Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLow Threshold Bound State in the Continuum Lasers in Hybrid Lattice Resonance Metasurfaces
102
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Bound states in the continuum (BICs) have attracted much attention in recent years due to the infinite quality factor (Q-factor) resonance and extremely localized field. In this study, BICs have been demonstrated by dielectric metasurfaces with hybrid surface lattice resonance (SLR) in the experiment. By breaking the symmetry of geometry, SLR can be easily switched between BICs and quasi-BICs. Comparing with literature, switching between BICs and quasi-BICs is usually accompanied by wavelength shift. Here, a design rule is proposed to prevent the wavelength shift when the Q-factor is changing. Also, such a design also makes subsequent identification of the laser threshold more credible. Due to the high Q-factor, low threshold laser is one of the intuitive applications of BICs. Utilize the high localized ability of BICs, low threshold BICs laser can be achieved by the dielectric metasurface immersed with Rhodamine 6G. Interestingly, due to the high Q-factor resonance of BICs, the laser signals and images can be observed in almost transparent samples. Not only the BICs laser is demonstrated in the experiment, but also the mechanism of BICs is deeply analyzed. This study can help readers better understand this novel feature of BICs, and provide the way for engineer BICs metasurfaces. The device can provide various applications, including laser, optical sensing, non-linear optics enhancement, and single-photon source.
rate research
Read More
Nonlinear nanostructured surfaces provide a paradigm shift in nonlinear optics with new ways to control and manipulate frequency conversion processes at the nanoscale, also offering novel opportunities for applications in photonics, chemistry, material science, and biosensing. Here, we develop a general approach to employ sharp resonances in metasurfaces originated from the physics of bound states in the continuum for both engineering and enhancing the nonlinear response. We study experimentally the third-harmonic generation from metasurfaces composed of symmetry-broken silicon meta-atoms and reveal that the harmonic generation intensity depends critically on the asymmetry parameter. We employ the concept of the critical coupling of light to the metasurface resonances to uncover the effect of radiative and nonradiative losses on the nonlinear conversion efficiency.
Arrays of metallic particles patterned on a substrate have emerged as a promising design for on-chip plasmonic lasers. In past examples of such devices, the periodic particles provided feedback at a single resonance wavelength, and organic dye molecules were used as the gain material. Here, we introduce a flexible template-based fabrication method that allows a broader design space for Ag particle-array lasers. Instead of dye molecules, we integrate colloidal quantum dots (QDs), which offer better photostability and wavelength tunability. Our fabrication approach also allows us to easily adjust the refractive index of the substrate and the QD-film thickness. Exploiting these capabilities, we demonstrate not only single-wavelength lasing but dual-wavelength lasing via two distinct strategies. First, by using particle arrays with rectangular lattice symmetries, we obtain feedback from two orthogonal directions. The two output wavelengths from this laser can be selected individually using a linear polarizer. Second, by adjusting the QD-film thickness, we use higher-order transverse waveguide modes in the QD film to obtain dual-wavelength lasing at normal and off-normal angles from a symmetric square array. We thus show that our approach offers various design possibilities to tune the laser output.
The partial or complete confinement of waves in an open system is omnipresent in nature and in wave-based materials and technology. Here, we theoretically analyze and experimentally observe the formation of a trapped mode with perfect mode conversion (TMPC) between flexural waves and longitudinal waves, by achieving a quasi-bound state in the continuum (BIC) in an open elastic wave system. The latter allows a quasi-BIC in a semi-infinite background plate when Fano resonance hybridizes flexural and longitudinal waves and balances their radiative decay rates. We demonstrate that when the Fabry-Perot resonance of the longitudinal wave is realized simultaneously, the TMPC formed by the elastic BIC approaches infinite quality factor. Furthermore, we show that quasi-BIC can be tuned continuously to BIC through the critical frequency of mode conversion, which offers the possibility of TMPC with an arbitrarily high quality factor. Our reported concept and physical mechanism open new routes to achieve perfect mode conversion with tunable high quality factor in elastic systems.
Excitonic stimulated emission provides a promising mechanism and route to achieve low-threshold semiconductor lasers for micro-nano optoelectronic integrations. However, excitonic stimulated emission from quantum structure-free semiconductors has rarely been realised at room temperature due to the phase transition between excitonic and electron-hole plasma states. Herein, we show that through trap-state and band-edge engineering, bound exciton states can be stabilised within the hybrid lead bromide perovskite. Under modest pumping conditions, these states enable stimulated emission behaviour that exhibits a low threshold carrier density of only 1.6*1017 cm-3, as well as a high peak gain coefficient of ~1300 cm-1. This is the first time that bound exciton stimulated emission has been realised at room temperature from a quantum structure-free semiconductor. Not only does this open up new research horizons for perovskite materials, but also it has important implications for semiconductor excitonic physics and the development of next-generation optoelectronic applications.
Low-threshold lasing under pulsed optical pumping is demonstrated at room temperature for III-nitride microdisks with InGaN/GaN quantum wells on Si in the blue spectral range. Thresholds in the range of 18 kW/cm2 have been achieved along with narrow linewidths of 0.07 nm and a large peak to background dynamic of 300. We compare this threshold range with the one that can be calculated using a rate equation model. We show that thresholds in the few kW/cm2 range constitute the best that can be achieved with III-nitride quantum wells at room temperature. The sensitivity of lasing on the fabrication process is also discussed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
