No Arabic abstract
In-memory computing is an emerging non-von Neumann computing paradigm where certain computational tasks are performed in memory by exploiting the physical attributes of the memory devices. Memristive devices such as phase-change memory (PCM), where information is stored in terms of their conductance levels, are especially well suited for in-memory computing. In particular, memristive devices, when organized in a crossbar configuration can be used to perform matrix-vector multiply operations by exploiting Kirchhoffs circuit laws. To explore the feasibility of such in-memory computing cores in applications such as deep learning as well as for system-level architectural exploration, it is highly desirable to develop an accurate hardware emulator that captures the key physical attributes of the memristive devices. Here, we present one such emulator for PCM and experimentally validate it using measurements from a PCM prototype chip. Moreover, we present an application of the emulator for neural network inference where our emulator can capture the conductance evolution of approximately 400,000 PCM devices remarkably well.
The rapidly expanding hardware-intrinsic security primitives are aimed at addressing significant security challenges of a massively interconnected world in the age of information technology. The main idea of such primitives is to employ instance-specific process-induced variations in electronic hardware as a source of cryptographic data. Among the emergent technologies, memristive devices provide unique opportunities for security applications due to the underlying stochasticity in their operation. Herein, we report a prototype of a robust, dense, and reconfigurable physical unclonable function primitives based on the three-dimensional passive metal-oxide memristive crossbar circuits, by making positive use of process-induced variations in the devices nonlinear I-Vs and their analog tuning. We first characterize security metrics for a basic building block of the security primitives based on a two layer stack with monolithically integrated 10x10 250-nm half-pitch memristive crossbar circuits. The experimental results show that the average uniformity and diffusivity, measured on a random sample of 6,000 64-bit responses, out of ~697,000 total, is close to ideal 50% with 5% standard deviation for both metrics. The uniqueness, which was evaluated on a smaller sample by readjusting conductances of crosspoint devices within the same crossbar, is also close to the ideal 50% +/- 1%, while the smallest bit error rate, i.e. reciprocal of reliability, measured over 30-day window under +/-20% power supply variations, was ~ 1.5% +/- 1%. We then utilize multiple instances of the basic block to demonstrate physically unclonable functional primitive with 10-bit hidden challenge generation that encodes more than 10^19 challenge response pairs and has comparable uniformity, diffusiveness, and bit error rate.
For decades, advances in electronics were directly driven by the scaling of CMOS transistors according to Moores law. However, both the CMOS scaling and the classical computer architecture are approaching fundamental and practical limits, and new computing architectures based on emerging devices, such as resistive random-access memory (RRAM) devices, are expected to sustain the exponential growth of computing capability. Here we propose a novel memory-centric, reconfigurable, general purpose computing platform that is capable of handling the explosive amount of data in a fast and energy-efficient manner. The proposed computing architecture is based on a uniform, physical, resistive, memory-centric fabric that can be optimally reconfigured and utilized to perform different computing and data storage tasks in a massively parallel approach. The system can be tailored to achieve maximal energy efficiency based on the data flow by dynamically allocating the basic computing fabric for storage, arithmetic, and analog computing including neuromorphic computing tasks.
The volume, veracity, variability, and velocity of data produced from the ever-increasing network of sensors connected to Internet pose challenges for power management, scalability, and sustainability of cloud computing infrastructure. Increasing the data processing capability of edge computing devices at lower power requirements can reduce several overheads for cloud computing solutions. This paper provides the review of neuromorphic CMOS-memristive architectures that can be integrated into edge computing devices. We discuss why the neuromorphic architectures are useful for edge devices and show the advantages, drawbacks and open problems in the field of neuro-memristive circuits for edge computing.
Hyperdimensional Computing (HDC) is an emerging computational framework that mimics important brain functions by operating over high-dimensional vectors, called hypervectors (HVs). In-memory computing implementations of HDC are desirable since they can significantly reduce data transfer overheads. All existing in-memory HDC platforms consider binary HVs where each dimension is represented with a single bit. However, utilizing multi-bit HVs allows HDC to achieve acceptable accuracies in lower dimensions which in turn leads to higher energy efficiencies. Thus, we propose a highly accurate and efficient multi-bit in-memory HDC inference platform called MIMHD. MIMHD supports multi-bit operations using ferroelectric field-effect transistor (FeFET) crossbar arrays for multiply-and-add and FeFET multi-bit content-addressable memories for associative search. We also introduce a novel hardware-aware retraining framework (HWART) that trains the HDC model to learn to work with MIMHD. For six popular datasets and 4000 dimension HVs, MIMHD using 3-bit (2-bit) precision HVs achieves (i) average accuracies of 92.6% (88.9%) which is 8.5% (4.8%) higher than binary implementations; (ii) 84.1x (78.6x) energy improvement over a GPU, and (iii) 38.4x (34.3x) speedup over a GPU, respectively. The 3-bit $times$ is 4.3x and 13x faster and more energy-efficient than binary HDC accelerators while achieving similar accuracies.
There is widespread interest in emerging technologies, especially resistive crossbars for accelerating Deep Neural Networks (DNNs). Resistive crossbars offer a highly-parallel and efficient matrix-vector-multiplication (MVM) operation. MVM being the most dominant operation in DNNs makes crossbars ideally suited. However, various sources of device and circuit non-idealities lead to errors in the MVM output, thereby reducing DNN accuracy. Towards that end, we propose crossbar re-mapping strategies to mitigate line-resistance induced accuracy degradation in DNNs, without having to re-train the learned weights, unlike most prior works. Line-resistances degrade the voltage levels along the crossbar columns, thereby inducing more errors at the columns away from the drivers. We rank the DNN weights and kernels based on a sensitivity analysis, and re-arrange the columns such that the most sensitive kernels are mapped closer to the drivers, thereby minimizing the impact of errors on the overall accuracy. We propose two algorithms $-$ static remapping strategy (SRS) and dynamic remapping strategy (DRS), to optimize the crossbar re-arrangement of a pre-trained DNN. We demonstrate the benefits of our approach on a standard VGG16 network trained using CIFAR10 dataset. Our results show that SRS and DRS limit the accuracy degradation to 2.9% and 2.1%, respectively, compared to a 5.6% drop from an as it is mapping of weights and kernels to crossbars. We believe this work brings an additional aspect for optimization, which can be used in tandem with existing mitigation techniques, such as in-situ compensation, technology aware training and re-training approaches, to enhance system performance.