Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVelocity Saturation in La-doped BaSnO3 Thin Films
295
0
0.0
(
0
)
Added by
Hareesh Chandrasekar
Publication date
2019
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
BaSnO_{3}, a high mobility perovskite oxide, is an attractive material for oxide-based electronic devices. However, in addition to low-field mobility, high-field transport properties such as the saturation velocity of carriers play a major role in determining device performance. We report on the experimental measurement of electron saturation velocity in La-doped BaSnO_{3} thin films for a range of doping densities. Predicted saturation velocities based on a simple LO-phonon emission model using an effective LO phonon energy of 120 meV show good agreement with measurements of velocity saturation in La-doped BaSnO_{3} films.. Density-dependent saturation velocity in the range of 1.6x10^{7} cm/s reducing to 2x10^{6} cm/s is predicted for {delta}-doped BaSnO3 channels with carrier densities ranging from 10^{13} cm^{-2} to 2x10^{14} cm^{-2} respectively. These results are expected to aid the informed design of BaSnO3 as the active material for high-charge density electronic transistors.
rate research
Read More
Doping ferroelectric Hf0.5Zr0.5O2 with La is a promising route to improve endurance. However, the beneficial effect of La on the endurance of polycrystalline films may be accompanied by degradation of the retention. We have investigated the endurance - retention dilemma in La-doped epitaxial films. Compared to undoped epitaxial films, large values of polarization are obtained in a wider thickness range, whereas the coercive fields are similar, and the leakage current is substantially reduced. Compared to polycrystalline La-doped films, epitaxial La-doped films show more fatigue but there is not significant wake-up effect and endurance-retention dilemma. The persistent wake-up effect common to polycrystalline La-doped Hf0.5Zr0.5O2 films, is limited to a few cycles in epitaxial films. Despite fatigue, endurance in epitaxial La-doped films is more than 1010 cycles, and this good property is accompanied by excellent retention of more than 10 years. These results demonstrate that wake-up effect and endurance-retention dilemma are not intrinsic in La-doped Hf0.5Zr0.5O2.
As a unique perovskite transparent oxide semiconductor, high-mobility La-doped BaSnO3 films have been successfully synthesized by molecular beam epitaxy and pulsed laser deposition. However, it remains a big challenge for magnetron sputtering, a widely applied technique suitable for large-scale fabrication, to grow high-mobility La-doped BaSnO3 films. Here, we developed a method to synthesize high-mobility epitaxial La-doped BaSnO3 films (mobility up to 121 cm2V-1s-1 at the carrier density ~ 4.0 x 10^20 cm-3 at room temperature) directly on SrTiO3 single crystal substrates using high-pressure magnetron sputtering. The structural and electrical properties of the La-doped BaSnO3 films were characterized by combined high-resolution X-ray diffraction, X-ray photoemission spectroscopy, and temperature-dependent electrical transport measurements. The room temperature electron mobility of La-doped BaSnO3 films in this work is 2 to 4 times higher than the reported values of the films grown by magnetron sputtering. Moreover, in the high carrier density range (n > 3 x 10^20 cm-3), the electron mobility value of 121 cm2V-1s-1 in our work is among the highest values for all reported doped BaSnO3 films. It is revealed that high argon pressure during sputtering plays a vital role in stabilizing the fully relaxed films and inducing oxygen vacancies, which benefit the high mobility at room temperature. Our work provides an easy and economical way to massively synthesize high-mobility transparent conducting films for transparent electronics.
Wide-bandgap perovskite stannates are of interest for the emergent all-oxide transparent electronic devices due to their unparalleled room temperature electron mobility. Considering the advantage of amorphous material in integrating with non-semiconductor platforms, we herein reported the optical and electronic properties in the prototypical stannate, amorphous barium stannate (BaSnO3) thin films, which were deposited at room temperature and annealed at various temperatures. Despite remaining amorphous status, with increasing the annealing temperature, the defect level within amorphous BaSnO3 thin films could be suppressed.
The structure of domain walls delimiting magnetic bubbles in L10 FePd thin layers is described on the basis of Lorentz transmission electron microscopy (LTEM) and multiscale magnetic simulations. Images obtained by high resolution LTEM show the existence of magnetization reversal areas inside domain walls, called vertical Bloch lines (VBLs). Combining these observations and multiscale simulations on various geometries, we can identify the structure of these VBLs, notably the presence or not of magnetic singularities.
Electrodynamic properties of La-doped SrTiO3 thin films with controlled elemental vacancies have been investigated using optical spectroscopy and thermopower measurement. In particular, we observed a correlation between the polaron formation and thermoelectric properties of the transition metal oxide (TMO) thin films. With decreasing oxygen partial pressure during the film growth (P(O2)), a systematic lattice expansion was observed along with the increased elemental vacancy and carrier density, experimentally determined using optical spectroscopy. Moreover, we observed an absorption in the mid-infrared photon energy range, which is attributed to the polaron formation in the doped SrTiO3 system. Thermopower of the La-doped SrTiO3 thin films could be largely modulated from -120 to -260 {mu}V K-1, reflecting an enhanced polaronic mass of ~3 < mpolron/m < ~4. The elemental vacancies generated in the TMO films grown at various P(O2) influences the global polaronic transport, which governs the charge transport behavior, including the thermoelectric properties.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
