Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEnhanced ordering in length-polydisperse carbon nanotube solutions at high concentrations as revealed by small angle X-ray scattering
102
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Carbon nanotubes (CNTs) are stiff, all-carbon macromolecules with diameters as small as one nanometer and few microns long. Solutions of CNTs in chlorosulfonic acid (CSA) follow the phase behavior of rigid rod polymers interacting via a repulsive potential and display a liquid crystalline phase at sufficiently high concentration. Here, we show that small-angle X-ray scattering and polarized light microscopy data can be combined to characterize quantitatively the morphology of liquid crystalline phases formed in CNT solutions at concentrations from 3 to 6.5 % by volume. We find that upon increasing their concentration, CNTs self-assemble into a liquid crystalline phase with a pleated texture and with a large inter-particle spacing that could be indicative of a transition to higher-order liquid crystalline phases. We explain how thermal undulations of CNTs can enhance their electrostatic repulsion and increase their effective diameter by an order of magnitude. By calculating the critical concentration, where the mean amplitude of undulation of an unconstrained rod becomes comparable to the rod spacing, we find that thermal undulations start to affect steric forces at concentrations as low as the isotropic cloud point in CNT solutions.
rate research
Read More
We demonstrate that highly-ordered two-dimensional crystals of ligand-capped gold nanoparticles display a local photo-mechanical stiffness as high as that of solids such as graphite. In out-of equilibrium electron diffraction experiments, a strong temperature jump is induced in a thin film with a femtosecond laser pulse. The initial electronic excitation transfers energy to the underlying structural degrees of freedom, with a rate generally proportional to the stiffness of the material. With femtosecond small-angle electron diffraction, we observe the temporal evolution of the diffraction feature associated to the nearest-neighbor nanoparticle distance. The Debye-Waller decay for the octanethiol-capped nanoparticles supracrystal, in particular, is found to be unexpectedly fast, almost as fast as the stiffest solid known and observed by the same technique, i.e. graphite. Our observations unravel that local stiffness in a dense supramolecular assembly can be created by Van der Waals interactions up to a level comparable to crystalline systems characterized by covalent bonding.
The ability to manipulate individual atoms and molecules using a scanning tunnelling microscope (STM) has been crucial for the development of a vast array of atomic scale devices and structures ranging from nanoscale motors and switches to quantum corrals. Molecular motors in particular have attracted considerable attention in view of their potential for assembly into complex nanoscale machines. Whereas the manipulated atoms or molecules are usually on top of a substrate, motors embedded in a lattice can be very beneficial for bottom-up construction, and may additionally be used to probe the in uence of the lattice on the electronic properties of the host material. Here, we present the discovery of controlled manipulation of a rotor in Fe doped Bi$_{2}$Se$_{3}$. We find that the current into the rotor, which can be finely tuned with the voltage, drives omni-directional switching between three equivalent orientations, each of which can be frozen in at small bias voltage. Using current fluctuation measurements at 1MHz and model simulations, we estimate that switching rates of hundreds of kHz for sub-nA currents are achieved.
Temperature dependence of the electronic structure of SmB6 is studied by high-resolution ARPES down to 1 K. We demonstrate that there is no essential difference for the dispersions of the surface states below and above the resistivity saturating anomaly (~ 3.5 K). Quantitative analyses of the surface states indicate that the quasi-particle scattering rate increases linearly as a function of temperature and binding energy, which differs from Fermi-Liquid behavior. Most intriguingly, we observe that the hybridization between the d and f states builds gradually over a wide temperature region (30 K < T < 110 K). The surface states appear when the hybridization starts to develop. Our detailed temperature-dependence results give a complete interpretation of the exotic resistivity result of SmB6, as well as the discrepancies among experimental results concerning the temperature regions in which the topological surface states emerge and the Kondo gap opens, and give new insights into the exotic Kondo crossover and its relationship with the topological surface states in the topological Kondo insulator SmB6.
A fabrication method for positioning and embedding a single-walled carbon nanotube (SWNT) across the diameter of a solid state nanopore is presented. Chemical vapor deposition (CVD) is used to grow SWNTs over arrays of focused ion beam (FIB) milled pores in a thin silicon nitride membrane. This typically yields at least one pore whose diameter is centrally crossed by a SWNT. The final diameter of the FIB pore is adjusted to create a nanopore of any desired diameter by atomic layer deposition (ALD), simultaneously embedding and insulating the SWNT everywhere but in the region that crosses the diameter of the final nanopore, where it remains pristine and bare. This nanotube-articulated nanopore is an important step towards the realization of a new type of detector for biomolecule sensing and electronic characterization, including DNA sequencing.
We have contacted single wall carbon nanotubes grown by chemical vapor deposition to superconducting Ti/Al/Ti electrodes. The device, we here report on is in the Kondo regime exhibiting a four-fold shell structure, where a clear signature of the superconducting electrodes is observed below the critical temperature. Multiple Andreev reflections are revealed by sub-gap structure and a narrow peak in the differential conductance around zero bias is seen depending on the shell filling. We interpret the peak as a proximity induced supercurrent and examine its interplay with Kondo resonances.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
