Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userImpact of invasive metal probes on Hall measurements in semiconductor nanostructures
119
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Recent advances in bottom-up growth are giving rise to a range of new two-dimensional nanostructures. Hall effect measurements play an important role in their electrical characterization. However, size constraints can lead to device geometries that deviate significantly from the ideal of elongated Hall bars with currentless contacts. Many devices using these new materials have a low aspect ratio and feature metal Hall probes that overlap with the semiconductor channel. This can lead to a significant distortion of the current flow. We present experimental data from InAs 2D nanofin devices with different Hall probe geometries to study the influence of Hall probe length and width. We use finite-element simulations to further understand the implications of these aspects and expand the scope to contact resistance and sample aspect ratios. Our key finding is that invasive probes lead to a significant underestimation in the measured Hall voltage, typically of the order of 40-80%. This in turn leads to a subsequent proportional overestimation of carrier concentration and an underestimation of mobility
rate research
Read More
Ferromagnetic (FM)/heavy metal (HM) nanostructures can be used for the magnetic state readout in the proposed magneto-electric spin-orbit logic by locally injecting a spin-polarized current and measure the spin-to-charge conversion via the spin Hall effect. However, this local configuration is prone to spurious signals. In this work, we address spurious Hall effects that can contaminate the spin Hall signal in these FM/HM T-shaped nanostructures. The most pronounced Hall effects in our Co50Fe50/Pt nanostructures are the planar Hall effect and the anomalous Hall effect generated in the FM nanowire. We find that the planar Hall effect, induced by misalignment between magnetization and current direction in the FM wire, is manifested as a shift in the measured baseline resistance, but does not alter the spin Hall signal. In contrast, the anomalous Hall effect, arising from the charge current distribution within the FM, adds to the spin Hall signal. However, the effect can be made insignificant by minimizing the shunting effect via proper design of the device. We conclude that local spin injection in FM/HM nanostructures is a suitable tool for measuring spin Hall signals and, therefore, a valid method for magnetic state readout in prospective spin-based logic.
An open resonator fabricated in a two-dimensional electron gas is used to explore the transition from strongly invasive scanning gate microscopy to the perturbative regime of weak tip-induced potentials. With the help of numerical simulations that faithfully reproduce the main experimental findings, we quantify the extent of the perturbative regime in which the tip-induced conductance change is unambiguously determined by properties of the unperturbed system. The correspondence between the experimental and numerical results is established by analyzing the characteristic length scale and the amplitude modulation of the conductance change. In the perturbative regime, the former is shown to assume a disorder-dependent maximum value, while the latter linearly increases with the strength of a weak tip potential.
Modern opto-electronic devices are based on semiconductor heterostructures employing the process of electron-hole pair annihilation. In particular polar materials enable a variety of classic and even quantum light sources, whose on-going optimisation endeavours challenge generations of researchers. However, the key challenge - the inherent electric crystal polarisation of such materials - remains unsolved and deteriorates the electron-hole pair annihilation rate. Here, our approach introduces a sequence of reverse interfaces to compensate these polarisation effects, while the polar, natural crystal growth direction is maintained provoking a boost in device performance. Former research approaches like growth on less-polar crystal planes or even the stabilization of unnatural phases never reached industrial maturity. In contrast, our solution allows the adaptation of all established industrial processes, while the polarisation becomes adjustable; even across zero. Hence, our approach marks the onset of an entire class of ultra-fast and efficient devices based on any polar material.
As an interesting surface plasmon phenomenon discovered several years ago, electromagnetic field redistribution in nanoparticle dimer on film system provides a novel thought to enhance the light power on a plain film which could been widely used in surface enhanced Raman scattering (SERS), solar cells, photo-catalysis, etc. Homodimers on film are mainly investigated in past years, while the properties of heterodimers on film are still unclear. In this work, size difference induced electromagnetic field redistribution in Ag nanoparticle dimer on Au film system is investigated first. The results obtained from finite element method indicate that the smaller nanoparticle has much greater ability to focus light energy on Au film, which even reached more than 5 time compared to the larger one. Further researches indicate that this energy focusing ability has a strong relationship to the wavelength and diameter ration in dimer. Similar focusing phenomenon is found in the system of thick wire-smaller particle on film. Later, the SERS spectra collected in the small nanoparticle-large nanowire system provide an experimental evidence for this theoretic predication. Our results strengthen the understanding of surface plasmon on plane film and have potential application prospects in the surface plasmon related fields.
Pyramidal quantum dots (QDs) grown in inverted recesses have demonstrated over the years an extraordinary uniformity, high spectral purity and strong design versatility. We discuss recent results, also in view of the Stranski-Krastanow competition and give evidence for strong perspectives in quantum information applications for this system. We examine the possibility of generating entangled and indistinguishable photons, together with the need for the implementation of a, regrettably still missing, strategy for electrical control.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
