Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAn Environmentally Stable and Lead-Free Chalcogenide Perovskite
102
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Organic-inorganic halide perovskites are intrinsically unstable when exposed to moisture and/or light. Additionally, the presence of lead in many perovskites raises toxicity concerns. Herein is reported a thin film of BaZrS3, a lead-free chalcogenide perovskite. Photoluminescence and X-ray diffraction measurements show that BaZrS3 is far more stable than methylammonium lead iodide (MAPbI3) in moist environments. Moisture- and light-induced degradations in BaZrS3 and MAPbI3 are compared by using simulations and calculations based on density functional theory. The simulations reveal drastically slower degradation in BaZrS3 due to two factors - weak interaction with water, and very low rates of ion migration. BaZrS3 photo-detecting devices with photo-responsivity of ~46.5 mA W-1 are also reported. The devices retain ~60% of their initial photo-response after 4 weeks in ambient conditions. Similar MAPbI3 devices degrade rapidly and show ~95% decrease in photo-responsivity in just 4 days. The findings establish the superior stability of BaZrS3 and strengthen the case for its use in optoelectronics. New possibilities for thermoelectric energy conversion using these materials are also demonstrated.
rate research
Read More
Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single-crystal semiconductors, owing to their superior electrical mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge scattering in single crystals and polycrystalline films of CH$_3$NH$_3$PbI$_3$. We show that Frohlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including transistors and modulators.
Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. However, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where the halide systems are either iodine/bromine or bromine/chlorine. UV-visible absorbance data, complemented with photoluminescence spectroscopy, reveals an indirect-bandgap of about 1.96 eV for our nanocrystals. Structural characterization using TEM shows two distinct interatomic distances (2.98 +/- 0.15 Angstroms and 3.43 +/- 0.16 Angstroms) and non-orthogonal lattice angles (approximately 112 degrees) intrinsic to the nanocrystals with a probable triclinic structure revealed by XRD. The presence of chlorine and iodine within the nanocrystals is confirmed by EDS spectroscopy. Finally, light-induced electron paramagnetic resonance (LEPR) spectroscopy with PCBM confirms the photoinduced charge transfer capabilities of the nanocrystals. The formation of such semiconducting lead mixed halide perovskite using azetidinium as the cation suggests a promising subclass of hybrid perovskites holding potential for optoelectronic applications such as in solar cells and photodetectors.
Solution-processed quantum dots (QDs) have a high potential for fabricating low cost, flexible and large-scale solar energy harvesting devices. It has recently been demonstrated that hybrid devices employing a single monovalent cation perovskite solution for PbS QD surface passivation exhibit enhanced photovoltaic performance when compared to standard ligand passivation. Herein we demonstrate that the use of a triple cation Cs0.05(MA0.17FA0.83)0.95Pb(I0.9Br0.1)3 perovskite composition for surface passivation of the quantum dots results in highly efficient solar cells, which maintain 96 % of their initial performance after 1200h shelf storage. We confirm perovskite shell formation around the PbS nanocrystals by a range of spectroscopic techniques as well as high-resolution transmission electron microscopy. We find that the triple cation shell results in a favorable energetic alignment to the core of the dot, resulting in reduced recombination due to charge confinement without limiting transport in the active layer. Consequently, photovoltaic devices fabricated via a single-step film deposition reached a maximum AM1.5G power conversion efficiency of 11.3 % surpassing most previous reports of PbS solar cells employing perovskite passivation.
This paper reviews recent progress in the synthesis of near-infrared (NIR) lead chalcogenide (PbX; PbX=PbS, PbSe, PbTe) quantum dots (QDs) and their applications in NIR QDs based light emitting diodes (NIR-QLEDs). It summarizes the strategies of how to synthesize high efficiency PbX QDs and how to realize high performance PbX based NIR-QLEDs.
Transmission of electrons across a rectangular barrier of IV-VI semiconductor compounds is considered. Conduction electrons arrive at the barrier and are reflected or transmitted through it depending on the relative values of the barrier potential $V_b$ and the electron energy $E$. The theory, in close analogy to the Dirac four component spinors, accounts for the boundary conditions on both sides of the barrier. The calculated transmission coefficient $T_C$ is an oscillatory function of the barrier voltage varying between zero (for full electron reflection) and unity (for full electron transmission). Character of electron wave functions outside and inside the barrier is studied. There exists a total current conservation, i. e. the sum of transmitted and reflected currents is equal to the incoming current. The transmission $T_C$ is studied for various barrier widths and incoming electron energies. Finally, the transmission coefficient $T_C$ is studied as a function of $V_b$ for decreasing energy gaps $E_g$ of different Pb$_{1-x}$Sn$_x$Se compounds in the range of 150 meV $geq E_g geq$ 2 meV. It is indicated that for very small gap values the behaviour of $T_C$ closely resembles that of the chiral electron tunneling by a barrier in monolayer graphene. For $E_g$ =0 (Pb$_{0.81}$Sn$_{0.19}$Se) the coefficient $T_C$ reaches the value of 1 independently of $V_b$.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
