Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAstrometric precision of centering algorithms based on model fitting
55
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We provide a basis to select the optimal algorithm according to the specific observational conditions in ground-based astrometry, and clarify the loss of precision in the case of not achieving optimum. The principle of the centering algorithms based on model fitting is analyzed by the method of maximum likelihood. The effective point spread function (ePSF) algorithm, which can construct an accurate model to fit the star image, and the most widely used Gaussian centering algorithm are chosen to investigate the effect of different factors on centering precision. A series of synthetic star images with different backgrounds, full width at half maximums (FWHMs) and profiles are processed by these algorithms. The profiles include the actual profiles extracted from observations and the theoretical profiles, the spatial variation of the PSF across the detector is also taken into account. Each algorithm is applied to the observations obtained from Yunnan observatory to verify the simulation results. The simulations show that ePSF fitting is obviously more precise than Gaussian fitting for a Gaussian profile star with high signal-to-noise ratio (SNR). When the center of star profile becomes sharp, or the SNR of the star decreases, the advantage of ePSF fitting will gradually decrease. The high precision of ePSF fitting is due to its appropriate weight in the weighted least squares fitting. However, a similar method using the same weight, the weighted Gaussian fitting, turned out to be poor under some conditions. The reduction results of practical observations show good agree with the simulations. For a frame of CCD image with enough stars to construct accurate ePSFs, ePSF fitting can approach the Cramer-Rao (CR) bound. Other centering algorithms may achieve the same precision under suitable conditions, but will show poor precision when not used properly.
rate research
Read More
A general purpose fitting model for one-dimensional astrometric signals is developed, building on a maximum likelihood framework, and its performance is evaluated by simulation over a set of realistic image instances. The fit quality is analysed as a function of the number of terms used for signal expansion, and of astrometric error, rather than RMS discrepancy with respect to the input signal. The tuning of the function basis to the statistical characteristics of the signal ensemble is discussed. The fit sensitivity to a priori knowledge of the source spectra is addressed. Some implications of the current results on calibration and data reduction aspects are discussed, in particular with respect to Gaia.
A tool for representation of the one-dimensional astrometric signal of Gaia is described and investigated in terms of fit discrepancy and astrometric performance with respect to number of parameters required. The proposed basis function is based on the aberration free response of the ideal telescope and its derivatives, weighted by the source spectral distribution. The influence of relative position of the detector pixel array with respect to the optical image is analysed, as well as the variation induced by the source spectral emission. The number of parameters required for micro-arcsec level consistency of the reconstructed function with the detected signal is found to be 11. Some considerations are devoted to the issue of calibration of the instrument response representation, taking into account the relevant aspects of source spectrum and focal plane sampling. Additional investigations and other applications are also suggested.
Orbital monitoring of exoplanetary and stellar systems is fundamental for analysing their architecture, dynamical stability and evolution, and mechanisms of formation. Current high-contrast extreme-adaptive optics imagers like SPHERE, GPI, and SCExAO+CHARIS explore the population of giant exoplanets and brown dwarf and stellar companions beyond typically 10 au, covering generally a small fraction of the orbit (<20%) leading to degeneracies and biases in the orbital parameters. Precise and robust measurements over time of the position of the companions are critical, which require good knowledge of the instrumental limitations and dedicated observing strategies. The homogeneous dedicated calibration strategy for astrometry implemented for SPHERE has facilitated high-precision studies by its users since its start of operation in 2014. As the precision of exoplanet imaging instruments is now reaching milliarcseconds and is expected to improve with the upcoming facilities, we initiated a community effort, triggered by the SPHERE experience, to share lessons learned for high-precision astrometry in direct imaging. A homogeneous strategy would strongly benefit the VLT community, in synergy with VLTI instruments like GRAVITY/GRAVITY+, future instruments like ERIS and MAVIS, and in preparation for the exploitation of the ELTs first instruments MICADO, HARMONI, and METIS.
We present the Exoplanet Simple Orbit Fitting Toolbox (ExoSOFT), a new, open-source suite to fit the orbital elements of planetary or stellar mass companions to any combination of radial velocity and astrometric data. To explore the parameter space of Keplerian models, ExoSOFT may be operated with its own multi-stage sampling approach, or interfaced with third-party tools such as emcee. In addition, ExoSOFT is packaged with a collection of post-processing tools to analyze and summarize the results. Although only a few systems have been observed with both the radial velocity and direct imaging techniques, this number will increase thanks to upcoming spacecraft and ground based surveys. Providing both forms of data enables simultaneous fitting that can help break degeneracies in the orbital elements that arise when only one data type is available. The dynamical mass estimates this approach can produce are important when investigating the formation mechanisms and subsequent evolution of substellar companions. ExoSOFT was verified through fitting to artificial data and was implemented using the Python and Cython programming languages; available for public download at https://github.com/kylemede/ExoSOFT under the GNU General Public License v3.
High precision astrometric Space Very Long Baseline Interferometry (S-VLBI) at the low end of the conventional frequency range, i.e. 20cm, is a requirement for a number of high priority science goals. These are headlined by obtaining trigonometric parallax distances to pulsars in Pulsar--Black Hole pairs and OH masers anywhere in the Milky Way Galaxy and the Magellanic Clouds. We propose a solution for the most difficult technical problems in S-VLBI by the MultiView approach where multiple sources, separated by several degrees on the sky, are observed simultaneously. We simulated a number of challenging S-VLBI configurations, with orbit errors up to 8m in size and with ionospheric atmospheres consistant with poor conditions. In these simulations we performed MultiView analysis to achieve the required science goals. This approach removes the need for beam switching requiring a Control Moment Gyro, and the space and ground infrastructure required for high quality orbit reconstruction of a space-based radio telescope. This will dramatically reduce the complexity of S-VLBI missions which implement the phase-referencing technique.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
