Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRydberg atoms for radio-frequency communications and sensing: atomic receivers for pulsed RF field and phase detection
78
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this article we describe the basic principles of Rydberg atom-based RF sensing and present the development of atomic pulsed RF detection and RF phase sensing establishing capabilities pertinent to applications in communications and sensing. To date advances in Rydberg atom-based RF field sensors have been rooted in a method in which the fundamental physical quantity being detected and measured is the electric field amplitude, $E$, of the incident RF electromagnetic wave. The first part of this paper is focused on using atom-based $E$-field measurement for RF field-sensing and communications applications. With established phase-sensitive technologies, such as synthetic aperture radar (SAR) as well as emerging trends in phased-array antennas in 5G, a method is desired that allows robust, optical retrieval of the RF phase using an enhanced atom-based field sensor. In the second part of this paper we describe our fundamentally new atomic RF sensor and measurement method for the phase of the RF electromagnetic wave that affords all the performance advantages exhibited by the atomic sensor. The presented phase-sensitive RF field detection capability opens atomic RF sensor technology to a wide array of application areas including phase-modulated signal communication systems, radar, and field amplitude and phase mapping for near-field/far-field antenna characterizations.
rate research
Read More
Neutral atom arrays are promising for large-scale quantum computing especially because it is possible to prepare large-scale qubit arrays. An unsolved issue is how to selectively excite one qubit deep in a 3D atomic array to Rydberg states. In this work, we show two methods for this purpose. The first method relies on a well-known result: in a dipole transition between two quantum states driven by two off-resonant fields of equal strength but opposite detunings $pmDelta$, the transition is characterized by two counter-rotating Rabi frequencies $Omega e^{pm iDelta t}$~[or $pmOmega e^{pm iDelta t}$ if the two fields have a $pi$-phase difference]. This pair of detuned fields lead to a time-dependent Rabi frequency $2Omega cos(Delta t)$~[or $2iOmega sin(Delta t)$], so that a full transition between the two levels is recovered. We show that when the two detuned fields are sent in different directions, one atom in a 3D optical lattice can be selectively addressed for Rydberg excitation, and when its state is restored, the state of any nontarget atoms irradiated in the light path is also restored. Moreover, we find that the Rydberg excitation by this method can significantly suppress the fundamental blockade error of a Rydberg gate, paving the way for a high-fidelity entangling gate with commonly used quasi-rectangular pulse that is easily obtained by pulse pickers. Along the way, we find a second method for single-site Rydberg addressing in 3D, where a selected target atom can be excited to Rydberg state while preserving the state of any nontarget atom due to a spin echo sequence. The capability to selectively address a target atom in 3D atomic arrays for Rydberg excitation makes it possible to design large-scale neutral-atom information processor based on Rydberg blockade.
We present a self-calibrating, SI-traceable broadband Rydberg-atom-based radio-frequency (RF) electric field probe (the Rydberg Field Probe or RFP) and measurement instrument (Rydberg Field Measurement System or RFMS). The RFMS comprises an atomic RF field probe (RFP), connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit with a software interface for RF measurement and analysis including real-time field readout and RF waveform visualization. The instrument employs electromagnetically induced transparency (EIT) readout of spectral signatures from RF-sensitive Rydberg states of an atomic vapor for continuous, pulsed, and modulated RF field measurement. The RFP exploits resonant and off-resonant Rydberg-field interactions to realize broadband RF measurements at frequencies ranging from ~10 MHz to sub-THz over a wide dynamic range. The RFMS incorporates an RF-field-free atomic reference and a laser-frequency tracker to ensure reliability and accuracy of the RF measurement. We characterize the RFP and measure polar field and polarization patterns of the RFP at 12.6 GHz RF in the far-field of a standard gain horn antenna. Measurements at 2.5 GHz are also performed. Measured patterns are in good agreement with simulations. A detailed calibration procedure and uncertainty analysis are presented that account for deviations from an isotropic response over a $4pi$ solid angle, arising from dielectric structures external to the atomic measurement volume. Contributions to the measurement uncertainty from the fundamental atomic measurement method and associated analysis as well as material, geometry, and hardware design choices are accounted for. A calibration (C) factor is used to establish absolute-standard SI-traceable calibration of the RFP. Pulsed and modulated RF field measurement, and time-domain RF-pulse waveform imaging are also demonstrated.
We demonstrate a new technique for detecting components of arbitrarily-shaped radio-frequency waveforms based on stroboscopic back-action evading measurements. We combine quantum non-demolition measurements and stroboscopic probing to detect waveform components with magnetic sensitivity beyond the standard quantum limit. Using an ensemble of $1.5times 10^6$ cold rubidium atoms, we demonstrate entanglement-enhanced sensing of sinusoidal and linearly chirped waveforms, with 1.0(2)dB and 0.8(3)dB metrologically relevant noise reduction, respectively. We achieve volume-adjusted sensitivity of $deltarm{B}sqrt{V}approx 11.20~rm{fTsqrt{cm^3/Hz}}$, comparable to the best RF~magnetometers.
We theoretically investigate trapped ions interacting with atoms that are coupled to Rydberg states. The strong polarizabilities of the Rydberg levels increases the interaction strength between atoms and ions by many orders of magnitude, as compared to the case of ground state atoms, and may be mediated over micrometers. We calculate that such interactions can be used to generate entanglement between an atom and the motion or internal state of an ion. Furthermore, the ion could be used as a bus for mediating spin-spin interactions between atomic spins in analogy to much employed techniques in ion trap quantum simulation. The proposed scheme comes with attractive features as it maps the benefits of the trapped ion quantum system onto the atomic one without obviously impeding its intrinsic scalability. No ground state cooling of the ion or atom is required and the setup allows for full dynamical control. Moreover, the scheme is to a large extent immune to the micromotion of the ion. Our findings are of interest for developing hybrid quantum information platforms and for implementing quantum simulations of solid state physics.
Rydberg atom-based electrometry enables traceable electric field measurements with high sensitivity over a large frequency range, from gigahertz to terahertz. Such measurements are particularly useful for the calibration of radio frequency and terahertz devices, as well as other applications like near field imaging of electric fields. We utilize frequency modulated spectroscopy with active control of residual amplitude modulation to improve the signal to noise ratio of the optical readout of Rydberg atom-based radio frequency electrometry. Matched filtering of the signal is also implemented. Although we have reached similarly, high sensitivity with other read-out methods, frequency modulated spectroscopy is advantageous because it is well-suited for building a compact, portable sensor. In the current experiment, $sim 3 mu V cm^{-1}Hz^{-1/2}$ sensitivity is achieved and is found to be photon shot noise limited.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
