Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA CRC-aided Hybrid Decoding for Turbo Codes
104
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Turbo codes and CRC codes are usually decoded separately according to the serially concatenated inner codes and outer codes respectively. In this letter, we propose a hybrid decoding algorithm of turbo-CRC codes, where the outer codes, CRC codes, are not used for error detection but as an assistance to improve the error correction performance. Two independent iterative decoding and reliability based decoding are carried out in a hybrid schedule, which can efficiently decode the two different codes as an entire codeword. By introducing an efficient error detecting method based on normalized Euclidean distance without CRC check, significant gain can be obtained by using the hybrid decoding method without loss of the error detection ability.
rate research
Read More
As the first error correction codes provably achieving the symmetric capacity of binary-input discrete memory-less channels (B-DMCs), polar codes have been recently chosen by 3GPP for eMBB control channel. Among existing algorithms, CRC-aided successive cancellation list (CA-SCL) decoding is favorable due to its good performance, where CRC is placed at the end of the decoding and helps to eliminate the invalid candidates before final selection. However, the good performance is obtained with a complexity increase that is linear in list size $L$. In this paper, the tailored CRC-aided SCL (TCA-SCL) decoding is proposed to balance performance and complexity. Analysis on how to choose the proper CRC for a given segment is proposed with the help of emph{virtual transform} and emph{virtual length}. For further performance improvement, hybrid automatic repeat request (HARQ) scheme is incorporated. Numerical results have shown that, with the similar complexity as the state-of-the-art, the proposed TCA-SCL and HARQ-TCA-SCL schemes achieve $0.1$ dB and $0.25$ dB performance gain at frame error rate $textrm{FER}=10^{-2}$, respectively. Finally, an efficient TCA-SCL decoder is implemented with FPGA demonstrating its advantages over CA-SCL decoder.
In this paper, we propose a turbo receiver for joint activity detection and data decoding in grant-free massive random access, which iterates between a detector and a belief propagation (BP)-based channel decoder. Specifically, responsible for user activity detection, channel estimation, and soft data symbol detection, the detector is developed based on a bilinear inference problem that exploits the common sparsity pattern in the received pilot and data signals. The bilinear generalized approximate message passing (BiG-AMP) algorithm is adopted to solve the problem using probabilities of the transmitted data symbols estimated by the channel decoder as prior knowledge. In addition, extrinsic information is derived from the detector to improve the channel decoding accuracy of the decoder. Simulation results show significant improvements achieved by the proposed turbo receiver compared with conventional designs.
In this letter, we explore the performance limits of short polar codes and find that the maximum likelihood (ML) performance of a simple CRC-polar concatenated scheme can approach the finite blocklength capacity. Then, in order to approach the ML performance with a low average complexity, a CRC-aided hybrid decoding (CA-HD) algorithm is proposed and its decoding process is divided into two steps. In the first step, the received sequence is decoded by the adaptive successive cancellation list (ADSCL) decoding. In the second step, CRC-aided sphere decoding with a reasonable initial radius is used to decode the received sequence. To obtain the reasonable radius, the CRC bits of the survival paths in ADSCL are recalculated and the minimum Euclidean distance between the survival path and the received sequence is chosen as the initial radius. The simulation results show that CA-HD can achieve within about $0.025$dB of the finite blocklength capacity at the block error ratio $10^{-3}$ with code length $128$ and code rate $1/2$.
This paper identifies convolutional codes (CCs) used in conjunction with a CC-specific cyclic redundancy check (CRC) code as a promising paradigm for short blocklength codes. The resulting CRC-CC concatenated code naturally permits the use of the serial list Viterbi decoding (SLVD) to achieve maximum-likelihood decoding. The CC of interest is of rate-$1/omega$ and is either zero-terminated (ZT) or tail-biting (TB). For CRC-CC concatenated code designs, we show how to find the optimal CRC polynomial for a given ZTCC or TBCC. Our complexity analysis reveals that SLVD decoding complexity is a function of the terminating list rank, which converges to one at high SNR. This behavior allows the performance gains of SLVD to be achieved with a small increase in average complexity at the SNR operating point of interest. With a sufficiently large CC constraint length, the performance of CRC-CC concatenated code under SLVD approaches the random-coding union (RCU) bound as the CRC size is increased while average decoding complexity does not increase significantly. TB encoding further reduces the backoff from the RCU bound by avoiding the termination overhead. As a result, several CRC-TBCC codes outperform the RCU bound at moderate SNR values while permitting decoding with relatively low complexity.
Present-day communication systems routinely use codes that approach the channel capacity when coupled with a computationally efficient decoder. However, the decoder is typically designed for the Gaussian noise channel and is known to be sub-optimal for non-Gaussian noise distribution. Deep learning methods offer a new approach for designing decoders that can be trained and tailored for arbitrary channel statistics. We focus on Turbo codes and propose DeepTurbo, a novel deep learning based architecture for Turbo decoding. The standard Turbo decoder (Turbo) iteratively applies the Bahl-Cocke-Jelinek-Raviv (BCJR) algorithm with an interleaver in the middle. A neural architecture for Turbo decoding termed (NeuralBCJR), was proposed recently. There, the key idea is to create a module that imitates the BCJR algorithm using supervised learning, and to use the interleaver architecture along with this module, which is then fine-tuned using end-to-end training. However, knowledge of the BCJR algorithm is required to design such an architecture, which also constrains the resulting learned decoder. Here we remedy this requirement and propose a fully end-to-end trained neural decoder - Deep Turbo Decoder (DeepTurbo). With novel learnable decoder structure and training methodology, DeepTurbo reveals superior performance under both AWGN and non-AWGN settings as compared to the other two decoders - Turbo and NeuralBCJR. Furthermore, among all the three, DeepTurbo exhibits the lowest error floor.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
