Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMicrostructure Role in Permanent Magnet Eddy Current Losses
146
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The impact of granular microstructure in permanent magnets on eddy current losses are investigated. A numerical homogenization procedure for electrical conductivity is defined. Then, an approximated simple analytical model for the homogenized conductivity able to capture the main features of the geometrical and material dependences is derived. Finally eddy current losses analytical calculations are given, and the two asymptotic expressions for losses in the stationary conduction limit and advanced skin effect limit are derived and discussed.
rate research
Read More
High gradient quadrupoles are necessary for different applications such as laser plasma acceleration, colliders, and diffraction limited light sources. Permanent magnet quadrupoles provide a higher field strength and compactness than conventional electro-magnets. An original design of permanent magnet based quadrupole (so-called QUAPEVA), composed of a Halbach ring placed in the center with a bore radius of 6 mm and surrounded by four permanent magnet cylinders capable of providing a gradient of 210 T/m, is presented. The design of the QUAPEVAs, including magnetic simulation modeling, and mechanical issues are reported. Magnetic measurements of seven systems of different lengths are presented and confirmed the theoretical expectations. The variation of the magnetic center while changing the gradient strength is +/- 10 micrometer. A triplet of three QUAPEVA magnets are used to focus a beam with large energy spread and high divergence that is generated by Laser Plasma Acceleration source for a free electron laser demonstration.
This work is motivated by the monitoring of conductive clogging deposits in steam generator at the level of support plates. One would like to use monoaxial coils measurements to obtain estimates on the clogging volume. We propose a 3D shape optimization technique based on simplified parametrization of the geometry adapted to the measurement nature and resolution. The direct problem is modeled by the eddy current approximation of time-harmonic Maxwells equations in the low frequency regime. A potential formulation is adopted in order to easily handle the complex topology of the industrial problem setting. We first characterize the shape derivatives of the deposit impedance signal using an adjoint field technique. For the inversion procedure, the direct and adjoint problems have to be solved for each coil vertical position which is excessively time and memory consuming. To overcome this difficulty, we propose and discuss a steepest descent method based on a fixed and invariant triangulation. Numerical experiments are presented to illustrate the convergence and the efficiency of the method.
Superconductors with persistent zero-resistance currents serve as permanent magnets for high-field applications requiring a strong and stable magnetic field, such as magnetic resonance imaging (MRI). The recent global helium shortage has quickened research into high-temperature superconductors (HTSs) materials that can be used without conventional liquid-helium cooling to 4.2 K. Herein, we demonstrate that 40-K-class metallic HTS magnesium diboride (MgB2) makes an excellent permanent bulk magnet, maintaining 3 T at 20 K for 1 week with an extremely high stability (<0.1 ppm/h). The magnetic field trapped in this magnet is uniformly distributed, as for single-crystalline neodymium-iron-boron. Magnetic hysteresis loop of the MgB2 permanent bulk magnet was detrmined. Because MgB2 is a simple-binary-line compound that does not contain rare-earth metals, polycrystalline bulk material can be industrially fabricated at low cost and with high yield to serve as strong magnets that are compatible with conventional compact cryocoolers, making MgB2 bulks promising for the next generation of Tesla-class permanent-magnet applications.
There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the impact of interfacial properties on the spin injection efficiency systematically. We show that both, spin injection efficiency at the interface as well as the spin diffusion length can be tuned sensitively by the interfacial molecular structure and side chain substitution of the molecule.
We describe experiments on trapping of atoms in microscopic magneto-optical traps on an optically transparent permanent-magnet atom chip. The chip is made of magnetically hard ferrite-garnet material deposited on a dielectric substrate. The confining magnetic fields are produced by miniature magnetized patterns recorded in the film by magneto-optical techniques. We trap Rb atoms on these structures by applying three crossed pairs of counter-propagating laser beams in the conventional magneto-optical trapping (MOT) geometry. We demonstrate the flexibility of the concept in creation and in-situ modification of the trapping geometries through several experiments.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
