Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEngineering the reciprocal space for ultrathin GaAs solar cells
87
0
0.0
(
0
)
Added by
Jeronimo Buencuerpo
Publication date
2020
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
III-V solar cells dominate the high efficiency charts, but with significantly higher cost than other solar cells. Ultrathin III-V solar cells can exhibit lower production costs and immunity to short carrier diffusion lengths caused by radiation damage, dislocations, or native defects. Nevertheless, solving the incomplete optical absorption of sub-micron layers presents a challenge for light-trapping structures. Simple photonic crystals have high diffractive efficiencies, which are excellent for narrow-band applications. Random structures a broadband response instead but suffer from low diffraction efficiencies. Quasirandom (hyperuniform) structures lie in between providing high diffractive efficiency over a target wavelength range, broader than simple photonic crystals, but narrower than a random structure. In this work, we present a design method to evolve a simple photonic crystal into a quasirandom structure by modifying the spatial-Fourier space in a controlled manner. We apply these structures to an ultrathin GaAs solar cell of only 100 nm. We predict a photocurrent for the tested quasirandom structure of 25.3 mA/cm$^2$, while a planar structure would be limited to 16.1 mA/cm$^2$. The modified spatial-Fourier space in the quasirandom structure increases the amount of resonances, with a progression from discrete number of peaks to a continuum in the absorption. The enhancement in photocurrent is stable under angle variations because of this continuum. We also explore the robustness against changes in the real-space distribution of the quasirandom structures using different numerical seeds, simulating variations in a self-assembly method.
rate research
Read More
Strong interference in ultrathin film semiconductor absorbers on metallic back reflectors has been shown to enhance the light harvesting efficiency of solar cell materials. However, metallic back reflectors are not suitable for tandem cell configurations because photons cannot be transmitted through the device. Here, we introduce a method to implement strong interference in ultrathin film top absorbers in a tandem cell configuration through use of distributed Bragg reflectors (DBRs). We showcase this by designing and fabricating a photoelectrochemical-photovoltaic (PEC-PV) stacked tandem cell in a V-shaped configuration where short wavelength photons are reflected back to the photoanode material (hematite, Fe2O3), whereas long wavelength photons are transmitted to the bottom silicon PV cell. We employ optical simulations to determine the optimal thicknesses of the DBR layers and the V-shape angle to maximize light absorption in the ultrathin (10 nm thick) hematite film. The DBR spectral response can be tailored to allow for a more than threefold enhancement in absorbed photons compared to a layer of the same thickness on transparent current collectors. Using a DBR to couple a bottom silicon PV cell with an ultrathin hematite top PEC cell, we demonstrate unassisted solar water splitting and show that DBRs can be designed to enhance strong interference in ultrathin films while enabling stacked tandem cell configuration.
Semi-transparent photovoltaics (ST-PV) provide smart spatial solutions to integrate solar cells into already-built areas. Here, we study the potential of semiconductor nanowires (NWs) as promising ST-PV. We perform FDTD simulations for different PV materials in a wide range of array geometries, from which we compute PV performance next to perceived appearance. Surprisingly we find an unusual compromise between photocurrent and transmittance as a function of NW diameter that enables NW-based PV to outperform theoretical limits of non-wavelength selective ST-PV. We theoretically and experimentally demonstrate the robustness of NW arrays to different illumination conditions. We provide the origin behind the outperforming NW array geometries, which is crucial for designing NW-based ST-PV systems based on specific needs.
Analog computing has emerged as a promising candidate for real-time and parallel continuous data processing. This paper presents a reciprocal way for realizing asymmetric optical transfer functions (OTFs) in the reflection side of the on-axis processing channels. It is rigorously demonstrated that the presence of Cross-polarization Exciting Normal Polarizabilities (CPENP) of a reciprocal metasurface circumvents the famous challenge of Greens function approach in implementation of on-axis reflective optical signal processing while providing dual computing channels under orthogonal polarizations. Following a comprehensive theoretical discussion and as a proof of concept, an all-dielectric optical metasurface is elaborately designed to exhibit the desired surface polarizabilities, thereby reflecting the first derivative and extracting the edges of images impinging from normal direction. The proposed study offers a flexible design method for on-axis metasurface-based optical signal processing and also, dramatically facilitates the experimental setup required for ultrafast analog computation and image processing.
While perovskite solar cells (PSCs) are now reaching high power conversion efficiencies (PCEs), further performance improvement requires a fine management and an optimization of the light pathway and harvesting in the cells. These go through an accurate understanding, characterization and modelling of the optical processes occurring in these complex, often textured, multi-layered systems. In the present work, we have considered a typical methylammonium lead iodide (MAPI) solar cell built on a fluorine-doped tin oxide (FTO) electrode of high roughness (43 nm RMS). By variable-angle spectroscopic ellipsometry (VASE) of the full PSC device, we have been able to determine the optical constants of all the device layers. We have designed a one-dimensional (1D) optical model of the stacked layers where the rough texture is described as layers of effective-medium index. We have supported the model using data extracted from scanning electron microscopy, diffuse spectroscopy and photovoltaic efficiency measurements. We show that the 1D model, while insufficient to describe scattering by the FTO plate alone, gives an accurate description of the full device optical properties. By comparison with the experimental external quantum efficiency (EQE), we estimate the internal quantum efficiency (IQE) and the effect of the losses related to electron transfer. Based on this work, we finally discuss the optical losses mechanisms and the possible strategies that can be implemented to improve light management within PSC devices and further increase their performances.
Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorbs light in its active (limiting) state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$deg$ away from the normal).
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
