Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe thermal, mechanical, structural, and dielectric properties of cometary nuclei after Rosetta
91
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The physical properties of cometary nuclei observed today relate to their complex history and help to constrain their formation and evolution. In this article, we review some of the main physical properties of cometary nuclei and focus in particular on the thermal, mechanical, structural and dielectric properties, emphasizing the progress made during the Rosetta mission. Comets have a low density of 480 $pm$ 220 kg m-3 and a low permittivity of 1.9 - 2.0, consistent with a high porosity of 70 - 80 %, are weak with a very low global tensile strength $<$100 Pa, and have a low bulk thermal inertia of 0 - 60 J K-1 m-2 s-1/2 that allowed them to preserve highly volatiles species (e.g. CO, CO2, CH4, N2) into their interior since their formation. As revealed by 67P/Churyumov-Gerasimenko, the above physical properties vary across the nucleus, spatially at its surface but also with depth. The broad picture is that the bulk of the nucleus consists of a weakly bonded, rather homogeneous material that preserved primordial properties under a thin shell of processed material, and possibly covered by a granular material; this cover might in places reach a thickness of several meters. The properties of the top layer (the first meter) are not representative of that of the bulk nucleus. More globally, strong nucleus heterogeneities at a scale of a few meters are ruled out on 67P small lobe.
rate research
Read More
We present a possible correlation between the properties of scattered and thermal radiation from dust and the principal dust characteristics responsible for this relationship. To this end, we use the NASA/PDS archival polarimetric data on cometary dust in the Red (0.62--0.73 $mu$m) and K (2.00--2.39 $mu$m) domains to leverage the relative excess of the polarisation degree of a comet to the average trend at the given phase angle ($P_{rm excess}$) as a metric of the dusts scattered light characteristics. The flux excess of silicate emissions to the continuum around 10 $mu$m ($F_{rm Si}/F_{rm cont}$) is adopted from previous studies as a metric of the dusts MIR feature. The two metrics show a positive correlation when $P_{rm excess}$ is measured in the K domain. No significant correlation was identified in the Red domain. The gas-rich comets have systematically weaker $F_{rm Si}/F_{rm cont}$ than the dust-rich ones, yet both groups retain the same overall tendency with different slope values. The observed positive correlation between the two metrics indicates that composition is a peripheral factor in characterising the dusts polarimetric and silicate emission properties. The systematic difference in $F_{rm Si}/F_{rm cont}$ for gas-rich versus dust-rich comets would rather correspond with the difference in their dust size distribution. Hence, our results suggest that the current MIR spectral models of cometary dust should prioritise the dust size and porosity over the composition. With light scattering being sensitive to different size scales in two wavebands, we expect the K-domain polarimetry to be sensitive to the properties of dust aggregates, such as size and porosity, which might have been influenced by evolutionary processes. On the other hand, the Red-domain polarimetry reflects the characteristics of sub-$mu$m constituents in the aggregate.
We report new lightcurves and phase functions for nine Jupiter-family comets (JFCs). They were observed in the period 2004-2015 with various ground telescopes as part of the Survey of Ensemble Physical Properties of Cometary Nuclei (SEPPCoN) as well as during devoted observing campaigns. We add to this a review of the properties of 35 JFCs with previously published rotation properties. The photometric time-series were obtained in Bessel R, Harris R and SDSS r filters and were absolutely calibrated using stars from the Pan-STARRS survey. This specially-developed method allowed us to combine data sets taken at different epochs and instruments with absolute-calibration uncertainty down to 0.02 mag. We used the resulting time series to improve the rotation periods for comets 14P/Wolf, 47P/Ashbrook-Jackson, 94P/Russell, and 110P/Hartley 3 and to determine the rotation rates of comets 93P/Lovas and 162P/Siding-Spring for the first time. In addition to this, we determined the phase functions for seven of the examined comets and derived geometric albedos for eight of them. We confirm the known cut-off in bulk densities at $sim$0.6 g $mathrm{cm^{-3}}$ if JFCs are strengthless. Using the model of Davidsson (2001) for prolate ellipsoids with typical density and elongations, we conclude that none of the known JFCs require tensile strength larger than 10-25 Pa to remain stable against rotational instabilities. We find evidence for an increasing linear phase function coefficient with increasing geometric albedo. The median linear phase function coefficient for JFCs is 0.046 mag/deg and the median geometric albedo is 4.2 per cent.
Dust jets, i.e. fuzzy collimated streams of cometary material arising from the nucleus, have been observed in-situ on all comets since the Giotto mission flew by comet 1P/Halley in 1986. Yet their formation mechanism remains unknown. Several solutions have been proposed, from localized physical mechanisms on the surface/sub-surface (see review in Belton (2010)) to purely dynamical processes involving the focusing of gas flows by the local topography (Crifo et al. 2002). While the latter seems to be responsible for the larger features, high resolution imagery has shown that broad streams are composed of many smaller features (a few meters wide) that connect directly to the nucleus surface. We monitored these jets at high resolution and over several months to understand what are the physical processes driving their formation, and how this affects the surface. Using many images of the same areas with different viewing angles, we performed a 3-dimensional reconstruction of collimated jets, and linked them precisely to their sources on the nucleus. Results.We show here observational evidence that the Northern hemisphere jets of comet 67P arise from areas with sharp topographic changes and describe the physical processes involved. We propose a model in which active cliffs are the main source of jet-like features, and therefore the regions eroding the fastest on comets. We suggest that this is a common mechanism taking place on all comets.
Due to their outstanding mechanical properties, diamond and diamond-like materials find significant technological applications ranging from well-established industrial fields (cutting tools, coatings, etc.) to more advanced mechanical devices as micro- and nano-electromechanical systems. The use of energetic ions is a powerful and versatile tool to fabricate three-dimensional micro-mechanical structures. In this context, it is of paramount importance to have an accurate knowledge of the effects of ion-induced structural damage on the mechanical properties of this material, firstly to predict potential undesired side-effects of the ion implantation process, and possibly to tailor the desired mechanical properties of the fabricated devices. We present an Atomic Force Microscopy (AFM) characterization of free-standing cantilevers in single-crystal diamond obtained by a FIB-assisted lift-off technique, which allows a determination of the Youngs modulus of the diamond crystal after the MeV ion irradiation process concurrent to the fabrication of the microstructures, and subsequent thermal annealing. The AFM measurements were performed with the beam-bending technique and show that the thermal annealing process allows for an effective recovery of the mechanical properties of the pristine crystal.
Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have been modified during their collection by the spacecraft instruments. Here we present the results of laboratory experiments that simulate the impact of dust on the collection surfaces of COSIMA and MIDAS, instruments onboard the Rosetta spacecraft. We map the size and structure of the footprints left by the dust particles as a function of their initial size (up to several hundred um) and velocity (up to 6 m/s). We find that in most collisions, only part of the dust particle is left on the target; velocity is the main driver of the appearance of these deposits. A boundary between sticking/bouncing and fragmentation as an outcome of the particle-target collision is found at v ~ 2 m/s. For velocities below this value, particles either stick and leave a single deposit on the target plate, or bounce, leaving a shallow footprint of monomers. At velocities > 2 m/s and sizes > 80 um, particles fragment upon collision, transferring up to 50 per cent of their mass in a rubble-pile-like deposit on the target plate. The amount of mass transferred increases with the impact velocity. The morphologies of the deposits are qualitatively similar to those found by the COSIMA instrument.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
