Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMultiple spatial and wavelength conversion operations based on a frequency-degenerated intermodal four-wave-mixing process in a graded-index 6-LP few mode fiber
55
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report on the experimental observation of a simultaneous threefold wavelength and spatial conversion process at telecommunication wavelengths taking place in a 6-LP-mode graded-index few-mode fiber. The physical mechanism is based on parallel and phase-matched frequency-degenerated intermodal four-wave mixing (FD-IFWM) phenomena occurring between the fundamental mode and higher-order spatial modes. More precisely, a single high-power frequency-degenerated pump wave is simultaneously injected in the four spatial modes LP01, LP11, LP02 and LP31 of a 1.8-km long graded-index few-mode fiber together with three independent signals in the fundamental mode. By means of three parallel phase-matched FD-IFWM interactions, these initial signals are then simultaneously spatially and frequency converted from the fundamental mode to specific high-order modes. The influence of the differential modal group delay is also investigated and shows that the walk-off between the spatially multiplexed signals significantly limits the bandwidth of the conversion process for telecom applications.
rate research
Read More
We report on the generation of four spatially multiplexed picosecond 40-GHz pulse trains in a km-long 6-LP multimode optical fiber. The principle of operation is based on the parallel nonlinear compression of initial beat-signals into well separated pulse trains owing to intra-modal multiple four-wave mixings. A series of four 40-GHz dual-frequency beatings at different wavelengths are simultaneously injected into the LP01, LP11, LP02 and LP12 modes of a 1.8-km long graded-index few-mode fiber. The combined effects of Kerr nonlinearity and anomalous chromatic dispersion lead to the simultaneous generation of four spatially multiplexed frequency combs which correspond in the temporal domain to the compression of these beat-signals into picosecond pulses. The temporal profiles of the output pulse-trains demultiplexed from each spatial mode show that well-separated picosecond pulses with negligible pedestals are then generated.
We experimentally and theoretically investigate the process of seeded intermodal four-wave mixing in a graded index multimode fiber, pumped in the normal dispersion regime. By using a fiber with a 100 micron core diameter, we generate a parametric sideband in the C band (1530-1565 nm), hence allowing the use of an Erbium-based laser to seed the mixing process. To limit nonlinear coupling between the pump and the seed to low-order fiber modes, the waist diameter of the pump beam is properly adjusted. We observe that the superimposed seed stimulates the generation of new spectral sidebands. A detailed characterization of the spectral and spatial properties of these sidebands shows good agreement with theoretical predictions from the phase-matching conditions. Interestingly, we demonstrate that both the second and the fourth-order dispersions must be included in the phase matching conditions to get better agreement with experimental measurements. Furthermore, temporal measurements performed with a fast photodiode reveal the generation of multiple pulse structures.
Efficient frequency conversion of photons has important applications in optical quantum technology because the frequency range suitable for photon manipulation and communication usually varies widely. Recently, an efficient frequency conversion system using a double-$Lambda$ four-wave mixing (FWM) process based on electromagnetically induced transparency (EIT) has attracted considerable attention because of its potential to achieve a nearly 100% conversion efficiency (CE). To obtain such a high CE, the spontaneous emission loss in this resonant-type FWM system must be suppressed considerably. A simple solution is to arrange the applied laser fields in a backward configuration. However, the phase mismatch due to this configuration can cause a significant decrease in CE. Here, we demonstrate that the phase mismatch can be effectively compensated by introducing the phase shift obtained by two-photon detuning. Under optimal conditions, we observe a wavelength conversion from 780 to 795 nm with a maximum CE of 91.2(6)% by using this backward FWM system at an optical depth of 130 in cold rubidium atoms. The current work represents an important step toward achieving low-loss, high-fidelity EIT-based quantum frequency conversion.
We report the experimental observation of Kerr beam self-cleaning in a graded-index multimode fiber, leading to output beam profiles different from a bell shape, close to the $LP_{01}$ mode. For specific coupling conditions, nonlinear coupling among the guided modes can reshape the output speckle pattern generated by a pulsed beam into the low order $LP_{11}$ mode. This was observed in a few meters long multimode fiber with 750 ps pulses at 1064 nm in the normal dispersion regime. The power threshold for $LP_{11}$ mode self-cleaning was about three times larger than that required for Kerr nonlinear self- cleaning into the $LP_{01}$ mode.
Solitons are non-dispersing localized waves that occur in diverse physical settings. A variety of optical solitons have been observed, b
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
