Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA PRESTO-based Parallel Pulsar Search Pipeline Used for FAST Drift Scan Data
377
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We developed a pulsar search pipeline based on PRESTO (PulsaR Exploration and Search Toolkit). This pipeline simply runs dedispersion, FFT (Fast Fourier Transformation), and acceleration search in process-level parallel to shorten the processing time. With two parallel strategies, the pipeline can highly shorten the processing time in both the normal searches or acceleration searches. This pipeline was first tested with PMPS (Parkes Multibeam Pulsar Survery) data and discovered two new faint pulsars. Then, it was successfully used in processing the FAST (Five-hundred-meter Aperture Spherical radio Telescope) drift scan data with tens of new pulsar discoveries up to now. The pipeline is only CPU-based and can be easily and quickly deployed in computing nodes for testing purposes or data processes.
rate research
Read More
The Commensal Radio Astronomy Five-hundred-meter Aperture Spherical radio Telescope (FAST) Survey (CRAFTS) utilizes the novel drift-scan commensal survey mode of FAST and can generate billions of pulsar candidate signals. The human experts are not likely to thoroughly examine these signals, and various machine sorting methods are used to aid the classification of the FAST candidates. In this study, we propose a new ensemble classification system for pulsar candidates. This system denotes the further development of the pulsar image-based classification system (PICS), which was used in the Arecibo Telescope pulsar survey, and has been retrained and customized for the FAST drift-scan survey. In this study, we designed a residual network model comprising 15 layers to replace the convolutional neural networks (CNNs) in PICS. The results of this study demonstrate that the new model can sort >96% of real pulsars to belong the top 1% of all candidates and classify >1.6 million candidates per day using a dual--GPU and 24--core computer. This increased speed and efficiency can help to facilitate real-time or quasi-real-time processing of the pulsar-search data stream obtained from CRAFTS. In addition, we have published the labeled FAST data used in this study online, which can aid in the development of new deep learning techniques for performing pulsar searches.
We identify minimal observing cadence requirements that enable photometric astronomical surveys to detect and recognize fast and explosive transients and fast transient features. Observations in two different filters within a short time window (e.g., g-and-i, or r-and-z, within < 0.5 hr) and a repeat of one of those filters with a longer time window (e.g., > 1.5 hr) are desirable for this purpose. Such an observing strategy delivers both the color and light curve evolution of transients on the same night. This allows the identification and initial characterization of fast transient -- or fast features of longer timescale transients -- such as rapidly declining supernovae, kilonovae, and the signatures of SN ejecta interacting with binary companion stars or circumstellar material. Some of these extragalactic transients are intrinsically rare and generally all hard to find, thus upcoming surveys like the Large Synoptic Survey Telescope (LSST) could dramatically improve our understanding of their origin and properties. We colloquially refer to such a strategy implementation for the LSST as the Presto-Color strategy (rapid-color). This cadences minimal requirements allow for overall optimization of a survey for other science goals.
We investigate the 1/f noise of the Five-hundred-meter Aperture Spherical Telescope (FAST) receiver system using drift-scan data from an intensity mapping pilot survey. All the 19 beams have 1/f fluctuations with similar structures. Both the temporal and the 2D power spectrum densities are estimated. The correlations directly seen in the time series data at low frequency $f$ are associated with the sky signal, perhaps due to a coupling between the foreground and the system response. We use Singular Value Decomposition (SVD) to subtract the foreground. By removing the strongest components, the measured 1/f noise power can be reduced significantly. With 20 modes subtraction, the knee frequency of the 1/f noise in a 10 MHz band is reduced to $1.8 times 10^{-3}Hz$, well below the thermal noise over 500-seconds time scale. The 2D power spectra show that the 1/f-type variations are restricted to a small region in the time-frequency space and the correlations in frequency can be suppressed with SVD modes subtraction. The residual 1/f noise after the SVD mode subtraction is uncorrelated in frequency, and a simple noise diode frequency-independent calibration of the receiver gain at 8s interval does not affect the results. The 1/f noise can be important for HI intensity mapping, we estimate that the 1/f noise has a knee frequency $(f_{k}) sim$ 6 $times$ 10$^{-4}$Hz, and time and frequency correlation spectral indices $(alpha) sim 0.65$, $(beta) sim 0.8$ after the SVD subtraction of 30 modes. This can bias the HI power spectrum measurement by 10 percent.
Transient radio phenomena and pulsars are one of six LOFAR Key Science Projects (KSPs). As part of the Transients KSP, the Pulsar Working Group (PWG) has been developing the LOFAR Pulsar Data Pipelines to both study known pulsars as well as search for new ones. The pipelines are being developed for the Blue Gene/P (BG/P) supercomputer and a large Linux cluster in order to utilize enormous amounts of computational capabilities (50Tflops) to process data streams of up to 23TB/hour. The LOFAR pipeline output will be using the Hierarchical Data Format 5 (HDF5) to efficiently store large amounts of numerical data, and to manage complex data encompassing a variety of data types, across distributed storage and processing architectures. We present the LOFAR Known Pulsar Data Pipeline overview, the pulsar beam-formed data format, the status of the pipeline processing as well as our future plans for developing the LOFAR Pulsar Search Pipeline. These LOFAR pipelines and software tools are being developed as the next generation toolset for pulsar processing in Radio Astronomy.
We report the discovery of a highly dispersed fast radio burst, FRB~181123, from an analysis of $sim$1500~hr of drift-scan survey data taken using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The pulse has three distinct emission components, which vary with frequency across our 1.0--1.5~GHz observing band. We measure the peak flux density to be $>0.065$~Jy and the corresponding fluence $>0.2$~Jy~ms. Based on the observed dispersion measure of 1812~cm$^{-3}$~pc, we infer a redshift of $sim 1.9$. From this, we estimate the peak luminosity and isotropic energy to be $lesssim 2times10^{43}$~erg~s$^{-1}$ and $lesssim 2times10^{40}$~erg, respectively. With only one FRB from the survey detected so far, our constraints on the event rate are limited. We derive a 95% confidence lower limit for the event rate of 900 FRBs per day for FRBs with fluences $>0.025$~Jy~ms. We performed follow-up observations of the source with FAST for four hours and have not found a repeated burst. We discuss the implications of this discovery for our understanding of the physical mechanisms of FRBs.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
