Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInfluence of the shape of RDX grains on the creation of hot spots by mesoscale modeling
112
0
0.0
(
0
)
Authors
Steve Belon
Ask ChatGPT about the research
No Arabic abstract
CEA-Gramat studies the sensitivity of energetic materials to enhance their security and reliability. The conditions leading to the initiation of an explosive must be understood to control its sensitivity. According to the hot spots theory, the shock initiation of heterogeneous explosives is related to their microstructure: the shock interacts with the heterogeneities of the microstructure (pores and inclusions, morphology of grains and fragments, debonding, etc.) and creates local deposits of energy. To describe these hot spots, energetic materials have to be modeled at a scale allowing the discretization of their microstructure: the mesoscale. Micro-computed tomographies of energetic materials are done at CEA-Gramat and analyzed to build geometric models used in finite element simulations. Two kinds of models are studied:-Real models are directly built on the real microstructures extracted from micro-computed tomographies.-Virtual models are based on the same microstructures but simplified to study independently the effects of microstructural parameters (granulometry, porosity, filler content{ldots}) on the creation of hot spots. Compositions based on different kind of RDX particles in an inert binder are studied through numerical simulation. The influence of particle shape on the inert shock response is investigated at the mesoscale. Local heterogeneities of pressure and temperature fields appear intimately related to the morphological properties of the microstructures. Particles with sharp edges create more hot spots than spherical particles.
rate research
Read More
We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildings. A significant substitution of soils by inclusions, acting as foundations, raises the question of the effective dynamic properties of these structured soils. Buildings, in the case of perfect elastic conditions for both soil and buildings, are shown to interact and strongly influence elastic surface waves; such site-city seismic interactions were pointed out in [Bulletin of Seismological Society of America 92, 794-811, 2002], and we investigate a variety of scenarios to illustrate the variety of behaviours possible.
Angle-resolved photoemission spectroscopy (ARPES) is used to study the energy and momentum dependence of the inelastic scattering rates and the mass renormalization of charge carriers in LiFeAs at several high symmetry points in the Brillouin zone. A strong and linear-in-energy scattering rate is observed for sections of the Fermi surface having predominantly Fe $3d_{xy/yz}$ orbital character on the inner hole and on electron pockets. We assign them to hot spots with marginal Fermi liquid character inducing high antiferromagnetic and pairing susceptibilities. The outer hole pocket, with Fe $3d_{xy}$ orbital character, has a reduced but still linear in energy scattering rate. Finally, we assign sections on the middle hole pockets with Fe $3d_{xz,yz}$ orbital character and on the electron pockets with Fe $3d_{xy}$ orbital character to cold spots because there we observe a quadratic-in-energy scattering rate with Fermi-liquid behavior. These cold spots prevail the transport properties. Our results indicate a strong $it{momentum}$ dependence of the scattering rates. We also have indications that the scattering rates in correlated systems are fundamentally different from those in non-correlated materials because in the former the Pauli principle is not operative. We compare our results for the scattering rates with combined density functional plus dynamical mean-field theory calculations. The work provides a generic microscopic understanding of macroscopic properties of multiorbital unconventional superconductors.
Let $D subset mathbb{R}^d$ be a bounded, connected domain with smooth boundary and let $-Delta u = mu_1 u$ be the first nontrivial eigenfunction of the Laplace operator with Neumann boundary conditions. We prove $$ |u|_{L^{infty}(D)} leq 60 cdot |u|_{L^{infty}(partial D)}.$$ This shows that the Hot Spots Conjecture cannot fail by an arbitrary factor. An example of Kleefeld shows that the optimal constant is at least $1 + 10^{-3}$.
The influence of the space charge of ions emitted from the surface of a conical spike on its shape has been studied. The problem of the calculation of the spatial distributions of the electric field, ion velocity field, and the space charge density near the cone tip has been reduced to the analysis of a system of ordinary differential equations. As a result of numerical solution of these equations, the criterion of the balance of the capillary and electrostatic forces on the conic surface of a liquid-metal anode has been determined. It has allowed us to relate the electrical current flowing through the system, the applied potential difference and the cone angle. We have compared the results of our calculations with available experimental data concerning emission from the surface of pure liquid gallium (Ga), indium (In), tin (Sn), and some liquid alloys, such as Au+Si, Co+Ge, and Au+Ge. On the basis of the proposed model, explanations have been given for a number of specific features of the emissive behavior of different systems.
If a tennis ball is held above a basket ball with their centers vertically aligned, and the balls are released to collide with the floor, the tennis ball may rebound at a surprisingly high speed. We show in this article that the simple textbook explanation of this effect is an oversimplification, even for the limit of perfectly elastic particles. Instead, there may occur a rather complex scenario including multiple collisions which may lead to a very different final velocity as compared with the velocity resulting from the oversimplified model.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
