model calculations indicate that our sensitive limits on the line strengths preclude efficient desorption of water in the UV illuminated regions of the disk. We hypothesize that more than 95-99% of the water ice is locked up in coagulated grains that have settled to the midplane.
We propose a set of standard assumptions for the modelling of Class II and III protoplanetary disks, which includes detailed continuum radiative transfer, thermo-chemical modelling of gas and ice, and line radiative transfer from optical to cm wavelengths. We propose new standard dust opacities for disk models, we present a simplified treatment of PAHs sufficient to reproduce the PAH emission features, and we suggest using a simple treatment of dust settling. We roughly adjust parameters to obtain a model that predicts typical Class II T Tauri star continuum and line observations. We systematically study the impact of each model parameter (disk mass, disk extension and shape, dust settling, dust size and opacity, gas/dust ratio, etc.) on all continuum and line observables, in particular on the SED, mm-slope, continuum visibilities, and emission lines including [OI] 63um, high-J CO lines, (sub-)mm CO isotopologue lines, and CO fundamental ro-vibrational lines. We find that evolved dust properties (large grains) often needed to fit the SED, have important consequences for disk chemistry and heating/cooling balance, leading to stronger emission lines in general. Strong dust settling and missing disk flaring have similar effects on continuum observations, but opposite effects on far-IR gas emission lines. PAH molecules can shield the gas from stellar UV radiation because of their strong absorption and negligible scattering opacities. The observable millimetre-slope of the SED can become significantly more gentle in the case of cold disk midplanes, which we find regularly in our T Tauri models. We propose to use line observations of robust chemical tracers of the gas, such as O, CO, and H2, as additional constraints to determine some key properties of the disks, such as disk shape and mass, opacities, and the dust/gas ratio, by simultaneously fitting continuum and line observations.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
