Do you want to publish a course? Click here

Ultra-Stable Environment Control for the NEID Spectrometer: Design and Performance Demonstration

112   0   0.0 ( 0 )
 Added by Paul Robertson
 Publication date 2019
  fields Physics
and research's language is English




Ask ChatGPT about the research

Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEIDs optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.

rate research

Read More

Organized Autotelescopes for Serendipitous Event Survey (OASES) is an optical observation project that aims to detect and investigate stellar occultation events by kilometer-sized trans-Neptunian objects (TNOs). In this project, multiple low-cost observation systems for wide-field and high-speed photometry were developed in order to detect rare and short-timescale stellar occultation events. The observation system consists of commercial off-the-shelf $0.28 {rm m}$ aperture $f/1.58$ optics providing a $2.3 times 1.8$ square-degree field of view. A commercial CMOS camera is coupled to the optics to obtain full-frame imaging with a frame rate greater than $10 {rm Hz}$. As of September 2016, this project exploits two observation systems, which are installed on Miyako Island, Okinawa, Japan. Recent improvements in CMOS technology in terms of high-speed imaging and low readout noise mean that the observation systems are capable of monitoring $sim 2000$ stars in the Galactic plane simultaneously with magnitudes down to ${rm V} sim 13.0$, providing $sim 20%$ photometric precision in light curves with a sampling cadence of $15.4 {rm Hz}$. This number of monitored stars is larger than for any other existing instruments for coordinated occultation surveys. In addition, a precise time synchronization method needed for simultaneous occultation detection is developed using faint meteors. The two OASES observation systems are executing coordinated monitoring observations of a dense stellar field in order to detect occultations by kilometer-sized TNOs for the first time.
In the currently accepted model for cosmic baryon evolution, Cosmic Dawn and the Epoch of Reionization are significant times when first light from the first luminous objects emerged, transformed and subsequently ionized the primordial gas. The 21 cm hyperfine transition of neutral hydrogen, redshifted from these cosmic times to a frequency range of 40 to 200 MHz, has been recognized as an important probe of the physics of CD/EoR. The global 21-cm signal is predicted to be a spectral distortion of a few 10s to a few 100s of mK, which is expected to be present in the cosmic radio background as a trace additive component. SARAS, Shaped Antenna measurement of the background RAdio Spectrum, is a spectral radiometer purpose designed to detect the weak 21-cm signal from CD/EoR. An important subsystem of the radiometer, the digital correlation spectrometer, is developed around a high speed digital signal processing platform called pSPEC. pSPEC is built around two quad 10 bit analog-to-digital converters and a Virtex 6 field programmable gate array, with provision for multiple Gigabit Ethernet and 4.5 Gbps fibre optic interfaces. Here we describe the system design of the digital spectrometer, the pSPEC board, and the adaptation of pSPEC to implement a high spectral resolution of about 61 kHz, high dynamic range correlation spectrometer covering the entire CD/EoR band. As the SARAS radiometer is required to be deployed in remote locations where terrestrial radio frequency interference is a minimum, the spectrometer is designed to be compact, portable and operating off internal batteries. The paper includes an evaluation of the spectrometers susceptibility to radio frequency interference and capability to detect signals from CD/EoR.
Over the last decade, the vector-apodizing phase plate (vAPP) coronagraph has been developed from concept to on-sky application in many high-contrast imaging systems on 8-m class telescopes. The vAPP is an geometric-phase patterned coronagraph that is inherently broadband, and its manufacturing is enabled only by direct-write technology for liquid-crystal patterns. The vAPP generates two coronagraphic PSFs that cancel starlight on opposite sides of the point spread function (PSF) and have opposite circular polarization states. The efficiency, that is the amount of light in these PSFs, depends on the retardance offset from half-wave of the liquid-crystal retarder. Using different liquid-crystal recipes to tune the retardance, different vAPPs operate with high efficiencies ($>96%$) in the visible and thermal infrared (0.55 $mu$m to 5 $mu$m). Since 2015, seven vAPPs have been installed in a total of six different instruments, including Magellan/MagAO, Magellan/MagAO-X, Subaru/SCExAO, and LBT/LMIRcam. Using two integral field spectrographs installed on the latter two instruments, these vAPPs can provide low-resolution spectra (R$sim$30) between 1 $mu$m and 5 $mu$m. We review the design process, development, commissioning, on-sky performance, and first scientific results of all commissioned vAPPs. We report on the lessons learned and conclude with perspectives for future developments and applications.
This paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst The Planck LFI Radiometer Chain Assemblies (RCAs) have been calibrated in two dedicated cryogenic facilities. In this paper the facilities and the related instrumentation are described. The main satellite thermal interfaces for the single chains have to be reproduced and stability requirements have to be satisfied. Setup design, problems occurred and improving solutions implemented are discussed. Performance of the cryogenic setup are reported.
Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($sim$ 5$times$10$^{-7}$) and separations (1.5--5.2 $lambda$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا