Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new usereSampling: Energy Harvesting ADCs
69
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Analog-to-digital converters (ADCs) allow physical signals to be processed using digital hardware. The power consumed in conversion grows with the sampling rate and quantization resolution, imposing a major challenge in power-limited systems. A common ADC architecture is based on sample-and-hold (S/H) circuits, where the analog signal is being tracked only for a fraction of the sampling period. In this paper, we propose the concept of eSampling ADCs, which harvest energy from the analog signal during the time periods where the signal is not being tracked. This harvested energy can be used to supplement the ADC itself, paving the way to the possibility of zero-power consumption and power-saving ADCs. We analyze the tradeoff between the ability to recover the sampled signal and the energy harvested, and provide guidelines for setting the sampling rate in the light of accuracy and energy constraints. Our analysis indicates that eSampling ADCs operating with up to 12 bits per sample can acquire bandlimited analog signals such that they can be perfectly recovered without requiring power from the external source. Furthermore, our theoretical results reveal that eSampling ADCs can in fact save power by harvesting more energy than they consume. To verify the feasibility of eSampling ADCs, we present a circuit-level design using standard complementary metal oxide semiconductor (CMOS) 65 nm technology. An eSampling 8-bit ADC which samples at 40 MHZ is designed on a Cadence Virtuoso platform. Our experimental study involving Nyquist rate sampling of bandlimited signals demonstrates that such ADCs are indeed capable of harvesting more energy than that spent during analog-to-digital conversion, without affecting the accuracy.
rate research
Read More
Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work aims to provide a novel analysis of the ergodic secrecy capacity of a SWIPT system is provided for Rician and Nakagami-m faded communication links. For a realistic evaluation of the system, the imperfections of channel estimations for different receiver designs of the SWIPT-based IoT systems have been taken into account. Subsequently, the closedform expressions of the ergodic secrecy capacities for the considered scenario are provided and, then, validated through extensive simulations. The results indicate that an error ceiling appears due to imperfect channel estimation at high values of signal-to-noise ratio (SNR). More importantly, the secrecy capacity under different channel conditions stops increasing beyond a certain limit, despite an increase of the main link SNR. The in-depth analysis of secrecy-energy trade-off has also been performed and a comparison has been provided for imperfect and perfect channel estimation cases. As part of the continuous evolution of IoT networks, the results provided in this work can help in identifying the secrecy limits of IoT networks in the presence of multiple eavesdroppers.
This paper considers uplink massive multiple-input multiple-output (MIMO) systems with lowresolution analog-to-digital converters (ADCs) over Rician fading channels. Maximum-ratio-combining (MRC) and zero-forcing (ZF) receivers are considered under the assumption of perfect and imperfect channel state information (CSI). Low-resolution ADCs are considered for both data detection and channel estimation, and the resulting performance is analyzed. Asymptotic approximations of the spectrum efficiency (SE) for large systems are derived based on random matrix theory. With these results, we can provide insights into the trade-offs between the SE and the ADC resolution and study the influence of the Rician K-factors on the performance. It is shown that a large value of K-factors may lead to better performance and alleviate the influence of quantization noise on channel estimation. Moreover, we investigate the power scaling laws for both receivers under imperfect CSI and it shows that when the number of base station (BS) antennas is very large, without loss of SE performance, the transmission power can be scaled by the number of BS antennas for both receivers while the overall performance is limited by the resolution of ADCs. The asymptotic analysis is validated by numerical results. Besides, it is also shown that the SE gap between the two receivers is narrowed down when the K-factor is increased. We also show that ADCs with moderate resolutions lead to better energy efficiency (EE) than that with high-resolution or extremely low-resolution ADCs and using ZF receivers achieve higher EE as compared with the MRC receivers.
This paper provides a first study of utilizing energy harvesting for sustainable machine learning in distributed networks. We consider a distributed learning setup in which a machine learning model is trained over a large number of devices that can harvest energy from the ambient environment, and develop a practical learning framework with theoretical convergence guarantees. We demonstrate through numerical experiments that the proposed framework can significantly outperform energy-agnostic benchmarks. Our framework is scalable, requires only local estimation of the energy statistics, and can be applied to a wide range of distributed training settings, including machine learning in wireless networks, edge computing, and mobile internet of things.
This letter investigates the uplink of a multi-user millimeter wave (mmWave) system, where the base station (BS) is equipped with a massive multiple-input multiple-output (MIMO) array and resolution-adaptive analog-to-digital converters (RADCs). Although employing massive MIMO at the BS can significantly improve the spectral efficiency, it also leads to high hardware complexity and huge power consumption. To overcome these challenges, we seek to jointly optimize the beamspace hybrid combiner and the ADC quantization bits allocation to maximize the system energy efficiency (EE) under some practical constraints. The formulated problem is non-convex due to the non-linear fractional objective function and the non-convex feasible set which is generally intractable. In order to handle these difficulties, we first apply some fractional programming (FP) techniques and introduce auxiliary variables to recast this problem into an equivalent form amenable to optimization. Then, we propose an efficient double-loop iterative algorithm based on the penalty dual decomposition (PDD) and the majorization-minimization (MM) methods to find local stationary solutions. Simulation results reveal significant gain over the baselines.
We study wireless power transmission by an energy source to multiple energy harvesting nodes with the aim to maximize the energy efficiency. The source transmits energy to the nodes using one of the available power levels in each time slot and the nodes transmit information back to the energy source using the harvested energy. The source does not have any channel state information and it only knows whether a received codeword from a given node was successfully decoded or not. With this limited information, the source has to learn the optimal power level that maximizes the energy efficiency of the network. We model the problem as a stochastic Multi-Armed Bandits problem and develop an Upper Confidence Bound based algorithm, which learns the optimal transmit power of the energy source that maximizes the energy efficiency. Numerical results validate the performance guarantees of the proposed algorithm and show significant gains compared to the benchmark schemes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
