Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOffcut-related step-flow and growth rate enhancement during (100) $beta$-Ga2O3 homoepitaxy by metal-exchange catalyzed molecular beam epitaxy (MEXCAT-MBE)
81
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work we investigate the growth of $beta$-Ga2O3 homoepitaxial layers on top of (100) oriented substrates via indium-assisted metal exchange catalyzed molecular beam epitaxy (MEXCAT-MBE) which have exhibited prohibitively low growth rates by non-catalyzed MBE in the past. We demonstrate that the proper tuning of the MEXCAT growth parameters and the choice of a proper substrate offcut allow for the deposition of thin films with high structural quality via step-flow growth mechanism at relatively high growth rates for $beta$-Ga2O3 homoepitaxy (i.e., around 1.5 nm/min, $approx$45% incorporation of the incoming Ga flux), making MBE growth on this orientation feasible. Moreover, through the employment of the investigated four different (100) substrate offcuts along the [00-1] direction (i.e., 0$^circ$, 2$^circ$, 4$^circ$, 6$^circ$) we give experimental evidence on the fundamental role of the (-201) step edges as nucleation sites for growth of (100)-oriented Ga2O3 films by MBE.
rate research
Read More
Smooth interfaces and surfaces are beneficial for most (opto)electronic devices based on thin films and their heterostructures. For example, smoother interfaces in (010) beta-Ga2O3/(AlxGa1-x)2O3 heterostructures, whose roughness is ruled by that of the Ga2O3 layer, can enable higher mobility 2DEGs by reducing interface roughness scattering. To this end we experimentally prove that a substrate offcut along the [001] direction allows to obtain smooth beta-Ga2O3 layers in (010)-homoepitaxy under metal-rich conditions. Applying In-mediated metal-exchange catalysis (MEXCAT) in molecular beam epitaxy at high substrate temperatures (Tg = 900 {deg}C) we compare the morphology of layers grown on (010)-oriented substrates with different unintentional offcuts. The layer roughness is generally ruled by (i) (110) and (-110)-facets visible as elongated features along the [001] direction (rms < 0.5 nm), and (ii) trenches (5-10 nm deep) orthogonal to [001]. We show that an unintentional substrate offcut of only 0.1{deg} almost oriented along the [001] direction suppresses these trenches resulting in a smooth morphology with a roughness exclusively determined by the facets, i.e., rms 0.2 nm. Since we found the facet-and-trench morphology in layers grown by MBE with and without MEXCAT, we propose that the general growth mechanism for (010)-homoepitaxy is ruled by island growth whose coalescence results in the formation of the trenches. The presence of a substrate offcut in the [001] direction can allow for step-flow growth or island nucleation at the step edges, which prevents the formation of trenches. Moreover, we give experimental evidence for a decreasing surface diffusion length or increasing nucleation density with decreasing metal-to-oxygen flux ratio. Based on our results we can rule-out step bunching as cause of the trench formation as well as a surfactant-effect of indium during MEXCAT.
Using scanning tunneling microscopy (STM), we investigate oxide-induced growth pits in Si thin films deposited by molecular beam epitaxy. In the transition temperature range from 2D adatom islanding to step-flow growth, systematic controlled air leaks into the growth chamber induce pits in the growth surface. We show that pits are also correlated with oxygen-contaminated flux from Si sublimation sources. From a thermodynamic standpoint, multilayer growth pits are unexpected in relaxed homoepitaxial growth, whereas oxidation is a known cause for step pinning, roughening, and faceting on elemental surfaces, both with and without growth flux. Not surprisingly, pits are thermodynamically metastable and heal by annealing to recover a smooth periodic step arrangement. STM reveals new details about the pits atomistic origins and growth dynamics. We give a model for heterogeneous nucleation of pits by preferential adsorption of {AA}-sized oxide nuclei at intrinsic growth antiphase boundaries, and subsequent step pinning and bunching around the nuclei.
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 {deg}C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.
The growth of single layer graphene nanometer size domains by solid carbon source molecular beam epitaxy on hexagonal boron nitride (h-BN) flakes is demonstrated. Formation of single-layer graphene is clearly apparent in Raman spectra which display sharp optical phonon bands. Atomic-force microscope images and Raman maps reveal that the graphene grown depends on the surface morphology of the h-BN substrates. The growth is governed by the high mobility of the carbon atoms on the h-BN surface, in a manner that is consistent with van der Waals epitaxy. The successful growth of graphene layers depends on the substrate temperature, but is independent of the incident flux of carbon atoms.
We report on the growth of epitaxial Sr2RuO4 films using a hybrid molecular beam epitaxy approach in which a volatile precursor containing RuO4 is used to supply ruthenium and oxygen. The use of the precursor overcomes a number of issues encountered in traditional MBE that uses elemental metal sources. Phase-pure, epitaxial thin films of Sr2RuO4 are obtained. At high substrate temperatures, growth proceeds in a layer-by-layer mode with intensity oscillations observed in reflection high-energy electron diffraction. Films are of high structural quality, as documented by x-ray diffraction, atomic force microscopy, and transmission electron microscopy. The method should be suitable for the growth of other complex oxides containing ruthenium, opening up opportunities to investigate thin films that host rich exotic ground states.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
