Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userExcitation of negative energy surface magnetohydrodynamic waves in an incompressible cylindrical plasma
116
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Negative energy wave phenomena may appear in shear flows in the presence of a wave decay mechanism and external energy supply. We study the appearance of negative energy surface waves in a plasma cylinder in the incompressible limit. The cylinder is surrounded by an axial magnetic field and by a plasma of different density. Considering flow inside and viscosity outside the flux tube, we derive dispersion relations, and obtain analytical solutions for the phase speed and growth rate (increment) of the waves. It is found that the critical speed shear for the occurrence of the dissipative instability associated with negative energy waves (NEWs) and the threshold of Kelvin--Helmholtz instability (KHI) depend on the axial wavelength. The critical shear for the appearance of sausage NEW is lowest for the longest axial wavelengths, while for kink waves the minimum value of the critical shear is reached for the axial wavelength comparable to the diameter of the cylinder. The range between the critical speed of the dissipative instability and the KHI threshold is shown to depend on the difference of the Alfv{e}n speeds inside and outside of the cylinder. For all axial wavenumbers, NEW appears for the shear flow speeds lower than the KHI threshold. It is easier to excite NEW in an underdense cylinder than in an overdense one. The negative energy surface waves can be effectively generated for azimuthal number $m=0$ with a large axial wave number and for higher modes ($m>0$) with a small axial wave number.
rate research
Read More
A possible solution to the unexplained high intensity hard x-ray (HXR) emission observable during solar flares was investigated via 3D fully relativistic, electromagnetic particle-in-cell (PIC) simulations with realistic ion to electron mass ratio. A beam of accelerated electrons was injected into a magnetised, Maxwellian, homogeneous and inhomogeneous background plasma. The electron distribution function was unstable to the beam-plasma instability and was shown to generate Langmuir waves, while relaxing to plateau formation. In order to estimate the role of the background density gradient on an unbound (infinite spatial extent) beam, three different scenarios were investigated: a) a uniform density background; b) a weak density gradient, n_R/n_L=3; c) a strong gradient case, n_R/n_L=10, where n_R and n_L denote background electron densities on the left and right edges of the simulation box respectively. The strong gradient case produced the largest fraction of electrons beyond 15 v_th. Further, two cases (uniform and strong gradient background) with spatially localized beam injections were performed aiming to show drifts of the generated Langmuir wave wavenumbers, as suggested in previous studies. For the strong gradient case, the Langmuir wave power is shown to drift to smaller wavenumbers, as found in previous quasi-linear simulations.
It has been suggested that the Z-mode instability driven by energetic electrons with a loss-cone type velocity distribution is one candidate process behind the continuum and zebra pattern of solar type-IV radio bursts. Both the temperature of background plasma ($T_0$) and the energy of energetic electrons ($v_e$) are considered to be important to the variation of the maximum growth rate ($gamma_{max}$). Here we present a detailed parameter study on the effect of $T_0$ and $v_e$, within a regime of the frequency ratio ($10 leq frac{omega_{pe}}{Omega_{ce}} leq 30$). In addition to $gamma_{max}$, we also analyze the effect on the corresponding wave frequency ($omega^r_{max}$) and propagation angle ($theta_{max}$). We find that (1) $gamma_{max}$ in-general decreases with increasing $v_e$, while its variation with $T_0$ is more complex depending on the exact value of $v_e$; (2) with increasing $T_0$ and $v_e$, $omega^r_{max}$ presents step-wise profiles with jumps separated by gradual or very-weak variations, and due to the warm-plasma effect on the wave dispersion relation $omega^r_{max}$ can vary within the hybrid band (the harmonic band containing the upper hybrid frequency) and the band higher; (3) the propagation is either perpendicular or quasi-perpendicular, and $theta_{max}$ presents variations in line with those of $omega^r_{max}$, as constrained by the resonance condition. We also examine the profiles of $gamma_{max}$ with $frac{omega_{pe}}{Omega_{ce}}$ for different combinations of $T_0$ and $v_e$ to clarify some earlier calculations which show inconsistent results.
We present estimates of the turbulent energy cascade rate, derived from a Hall-MHD third-order law. We compute the contribution from the Hall term and the MHD term to the energy flux. We use MMS data accumulated in the magnetosheath and the solar wind, and compare the results with previously established simulation results. We find that in observation, the MHD contribution is dominant at inertial scales, as in the simulations, but the Hall term becomes significant in observations at larger scales than in the simulations. Possible reasons are offered for this unanticipated result.
The processes of the coronal plasma heating and cooling were previously shown to significantly affect the dynamics of slow magnetoacoustic (MA) waves, causing amplification or attenuation, and also dispersion. However, the entropy mode is also excited in such a thermodynamically active plasma and is affected by the heating/cooling misbalance too. This mode is usually associated with the phenomenon of coronal rain and formation of prominences. Unlike the adiabatic plasmas, the properties and evolution of slow MA and entropy waves in continuously heated and cooling plasmas get mixed. Different regimes of the misbalance lead to a variety of scenarios for the initial perturbation to evolve. In order to describe properties and evolution of slow MA and entropy waves in various regimes of the misbalance, we obtained an exact analytical solution of the linear evolutionary equation. Using the characteristic timescales and the obtained exact solution, we identified regimes with qualitatively different behaviour of slow MA and entropy modes. For some of those regimes, the spatio-temporal evolution of the initial Gaussian pulse is shown. In particular, it is shown that slow MA modes may have a range of non-propagating harmonics. In this regime, perturbations caused by slow MA and entropy modes in a low-$beta$ plasma would look identically in observations, as non-propagating disturbances of the plasma density (and temperature) either growing or decaying with time. We also showed that the partition of the initial energy between slow MA and entropy modes depends on the properties of the heating and cooling processes involved. The obtained exact analytical solution could be further applied to the interpretation of observations and results of numerical modelling of slow MA waves in the corona and the formation and evolution of coronal rain.
Previous works indicate that the frequency ratio of second and first harmonics of kink oscillations has tendency towards 3 in the case of prominence threads. We aim to study the magnetohydrodynamic oscillations of longitudinally inhomogeneous prominence threads and to shed light on the problem of frequency ratio. Classical Sturm--Liouville problem is used for the threads with longitudinally inhomogeneous plasma density. We show that the spatial variation of total pressure perturbations along the thread is governed by the stationary Schr{o}dinger equation, where the longitudinal inhomogeneity of plasma density stands for the potential energy. Consequently, the equation has bounded solutions in terms of Hermite polynomials. Boundary conditions at the thread surface lead to transcendental dispersion equation with Bessel functions. Thin flux tube approximation of the dispersion equation shows that the frequency of kink waves is proportional to the expression alpha(2n+1), where alpha is the density inhomogeneity parameter and n is the longitudinal mode number. Consequently, the ratio of the frequencies of second and first harmonics tends to 3 in prominence threads. Numerical solution of the dispersion equation shows that the ratio only slightly decreases for thicker tubes in the case of smaller longitudinal inhomogeneity of external density, therefore the thin flux tube limit is a good approximation for prominence oscillations. However, stronger longitudinal inhomogeneity of external density may lead to the significant shift of frequency ratio for wider tubes and therefore the thin tube approximation may fail. The tendency of frequency ratio of second and first harmonics towards 3 in prominence threads is explained by the analogy of the oscillations with quantum harmonic oscillator, where the density inhomogeneity of the threads plays a role of potential energy.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
