Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTowards Optimal Kinetic Energy Harvesting for the Batteryless IoT
103
0
0.0
(
0
)
Added by
Sara Khalifa
Publication date
2020
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Traditional Internet of Things (IoT) sensors rely on batteries that need to be replaced or recharged frequently which impedes their pervasive deployment. A promising alternative is to employ energy harvesters that convert the environmental energy into electrical energy. Kinetic Energy Harvesting (KEH) converts the ambient motion/vibration energy into electrical energy to power the IoT sensor nodes. However, most previous works employ KEH without dynamically tracking the optimal operating point of the transducer for maximum power output. In this paper, we systematically analyse the relation between the operating point of the transducer and the corresponding energy yield. To this end, we explore the voltage-current characteristics of the KEH transducer to find its Maximum Power Point (MPP). We show how this operating point can be approximated in a practical energy harvesting circuit. We design two hardware circuit prototypes to evaluate the performance of the proposed mechanism and analyse the harvested energy using a precise load shaker under a wide set of controlled conditions typically found in human-centric applications. We analyse the dynamic current-voltage characteristics and specify the relation between the MPP sampling rate and harvesting efficiency which outlines the need for dynamic MPP tracking. The results show that the proposed energy harvesting mechanism outperforms the conventional method in terms of generated power and offers at least one order of magnitude higher power than the latter.
rate research
Read More
Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work aims to provide a novel analysis of the ergodic secrecy capacity of a SWIPT system is provided for Rician and Nakagami-m faded communication links. For a realistic evaluation of the system, the imperfections of channel estimations for different receiver designs of the SWIPT-based IoT systems have been taken into account. Subsequently, the closedform expressions of the ergodic secrecy capacities for the considered scenario are provided and, then, validated through extensive simulations. The results indicate that an error ceiling appears due to imperfect channel estimation at high values of signal-to-noise ratio (SNR). More importantly, the secrecy capacity under different channel conditions stops increasing beyond a certain limit, despite an increase of the main link SNR. The in-depth analysis of secrecy-energy trade-off has also been performed and a comparison has been provided for imperfect and perfect channel estimation cases. As part of the continuous evolution of IoT networks, the results provided in this work can help in identifying the secrecy limits of IoT networks in the presence of multiple eavesdroppers.
Conventional systems for motion context detection rely on batteries to provide the energy required for sampling a motion sensor. Batteries, however, have limited capacity and, once depleted, have to be replaced or recharged. Kinetic Energy Harvesting (KEH) allows to convert ambient motion and vibration into usable electricity and can enable batteryless, maintenance free operation of motion sensors. The signal from a KEH transducer correlates with the underlying motion and may thus directly be used for context detection, saving space, cost and energy by omitting the accelerometer. Previous work uses the open circuit or the capacitor voltage for sensing without using the harvested energy to power a load. In this paper, we propose to use other sensing points in the KEH circuit that offer information rich sensing signals while the energy from the harvester is used to power a load. We systematically analyse multiple sensing signals available in different KEH architectures and compare their performance in a transport mode detection case study. To this end, we develop four hardware prototypes, conduct an extensive measurement campaign and use the data to train and evaluate different classifiers. We show that sensing the harvesting current signal from a transducer can be energy positive, delivering up to ten times as much power as it consumes for signal acquisition, while offering comparable detection accuracy to the accelerometer signal for most of the considered transport modes.
Analog-to-digital converters (ADCs) allow physical signals to be processed using digital hardware. The power consumed in conversion grows with the sampling rate and quantization resolution, imposing a major challenge in power-limited systems. A common ADC architecture is based on sample-and-hold (S/H) circuits, where the analog signal is being tracked only for a fraction of the sampling period. In this paper, we propose the concept of eSampling ADCs, which harvest energy from the analog signal during the time periods where the signal is not being tracked. This harvested energy can be used to supplement the ADC itself, paving the way to the possibility of zero-power consumption and power-saving ADCs. We analyze the tradeoff between the ability to recover the sampled signal and the energy harvested, and provide guidelines for setting the sampling rate in the light of accuracy and energy constraints. Our analysis indicates that eSampling ADCs operating with up to 12 bits per sample can acquire bandlimited analog signals such that they can be perfectly recovered without requiring power from the external source. Furthermore, our theoretical results reveal that eSampling ADCs can in fact save power by harvesting more energy than they consume. To verify the feasibility of eSampling ADCs, we present a circuit-level design using standard complementary metal oxide semiconductor (CMOS) 65 nm technology. An eSampling 8-bit ADC which samples at 40 MHZ is designed on a Cadence Virtuoso platform. Our experimental study involving Nyquist rate sampling of bandlimited signals demonstrates that such ADCs are indeed capable of harvesting more energy than that spent during analog-to-digital conversion, without affecting the accuracy.
In this paper, we consider a light fidelity (LiFi)-enabled bidirectional Internet of Things (IoT) communication system, where visible light and infrared light are used in the downlink and uplink, respectively. In order to improve the energy efficiency (EE) of the bidirectional LiFi-IoT system, non-orthogonal multiple access (NOMA) with a quality-of-service (QoS)-guaranteed optimal power allocation (OPA) strategy is applied to maximize the EE of the system. We derive a closed-form OPA set based on the identification of the optimal decoding orders in both downlink and uplink channels, which can enable low-complexity power allocation. Moreover, we propose an adaptive channel and QoS-based user pairing approach by jointly considering users channel gains and QoS requirements. We further analyze the EE of the bidirectional LiFi-IoT system and the user outage probabilities (UOPs) of both downlink and uplink channels of the system. Extensive analytical and simulation results demonstrate the superiority of NOMA with OPA in comparison to orthogonal multiple access (OMA) and NOMA with typical channel-based power allocation strategies. It is also shown that the proposed adaptive channel and QoS-based user pairing approach greatly outperforms individual channel/QoS-based approaches, especially when users have diverse QoS requirements.
Sensing systems powered by energy harvesting have traditionally been designed to tolerate long periods without energy. As the Internet of Things (IoT) evolves towards a more transient and opportunistic execution paradigm, reducing energy storage costs will be key for its economic and ecologic viability. However, decreasing energy storage in harvesting systems introduces reliability issues. Transducers only produce intermittent energy at low voltage and current levels, making guaranteed task completion a challenge. Existing ad hoc methods overcome this by buffering enough energy either for single tasks, incurring large data-retention overheads, or for one full application cycle, requiring a large energy buffer. We present Julienning: an automated method for optimizing the total energy cost of batteryless applications. Using a custom specification model, developers can describe transient applications as a set of atomically executed kernels with explicit data dependencies. Our optimization flow can partition data- and energy-intensive applications into multiple execution cycles with bounded energy consumption. By leveraging interkernel data dependencies, these energy-bounded execution cycles minimize the number of system activations and nonvolatile data transfers, and thus the total energy overhead. We validate our methodology with two batteryless cameras running energy-intensive machine learning applications. Results demonstrate that compared to ad hoc solutions, our method can reduce the required energy storage by over 94% while only incurring a 0.12% energy overhead.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
