Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userJoint Radar and Communication Design: Applications, State-of-the-art, and the Road Ahead
75
0
0.0
(
0
)
Added by
Fan Liu
Publication date
2019
fields
Electronic Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
In this paper, we firstly overview the application scenarios and the research progress in the area of communication and radar spectrum sharing (CRSS). We then propose a novel transceiver architecture and frame structure for a dual-functional radar-communication (DFRC) base station (BS) operating in the millimeter wave (mmWave) band, using the hybrid analog-digital (HAD) beamforming technique. We assume that the BS is serving a multi-antenna aided user equipment (UE) operating in a mmWave channel, which in the meantime actively detects multiple targets. Note that part of the targets also play the role of scatterers for the communication signal. Given this framework, we propose a novel scheme for joint target search and communication channel estimation relying on the omni-directional pilot signals generated by the HAD structure. Given a fully-digital communication precoder and a desired radar transmit beampattern, we propose to design the analog and digital precoders under non-convex constant-modulus (CM) and power constraints, such that the BS can formulate narrow beams towards all the targets, while pre-equalizing the impact of the communication channel. Furthermore, we design an HAD receiver that can simultaneously process signals from the UE and echo waves from the targets. By tracking the angular variation of the targets, we show that it is possible to recover the target echoes and mitigate the potential interference imposed on the UE signals by invoking the successive interference cancellation (SIC) technique, even when the radar and communication signals share the equivalent signal-to-noise ratio (SNR). The feasibility and the efficiency of the proposed approaches in realizing DFRC are verified via numerical simulations. Finally, our discussions are summarized by overviewing the open problems in the research field of CRSS.
rate research
Read More
In this paper, we propose multi-input multi-output (MIMO) beamforming designs towards joint radar sensing and multi-user communications. We employ the Cramer-Rao bound (CRB) as a performance metric of target estimation, under both point and extended target scenarios. We then propose minimizing the CRB of radar sensing while guaranteeing a pre-defined level of signal-to-interference-plus-noise ratio (SINR) for each communication user. For the single-user scenario, we derive a closed form for the optimal solution for both cases of point and extended targets. For the multi-user scenario, we show that both problems can be relaxed into semidefinite programming by using the semidefinite relaxation approach, and prove that the global optimum can always be obtained. Finally, we demonstrate numerically that the globally optimal solutions are reachable via the proposed methods, which provide significant gains in target estimation performance over state-of-the-art benchmarks.
The engineering community is witnessing a new frontier in the communication industry. Among others, the tools provided by nanotechnologies enable the development of novel nanosensors and nanomachines. On the one hand, nanosensors are capable of detecting events with unprecedented accuracy. On the other hand, nanomachines are envisioned to accomplish tasks ranging from computing and data storing to sensing and actuation. Recently, in vivo wireless nanosensor networks (iWNSNs) have been presented to provide fast and accurate disease diagnosis and treatment. These networks are capable of operating inside the human body in real time and will be of great benefit for medical monitoring and medical implant communication. Despite the fact that nanodevice technology has been witnessing great advancements, enabling the communication among nanomachines is still a major challenge.
Future wireless communication systems are expected to explore spectral bands typically used by radar systems, in order to overcome spectrum congestion of traditional communication bands. Since in many applications radar and communication share the same platform, spectrum sharing can be facilitated by joint design as dual function radar-communications system. In this paper, we propose a joint transmit beamforming model for a dual-function multiple-input-multiple-output (MIMO) radar and multiuser MIMO communication transmitter sharing the spectrum and an antenna array. The proposed dual-function system transmits the weighted sum of independent radar waveform and communication symbols, forming multiple beams towards the radar targets and the communication receivers, respectively. The design of the weighting coefficients is formulated as an optimization problem whose objective is the performance of the MIMO radar transmit beamforming, while guaranteeing that the signal-to-interference-plus-noise ratio (SINR) at each communication user is higher than a given threshold. Despite the non-convexity of the proposed optimization problem, it can be relaxed into a convex one, which can be solved in polynomial time, and we prove that the relaxation is tight. Then, we propose a reduced complexity design based on zero-forcing the inter-user interference and radar interference. Unlike previous works, which focused on the transmission of communication symbols to synthesize a radar transmit beam pattern, our method provides more degrees of freedom for MIMO radar and is thus able to obtain improved radar performance, as demonstrated in our simulation study. Furthermore, the proposed dual-function scheme approaches the radar performance of the radar-only scheme, i.e., without spectrum sharing, under reasonable communication quality constraints.
A novel dual-function radar communication (DFRC) system is proposed, that achieves high target resolution and high communication rate. It consists of a multiple-input multiple-output (MIMO) radar, where only a small number of antennas are active in each channel use. The probing waveforms are orthogonal frequency division multiplexing (OFDM) type. The OFDM carriers are divided into two groups, one that is used by the active antennas in a shared fashion, and another one, where each subcarrier is assigned to an active antenna in an exclusive fashion (private subcarriers). Target estimation is carried out based on the received and transmitted symbols. The system communicates information via the transmitted OFDM data symbols and the pattern of active antennas in a generalized spatial modulation (GSM) fashion. A multi-antenna communication receiver can identify the indices of active antennas via sparse signal recovery methods. The use of shared subcarriers enables high communication rate. The private subcarriers are used to synthesize a virtual array for high angular resolution, and also for improved estimation on the active antenna indices. The OFDM waveforms allow the communication receiver to easily mitigate the effect of frequency selective fading, while the use of a sparse array at the transmitter reduces the hardware cost of the system. The radar performance of the proposed DFRC system is evaluated via simulations, and bit error rate (BER) results for the communication system are provided.
Mobile network is evolving from a communication-only network towards the one with joint communication and radio/radar sensing (JCAS) capabilities, that we call perceptive mobile network (PMN). Radio sensing here refers to information retrieval from received mobile signals for objects of interest in the environment surrounding the radio transceivers. In this paper, we provide a comprehensive survey for systems and technologies that enable JCAS in PMN, with a focus on works in the last ten years. Starting with reviewing the work on coexisting communication and radar systems, we highlight their limits on addressing the interference problem, and then introduce the JCAS technology. We then set up JCAS in the mobile network context, and envisage its potential applications. We continue to provide a brief review for three types of JCAS systems, with particular attention to their differences on the design philosophy. We then introduce a framework of PMN, including the system platform and infrastructure, three types of sensing operations, and signals usable for sensing, and discuss required system modifications to enable sensing on current communication-only infrastructure. Within the context of PMN, we review stimulating research problems and potential solutions, organized under eight topics: mutual information, waveform optimization, antenna array design, clutter suppression, sensing parameter estimation, pattern analysis, networked sensing under cellular topology, and sensing-assisted secure communication. This paper provides a comprehensive picture for the motivation, methodology, challenges, and research opportunities of realizing PMN. The PMN is expected to provide a ubiquitous radio sensing platform and enable a vast number of novel smart applications.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
