Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSTM Study of Exfoliated Few Layer Black Phosphorus Annealed in Ultrahigh Vacuum
128
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bPs high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crystal in situ. Here we present a study of surface modifications on exfoliated bP flakes upon consecutive annealing steps, up to 550 C, well above the sublimation temperature of bP. In particular, our attention is focused on the temperature range 375 C - 400 C, when sublimation starts, and a controlled desorption from the surface occurs alongside with the formation of characteristic well-aligned craters. There is an open debate in the literature about the crystallographic orientation of these craters, whether they align along the zigzag or the armchair direction. Thanks to the atomic resolution provided by STM, we are able to identify the orientation of the craters with respect to the bP crystal: the long axis of the craters is aligned along the zigzag direction of bP. This allows us to solve the controversy, and, moreover, to provide insight in the underlying desorption mechanism leading to crater formation.
rate research
Read More
Recent experimental measurements of light absorption in few-layer black phosphorus (BP) reveal a series of high and sharp peaks, interspersed by pairs of lower and broader features. Here, we propose a theoretical model for these excitonic states in few-layer black phosphorus (BP) within a continuum approach for the in-plane degrees of freedom and a tight-binding approximation that accounts for inter-layer couplings. This yields excitonic transitions between different combinations of the sub-bands created by the coupled BP layers, which leads to a series of high and low oscillator strength excitonic states, consistent with the experimentally observed bright and dark exciton peaks, respectively. The main characteristics of such sub-band exciton states, as well as the possibility to control their energies and oscillator strengths via applied electric and magnetic fields, are discussed, towards a full understanding of the excitonic spectrum of few-layer BP and its tunability.
Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material, different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen and moisture, since the presence of uncontrolled oxidation can substantially change the behavior of the contacts. In this study, we investigate the influence of the metal used for the contacts to bP against the variability between different flakes and different samples, using three of the most used metals as contacts: Chromium, Titanium, and Nickel. Using the transfer length method, from an analysis of ten devices, both at room temperature and at low temperature, Ni results to be the best metal for Ohmic contacts to bP, providing the lowest contact resistance and minimum scattering between different devices. Moreover, we investigate the gate dependence of the current-voltage characteristics of these devices. In the accumulation regime, we observe good linearity for all metals investigated.
We realize p-p-p junctions in few-layer black phosphorus (BP) devices, and use magneto-transport measurements to study the equilibration and transmission of edge states at the interfaces of regions with different charge densities. We observe both full equilibration, where all edge channels equilibrate and are equally partitioned at the interfaces, and partial equilibration, where only equilibration only takes place among modes of the same spin polarization. Furthermore, the inner p-region with low-doping level in the junction can function as a filter for highly doped p-regions which demonstrates gate-tunable transmission of edge channels.
We employ a tight-binding parametrization based on the Slater Koster model in order to fit the band structures of single-layer, bilayer and bulk black phosphorus obtained from first-principles calculations. We find that our model, which includes 9 or 17 parameters depending on whether overlap is included or not, reproduces quite well the ab-initio band structures over a wide energy range, especially the occupied bands. We also find that the inclusion of overlap parameters improves the quality of the fit for the conduction bands. On the other hand, hopping and on-site energies are consistent throughout the different systems, which is an indication that our model is suitable for calculations on multilayer black phosphorus and more complex situations in which first-principles calculations become prohibitive, such as disordered systems and heterostructures with a large lattice mismatch. We also discuss the limitations of the model and how the fit procedure can be improved for a more accurate description of bands in the vicinity of the Fermi energy.
Black phosphorus (BP) has recently emerged as an alternative 2D semiconductor owing to its fascinating electronic properties such as tunable bandgap and high charge carrier mobility. The structural investigation of few-layer BP, such as identification of layer thickness and atomic-scale edge structure, is of great importance to fully understand its electronic and optical properties. Here we report atomic-scale analysis of few-layered BP performed by aberration corrected transmission electron microscopy (TEM). We establish the layer-number-dependent atomic resolution imaging of few-layer BP via TEM imaging and image simulations. The structural modification induced by the electron beam leads to revelation of crystalline edge and formation of BP nanoribbons. Atomic resolution imaging of BP clearly shows the reconstructed zigzag (ZZ) edge structures, which is also corroborated by van der Waals first principles calculations on the edge stability. Our study on the precise identification of BP thickness and atomic-resolution imaging of edge structures will lay the groundwork for investigation of few-layer BP, especially BP in nanostructured forms.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
