Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAdiabatic Mode Transformation in Width-graded Nano-gratings: Enabling Multiwavelength Light Localization
37
0
0.0
(
0
)
Authors
Moein Shayegannia
Ask ChatGPT about the research
No Arabic abstract
We delineate the four principal surface plasmon polariton coupling and interaction mechanisms in subwavelength gratings, and demonstrate their significant roles in shaping the optical response of plasmonic gratings. Within the framework of width-graded metal-insulator-metal nano-gratings, mode confinement and wave guiding result in multiwavelength light localization provided conditions of adiabatic mode transformation are satisfied. The field is enhanced further through fine tuning of the groove-width (w), groove-depth (L) and groove-to-groove-separation (d). By juxtaposing the resonance modes of width-graded and non-graded gratings and defining the adiabaticity condition, we demonstrate the criticality of w and d in achieving adiabatic mode transformation among the grooves. We observe that the resonant wavelength of a graded grating corresponds to the properties of a single groove when the grooves are adiabatically coupled. We show that L plays an important function in defining the span of localized wavelengths. We show that multiwavelength resonant modes with intensity enhancement exceeding 3 orders of magnitude are possible with w < 30nm and 300nm < d < 900nm for a range of fixed values of L. This study presents a novel paradigm of deep-subwavelength adiabatically-coupled width-graded gratings - illustrating its versatility in design, hence its viability for applications ranging from surface enhanced Raman spectroscopy to multispectral imaging.
rate research
Read More
We report the possibility to generate tremendous light-field enhancements within shallow nano-trenches made in a high index dielectric material, because of resonant behaviours reminiscent of what we get with sub-wavelength plasmonic cavities. The high quality factors are explained through a modal analysis and can be tuned with appropriate design rules. The thin dielectric void gratings here simulated could be a relevant alternative to plasmon-based devices for chemical sensing, or could be used as efficient wavelength-selective photo-absorbers by taking weakly absorbing materials.
The transformation media concept based on the form-invariant Maxwells equations under coordinate transformations has opened up new possibilities to manipulate the electromagnetic fields. In this paper we report on applying the finite-embedded coordinate transformation method to design electromagnetic beam modulating devices both in the Cartesian coordinates and in the cylindrical coordinates. By designing the material constitutive tensors of the transformation optical structures through different kinds of coordinate transformations, either the beam width of an incident Gaussian plane wave could be modulated by a slab, or the wave propagating direction of an omni-directional source could be modulated through a cylindrical shell. We present the design procedures and the full wave electromagnetic simulations that clearly confirm the performance of the proposed beam modulating devices.
We investigate a theoretical model for a dynamic Moire grating which is capable of producing slow and stopped light with improved performance when compared with a static Moire grating. A Moire grating superimposes two grating periods which creates a narrow slow light resonance between two band gaps. A Moire grating can be made dynamic by varying its coupling strength in time. By increasing the coupling strength the reduction in group velocity in the slow light resonance can be improved by many orders of magnitude while still maintaining the wide bandwidth of the initial, weak grating. We show that for a pulse propagating through the grating this is a consequence of altering the pulse spectrum and therefore the grating can also perform bandwidth modulation. Finally we present a possible realization of the system via an electro-optic grating by applying a quasi-static electric field to a poled $chi^{(2)}$ nonlinear medium.
A one-dimensional dielectric grating, based on a simple geometry, is proposed and investigated to enhance light absorption in a monolayer graphene exploiting guided mode resonances. Numerical findings reveal that the optimized configuration is able to absorb up to 60% of the impinging light at normal incidence for both TE and TM polarizations resulting in a theoretical enhancement factor of about 26 with respect to the monolayer graphene absorption (about 2.3%). Experimental results confirm this behaviour showing CVD graphene absorbance peaks up to about 40% over narrow bands of few nanometers. The simple and flexible design paves the way for the realization of innovative, scalable and easy-to-fabricate graphene-based optical absorbers.
The optical transmission of resonant guided-mode gratings patterned on suspended silicon nitride thin films and illuminated at normal incidence with a Gaussian beam are investigated both experimentally and theoretically. Effects due to the beam focusing and its finite size are accounted for by a phenomenological coupled mode model whose predictions are found to be in very good agreement with the experimentally measured spectra for various grating structures and beam sizes, and which allow for a detailed analysis of the respective magnitude of these effects. These results are highly relevant for the design and optimization of such suspended structured films which are widely used for photonics, sensing and optomechanics applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
