Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new user6TiSCH++ with Bluetooth 5 and Concurrent Transmissions
301
0
0.0
(
0
)
Added by
Michael Baddeley Dr
Publication date
2020
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Targeting dependable communications for industrial Internet of Things applications, IETF 6TiSCH provides mechanisms for efficient scheduling, routing, and forwarding of IPv6 traffic across low-power mesh networks. Yet, despite an overwhelming body of literature covering both centralized and distributed scheduling schemes for 6TiSCH, an effective control solution for large-scale multi-hop mesh networks remains an open challenge. This paper addresses this with a novel approach that eliminates much of the routing and link-layer overhead incurred by centralized schedulers, and provides a robust mechanism for data dissemination synchronization within 6TiSCH. Specifically, we leverage the physical layer (PHY) switching capabilities of modern low-power wireless platforms to build on recent work demonstrating the viability of Concurrent Transmission (CT)-based flooding protocols across the Bluetooth 5 (BT 5) PHYs. By switching the PHY and MAC layer at runtime, we inject a BT 5-based CT flood within a standard IEEE 802.15.4 TSCH slotframe, thereby providing a reliable, low-latency scheme for 6TiSCH control messaging. We present an analytical model and experimental evaluation showing how our solution not only exploits the BT 5 high data-rate PHY layers for rapid data dissemination, but can also provide reliable 6TiSCH association and synchronization even under external radio interference. We further discuss how the proposed technique can be used to address other open challenges within the standard.
rate research
Read More
Six years after the adoption of the standard 4.0, the Bluetooth Special Interest Group (SIG), a non-profit association that deals with the study and the development of technology standards including those of Bluetooth, has officially released the main features of Bluetooth 5.0. It is one of the significant developments in short-range wireless communication technology. As stated by the SIG, the new standard will forever change the way people approach the Internet of Things (IoT), turning it into something that takes place around them in an almost natural and transparent way. In this article, the future IoT scenarios and use cases that justify the push for Bluetooth 5 are introduced. A set of new technical features that are included in Bluetooth 5 are presented, and their advantages and drawbacks are described.
The popularity of concurrent transmissions (CT) has soared after recent studies have shown their feasibility on the four physical layers specified by BLE 5, hence providing an alternative to the use of IEEE 802.15.4 for the design of reliable and efficient low-power wireless protocols. However, to date, the extent to which physical layer properties affect the performance of CT has not yet been investigated in detail. This paper fills this gap and provides the first extensive study on the impact of the physical layer on CT-based solutions using IEEE 802.15.4 and BLE 5. We first highlight through simulation how the impact of errors induced by de-synchronization and beating on the performance of CT highly depends on the choice of the underlying physical layer. We then confirm these observations experimentally on real hardware through an analysis of the bit error distribution across received packets, unveiling possible techniques to effectively handle these errors. We further study the performance of CT-based flooding protocols in the presence of radio interference on a large-scale, and derive important insights on how the used physical layer affects their dependability.
The IETF 6TiSCH working group fosters the adaptation of IPv6-based protocols into Internet of Things by introducing the 6TiSCH Operation Sublayer (6top). The 6TiSCH architecture integrates the high reliability and low-energy consumption of IEEE 802.15.4e Time Slotted Channel Hopping (TSCH) with IPv6. IEEE 802.15.4e TSCH defines only the communication between nodes through a schedule but it does not specify how the resources are allocated for communication between the nodes in 6TiSCH networks. We propose a distributed algorithm for bandwidth allocation, called Local Voting, that adapts the schedule to the network conditions. The algorithm tries to equalize the link load (defined as the ratio of the queue length plus the new packet arrivals, over the number of allocated cells) through cell reallocation by calculating the number of cells to be added or released by 6top. Simulation results show that equalizing the load throughout 6TiSCH network provides better fairness in terms of load, reduces the queue sizes and packets reach the root faster compared to representative algorithms from the literature. Local Voting combines good delay performance and energy efficiency that are crucial features for Industrial Internet-of-Things applications.
We consider the problem of efficient packet dissemination in wireless networks with point-to-multi-point wireless broadcast channels. We propose a dynamic policy, which achieves the broadcast capacity of the network. This policy is obtained by first transforming the original multi-hop network into a precedence-relaxed virtual single-hop network and then finding an optimal broadcast policy for the relaxed network. The resulting policy is shown to be throughput-optimal for the original wireless network using a sample-path argument. We also prove the NP-completeness of the finite-horizon broadcast problem, which is in contrast with the polynomial time solvability of the problem with point-to-point channels. Illustrative simulation results demonstrate the efficacy of the proposed broadcast policy in achieving the full broadcast capacity with low delay.
A novel and compact tri-band planar antenna for 2.4/5.2/5.8-GHz wireless local area network (WLAN), 2.3/3.5/5.5GHz Worldwide Interoperability for Microwave Access (WiMAX) and Bluetooth applications is proposed and studied in this paper. The antenna comprises of a L-shaped element which is coupled with a ground shorted parasitic resonator to generate three resonant modes for tri-band operation. The L-shaped element which is placed on top of the substrate is fed by a 50$Omega$ microstrip feed line and is responsible for the generation of a wide band at 5.5 GHz. The parasitic resonator is placed on the other side of the substrate and is directly connected to the ground plane. The presence of the parasitic resonator gives rise to two additional resonant bands at 2.3 GHz and 3.5 GHz. Thus, together the two elements generate three resonant bands to cover WLAN, WiMAX and Bluetooth bands of operation. A thorough parametric study has been performed on the antenna and it has been found that the three bands can be tuned by varying certain dimensions of the antenna. Hence, the same design can be used for frequencies in adjacent bands as well with minor changes in its dimensions. Important antenna parameters such as return loss, radiation pattern and peak gains in the operating bands have been studied in detail to prove that the proposed design is a promising candidate for the aforementioned wireless technologies.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
